PLEXGEAR CA101 5 Port Gigabit Switch Instructions
- June 17, 2024
- plexgear
Table of Contents
PLEXGEAR CA101 5 Port Gigabit Switch
Product Specifications
The power adapter for this product has the following specifications:
- Input voltage (V): AC 100-240 V
- Input AC frequency (Hz): 50-60 Hz
- Output voltage (V): DC 5.0 V
- Output current (A): 0.55 A
- Output power (W): 2.75 W
- Average active efficiency (%): 76.24 %
- No-load power consumption (W): 0.1 W
Product Usage Instructions
Step 1: Unboxing
Open the product packaging and carefully remove the power adapter.
Step 2: Connecting the Power Adapter
Locate the power input port on your device and plug the power adapter into it.
Step 3: Plugging into the Power Outlet
Connect the power adapter to a suitable power outlet. Ensure that the outlet voltage matches the input voltage specified in the product specifications.
Step 4: Powering On
Switch on your device using the designated power button or method.
Step 5: Charging or Powering Device
Your device will now start charging or receive power from the connected power adapter.
Step 6: Disconnecting the Power Adapter
To disconnect the power adapter, unplug it from both your device and the power outlet.
Step 7: Storing the Power Adapter
When not in use, store the power adapter in a safe and dry place.
Frequently Asked Questions
Q: Can I use a different power adapter with this product?
A: It is recommended to use the provided power adapter to ensure compatibility and optimal performance.
Q: Can I use this power adapter with devices other than the one it came with?
A: The power adapter can be used with devices that have matching input voltage and power requirements.
Q: What is the average active efficiency of the power adapter?
A: The average active efficiency of the power adapter is 76.24%.
Q: Does the power adapter consume any power when not in use?
A: The power adapter has a no-load power consumption of 0.1 W.
Art: 93668
Specifications
- Ports: 5x RJ45 (UTP)
- Data transfer: 10/100/1000 Mbps
- MID/MDIX: Yes, auto
- Backplane: 16 Gbps
- Power input: AC 100-240 V, 50/60 Hz
- Power output: 5 V/0.55 A
- Operating temperature: 0 °C to 45 °C
- Size: 100x68x24 mm
- In the box: Ethernet switch, power adapter, manual
Use
Table placement
Place the switch on a stable surface. Make sure to leave about 10 centimeters
of free space on the left and right-hand sides of the switch for ventilation.
Wall mounting
The switch can be mounted on a wall. The switch is equipped with two screw
installation slots on the bottom. Make sure to keep the indicator panel
exposed to be able to view the status of the switch.
Power on/off
Connect the power adapter to the power port of the switch and to a wall
outlet. The “PW” indicator lights up when the switch is powered on.
Connecting to router and devices
Connect an network cable between the any of the 5 LAN-ports on the switch and
a LAN port on your router. Connect your devices to any of the LAN ports 1-5 on
the switch with a network cable. Each LAN port has an individual indicator
that lights up when a device is connected, and the indicator flashes when data
passes through the port.
Safety information
- Use with provided power adapter only.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified personnel to avoid a hazard.
- Unplug the switch from power supply during lightning storms.
- Do not place any open flame sources, such as lit candles, on or near the switch.
- Do not attempt to service or disassemble the switch yourself.
- Never insert any objects into the switch, as you could then touch dangerous voltage points or short-circuit parts that could lead to fire or electric shock. Make sure that objects do not fall on the switch and that liquid is not spilled on the switch.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>