NEEWER RGB-A111 Smartphone Cage Type LED Light Instruction Manual

June 5, 2024
NEEWER

RGB-A111 Smartphone Cage Type LED Light
Instruction Manual

Copyright
© 2021 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved.
This document is the sole property of Shenzhen Neewer Technology Co Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system, or translated in any form, by any means, without prior written permission from Shenzhen Neewer Technology Co., Ltd. Shenzhen Neewer Technology Co., Ltd reserves the right to change the content in this instruction manual at any time and without prior notice.
Version Control

Date Version number Description Issued by
09/18/2021 1.0 Smartphone cage type LED light Manual

Product Overview

Thank you for your purchase of the NEEWER® RGB-A111 Smartphone rig light!
The Neewer A111 RGB Smartphone rig fills light and features 188 integrated energy-saving LED beads, incorporating CCT bi-color, HSI, and FX modes to create a vibrant, luminous shooting environment. It can be directly connected to your Smartphone using the Bluetooth function to take photos and videos. The light is also supplied with two 2600 mAh F550 batteries making it the perfect accessory for live, outdoor shooting.

Package Contents

Product illustration

  1. Light diffusion panel
  2. Settings switch/adjustment
  3. Phone control buttons
  4. Display screen
  5. Battery compartment
  6. Mobile phone holder mount
  7. Power switch
  8. Mode select/brightness adjustment
  9. Power jack

Assembly Instructions

  1. Attaching the phone holder

1. Remove the adjustable screw from the rig by turning counterclockwise.

|

2. Unscrew the screw on the holder completely to allow you to reattach it to the support bracket.

3. Attach the bracket to the base of the Smartphone holder as shown and turn clockwise to secure.
• Please ensure the phone holder is installed in the correct direction.

|

4. Mount the Smartphone holder onto the fill light, and tighten the adjustable knob clockwise to secure.

  1. To mount the phone Insert the phone into the holder as shown.

Instructions for use

  1. Powering the fill light
    Option 1: The light can be powered using a dedicated battery. Insert a compatible battery into the compartment to use this power source.

Compaible battery types
** The light has two compartments for 2x F550 batteries
Note: The NP-F battery included in the kit can only power devices such as lights and electric sliders and is not compatible with Sony camcorders.
Option 2:** The light can also be powered using a DC9-12V power adapter. Plug the connector into the light’s input hole and the other end into the main power supply. • The power adapter is not included in the accessories

  1. Getting started
    To turn the panel light on/off.
    Flick the power switch to the “ON” position to turn on, and to the ‘OFF” position to turn off. When the device is turned on, the display will light up and the Bluetooth icon will flash. • A flashing Bluetooth icon indicates that no Bluetooth-enabled device has been connected.
    Mode select
    Short press the “MODE/DIM” dial to switch between CCT, HSI, and SCENE modes. • Brightness adjustment
    In any mode, rotate the “MODE/DIM” dial to set the brightness level of the light. • Color temperature adjustment
    Short press the “MODE/DIM” dial to switch to CCT mode. Next, turn the “SET/Fr dial to adjust the color temperature. • Hue adjustment
    Short press the ‘MODE/DIM’ dial to switch to HSI mode, then short press the- SET/FX” dial until the arrow points to the H symbol on the screen. Rotate the “SET/FX” dial to adjust the value. • Saturation adjustment
    Short press -the MODE/DIM” dial to switch to HSI mode, then short press the “SET/FX” dial until the arrow points to the S symbol on the screen. Rotate the “SET/FX” dial to adjust the value. • Scene
    Short press the ‘MODE/DIM” dial to switch to FX mode, then short press the “SET/FX” dial to explore the different scenes. Scene modes

  2. The fill light can control the phone via Bluetooth
    1. Turn on the unit using the power switch. The display is on, and the Bluetooth icon should be flashing. 2. Turn on the Bluetooth function on your mobile phone, search for devices, and select “NEEWER-Shutter” to connect. The on-screen Bluetooth icon will cease flashing once a successful connection has been made. 3. Open up the camera on your mobile phone to use the camera or video function and click the button to control the mobile phone to take pictures or video. When the camera or video function of the mobile phone is not used, press the button to adjust the volume of the mobile phone.

  3. Charging batteries
    When the battery power is getting low, use the supplied charger to charge the battery. When the charger indicator is red, it indicates the battery is charging and will turn green once the battery is fully charged.

Safety Notes

  1. Any mobile phones or power adapters are shown are for illustrative purposes only and need to be purchased separately.
  2. Please do not drop the product to prevent damage to the light or its components resulting from a strong impact.
  3. Please do not look directly at the fill light when in use as direct exposure to the light may cause visual impairment.
  4. Do not store the product near inflammable or volatile substances.
  5. Do not use the product in the rain or in a wet environment.
  6. When not in use, please turn off the power and remove the battery.
  7. When not in use, please keep the product in a well-ventilated, dry place away from heat sources and magnetic fields.

Product Specifications

Product model RCE-A111
Product size 336 x 248 X 35mm
Number of LED beads 188PCS
Input voltage DC 9 ∼ 12V
Maximum power 20W
Maximum illumination (10000K)24001ux@0.5m, 600Iux@lm
CRI 97+
TLCI 97+
Brightness adjustment 0 ∼ 100
Color temperature adjustment 2500 ∼ 10000K
Hue adjustment 0 ∼ 360
Saturation adjustment 0 ∼ 100
Battery capacity 2600mAn *2
Charger input voltage 5V/ 2A

FCC & ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standards) Operation is subject to the following two conditions: (1)this device may not cause harmful interference. and (2)this device must accept any interference received. including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible forcoSce could void the user’s authority to operate the equipment.
NOTE- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. it is noLathe that interference will not occur in a particular installation. If this equipment does harmful interference to radio or television reception. which can be determined by tumiS equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment.
Radiation Exposure Statement for camera This equipment should be installed and operated with a minimum distance of 0 cm between the radiator & your body.

Shenzhen Neewer Technology Co., Ltd.
Room 1903, Block A, Lu Shan Building No. 3023
Chunfeng Rd Luo Hu District, Shenzhen
Guangdong 518001, China
UK / REPI
Lingfeng Electronic (UK) Ltd
International House, 10 Churchill Way, Cardiff, CF10 2HE,
United Kingdom
EC / REPI
NW Formations Gm BH(for authorities only)
Hoferstrasse 9B, 71636 Ludwigsburg, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals