MINDSCOPE PRODUCTS Mr. Chill Talking Animated Snowman with Built in Projector and Speaker Instruction Manual
- June 6, 2024
- MINDSCOPE PRODUCTS
Table of Contents
MINDSCOPE PRODUCTS Mr. Chill Talking Animated Snowman with Built in
Projector and Speaker
MR.CHILL
- Power adapter not included, all USB power adapters are compatible (ie: mobile phone charger).
- Please do not open Mr. Chill in order to avoid damaging the unit.
- Maintain adequate ventilation, do not cover Mr. Chill the with objects such as cloth or other materials (except for the provided Mr. Chill hat)
- Please keep Mr. Chill away from direct rain, water or snow, covered porch outdoor setting is OK.
- Please disconnect/remove power source (USB cable) when not using for extended periods of time.
- Please do not disconnect the USB cable when Mr. Chill is ON. Switch OFF and then disconnect the USB cable.
- Do NOT drop or shake the unit.
- Please ensure that Mr. Chill is placed in temperatures within 20°F – 100°F
- Do not attempt to remove the hat. It is permanently fixed to Mr. Chill
Setup:
- Attach USB cable (INCLUDED)
- Use any USB power adapter (NOT INCLUDED)
- Plug USB power adapter (NOT INCLUDED)
- Switch power button
- Adjust controls
Still Mode:
Give Mr. Chill a decorative look by entering into still mode. Jack will not
run any animation but instead will maintain a still face. Press and hold the+
&- buttons simultaneously for 3 seconds to enter into still mode. To exit
press any button to resume animations.
Note: 45 minutes of video will continue on a loop until turned off
manually, there is no timer on Mr. Chill.
Connect with us:
pinterest.com/mindscope
facebook.com/mindscopeproducts
youtube.com/mindscope
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>