JBL QUANTUM610 HEADSET WIRELESS User Guide

: June 5, 2024
: JBL

Table of Contents

WHAT’S IN THE BOX
Requirements
OVERVIEW
POWER ON & CONNECT
SETUP
BUTTON COMMAND
First-time setup
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
Documents / Resources

QUANTUM610 HEADSET WIRELESS
User Guide JBL QUANTUM610 HEADSET WIRELESS

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine
Software requirements
PLATFORM: Windows 7 (64 bit) / Windows 10 (64 bit) only 500MB of free hard drive space for installation
Always use the latest version of Windows 10 for the most optimal experience on JBL QuantumENGINE
JBL QuantumSURROUND and DTS Headphone:X V2.0 are available on Windows only. Software installation is required.

WHAT’S IN THE BOX

JBL QUANTUM610 HEADSET WIRELESS - figure 1

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS
PLATFORM: WINDOWS 7 (64 BIT) / WINDOWS 10 (64 BIT) ONLY 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
SYSTEM COMPATIBILITY
PC I XBOrm I PLAYSTATION, H'” I MOBILE I MAC I VR

CONNECTIVITY| PC| PS4/PS5| XBOX™| NINTENDO SWITCH™| MOBILE| MAC| VR
---|---|---|---|---|---|---|---
3.5 mm Audio Cable| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo| Stereo
2.4G Wireless| JBL QuantumSURROUNDTM 5 UTS HEADPHONE X V2| Stereo| Not
Compatible| Stereo| Not
Compatible| Stereo| Stereo

OVERVIEW

JBL QUANTUM610 HEADSET WIRELESS - figure 2

01 Game audio-chat balance dial	09 Voice Focus Boom Microphone
02 Volume Control	10 Flat-fold ear cup
03 Detachable Windshield foam	11* Microphone Mute / unMute
04* Notification LED for mic mute / unmute	12 POWER / 2.4G LED
05* RGB-lit JBL logo	13 POWER ON / OFF slider
06 CHARGING LED	14 2.4G PAIRING BUTTON
07 3.5mm Audio Jack	15 Volume Control
08 USB-C port	16 MIC MUTE BUTTON

POWER ON & CONNECT

JBL QUANTUM610 HEADSET WIRELESS - figure 3

SETUP

JBL QUANTUM610 HEADSET WIRELESS - figure 4

BUTTON COMMAND

JBL QUANTUM610 HEADSET WIRELESS - figure 5

First-time setup

Connect the headset to your PC via a 2.4G USB wireless connection.
Go to “Sound Settings” -> “Sound Control Panel”.
Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set Default” -> “Default Device”.
Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
In your chat application select “JBL QUANTUM610 WIRELESS CHAT” as the default audio device.
Follow the onscreen instructions to personalize your sound settings.

JBL QUANTUM610 HEADSET WIRELESS - figure 6

MICROPHONE

JBL QUANTUM610 HEADSET WIRELESS - figure 7

CHARGING

JBL QUANTUM610 HEADSET WIRELESS - figure 8

LED BEHAVIOURS

JBL QUANTUM610 HEADSET WIRELESS - figure 9

TECH SPEC

Driver size:	50 mm Dynamic drivers
Frequency response:	20 Hz – 20 kHz
Microphone frequency response:	100 Hz -10 kHz
Max input power	30 mW
Sensitivity:	100 dB SPL @1 kHz / 1 mW
Maximum SPL:	95 dB
Microphone sensitivity:	-40 dBV/Pa @1 kHz
Impedance:	32 ohm
2.4G Wireless transmitter power:	<14 dBm
2.4G Wireless modulation:	GFSK, π/4 DQPSK
2.4G Wireless carrier frequency:	2400 MHz – 2483.5 MHz
Battery type:	Li-ion battery (3.7 V / 1000 mAh)
Power supply:	5 V 2 A
Charging time:	3 hrs
Music play time with RGB lighting off:	40 hrs
Microphone pickup pattern:	Unidirectional
Weight:	357 g

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610) have also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.013 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ610TM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.099 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLQ610

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in a violation of IC RF exposure guidelines.
Use only the supplied or approved antenna.
IC: 6132A-JBLQ610TM

FCC ID: APIJBLQ610