JBL Live Free 2 TWS Wireless Earphone User Guide
- June 5, 2024
- JBL
Table of Contents
JBL Live Free 2 TWS Wireless Earphone
Charging
Charging through A Qi-certified wireless charging pad (not included)
LED behaviors
TECH SPEC
- Model: LIVE FREE 2 TWS
- Driver size: 10 mm/ 0.4” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 4.9 g per pc (9.8 g combined)/
- 0.01 lbs per pc (0.02 lbs combined)
- Charging case: 43.7 g/ 0.094 lbs
- Earbud battery type: Lithium-ion Battery (45 mAh / 3.85 V)
- Charging case battery type: Lithium-ion Battery (620 mAh / 3.8 V)
- Charging time: 2 hrs from empty
- Wireless charging time: 4 hrs from empty
- Music play time with BT on
- and ANC off up to 7 hrs
- Music play time with BT on
- and ANC on up to 6 hrs
- Music play time with BT on
- and True Adaptive ANC on Up to 5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 32 ohm
- Sensitivity: 97 dB SPL@1 kHz
- Maximum SPL: 94 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.2
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter
- frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter
- power: < 9 dBm EIRP
- Bluetooth transmitter
- modulation: GFSK, π/4 QPSK, 8DPSK
- Maximum operation
- temperature: 45 °C
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-LFREETWS2) have also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.407W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters, and similar
accessories shall not contain metal parts in its assembly. The use of
accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that does not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT
CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>