eurolite LIG0018163-000 LED PFE-20 WW Profile Spot User Manual

eurolite LIG0018163-000 LED PFE-20 WW Profile Spot

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.
Product features
Handy stage spotlight with 20 W COB LED, CRI > 90

•  CRI of >90
•  Locking possibility at the mounting bracket
•  4 shutter blades
•  Color filter frame included in delivery
•  Gobo holder for own gobos with an outside diameter of 42 mm, image diameter max. 18 mm, not included in delivery
•  Dimmer
•  Switch-mode power supply for operation between 100 and 240 volts
•  Ready for connection via power cord with safety-plug
•  LED: 1 x COB (chip-on-board) 20 W WW
•  The device is cooled by passive convection
•  Flicker-free projection

SAFETY INSTRUCTIONS

WARNING!
Please read the safety warnings carefully and only use the product as described in this manual to avoid accidental injury or damage.

Intended use

•  This device is a profile spotlight for professional lighting tasks. This device is designed for professional use in the field of event technology, e.g. on stage. It is not suitable for household lighting.
•  Only use the device according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
•  We do not assume any liability for material and personal damage caused by improper use or non-compliance with the safety instructions. In such cases, the warranty will be null and void.
•  Unauthorized rebuilds or modifications of the device are not permitted for reasons of safety and render the warranty invalid.

Danger due to electricity

•  The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
•  To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
•  Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never deactivate the protective ground of a mains cable. Failure to do so could possibly injure the user.
•  The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
•  Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
•  The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
•  Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
•  Unplug the device during lightning storms, when unused for long periods of time or before cleaning.
•  Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress.
•  Do not place any objects filled with liquids on the device.
•  Do not place any open sources of fire, such as burning candles, on or directly next to the device.
•  Make sure that objects cannot fall into the device, in particular metal parts.
•  Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
•  Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.

Danger to children and people with restricted abilities

•  This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
•  This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Warning – risk of burns and fire

•  The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range.
•  The housing temperature (Tc) can be up to 75°C during use. Avoid contact by persons and materials.
• Do not illuminate surfaces within 20 cm of the device. This value is indicated on the device by the symbol.
• Do not use the device near highly flammable materials. Always place the device at a location where sufficient air circulation is ensured. Leave 50 cm of free space around the device. Never cover the air vents of the housing.

Warning – risk of injuries

•  Do not look directly at the light source. Persons with light-sensitive epilepsy may suffer from epileptic seizures or fall unconscious.
•  Make sure that the product is set up or installed safely and expertly and prevented from falling down. Comply with the standards and rules that apply in your country, in particular EN 60598-2-17.
•  If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
•  The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
•  For overhead use, always secure the device with a secondary safety attachment such as a safety bond or safety net.
•  Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
•  For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.

Caution – material damage

•  This device must not be connected to the mains voltage by means of a dimmer.
•  Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.
•  Never switch the device on and off in short intervals. This will considerably reduce the service life of the device.
•  If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately. The resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it. Wait until the condensation has evaporated.
•  Please use the original packaging to protect the device against vibration, dust and moisture during transportation or storage.
•  If a serial number label is affixed to the device, do not remove the label as this would make the warranty void.

DESCRIPTION OF THE DEVICE

1.  Guide rail color filter frame
2.  Clip color filter frame
3.  Lens
4.  Lens tube
5.  Locking screw focus adjustment
6.  Shutter blade
7. Fastening screw barrel
8.  Fixation screw
9.  Hole for fastening the coupler
10.  Mounting bracket
11.  Rotary control dimmer
12.  Fuse holder
13.  Power input
14.  Safety eyelet

INSTALLATION

WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure that the device is installed securely and cannot fall down. The installation must be carried out by a specialist who is familiar with the hazards and the relevant regulations.

The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must never be fixed swinging freely in the room.

1. The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.

2. Block access below the work area and work from a stable platform when installing the device.

3. Use rigging hardware that is compatible with the structure and capable of bearing the weight of the device. Please refer to the “Accessories” section for a list of suitable rigging hardware.

4. Secure the device with a safety bond or other secondary attachment. This secondary safety attachment must be sufficiently dimensioned in accordance with the latest industrial safety regulations and constructed in a way that no part of the installation can fall down if the main attachment fails. An appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.

5. To align the device, release the fixation screws at the mounting bracket, adjust the desired inclination
   angle and tighten the fixation screws.

6.  After installation, the device requires inspections periodically to prevent the possibility of corrosion, deformation and looseness. 

POWER SUPPLY

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.

1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains outlet which is switchable.

OPERATION

After you connected the device to the mains, the device starts running.

Focus

Dimmer

Color filter frame

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lens, in particular, should be clean to ensure that light will be emitted at maximum brightness.

1.  Disconnect the device from power and allow it to cool before cleaning.
2.  Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may damage the surface. Make sure that no liquids can enter the device.
3.  The device must be dry before reapplying power.

There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as this may result in damage. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer.

Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

1. Disconnect the device from power and allow it to cool.
2. Open the fuse holder of the mains connection with a fitting screwdriver.
3. Remove the old fuse from the fuse holder and replace it with a new fuse.
4. Carefully push the fuse holder back into its position before reapplying power.

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product. You as the end-user are required by law (Battery Ordinance) to return all used batteries/ rechargeable batteries. Disposing of them in household waste is prohibited. You may return your used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment.

TECHNICAL SPECIFICATIONS

Power supply cord with safety plug (provided)
Fuse:| 5 x 20 mm, T 0.5 A Fuse replaceable
Lamp type:| LED lamp
LED:| 1 x COB (chip-on-board) 20 W WW
Color temperature:| 3000K
Gobos:| Outside diameter 42mm
Image diameter 18mm
Cooling:| Passive convection
Color rendering index (CRI) more than:| 95 Ra
Beam angle (1/2 peak):| 19°
Housing color:| Black

Dimension:

| Length: 22.2 cm
Width: 15.8 cm
Height: 20.3 cm
Weight:| 1.2 kg

Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>