LAURA ASHLEY LXL124360 Milky White Glass Pendant Lamp Installation Guide

LAURA ASHLEY LXL124360 Milky White Glass Pendant Lamp

Product Information

Specifications

• Model : LXL124538
• Model : LXL124539

Product Usage Instructions

Installation Instructions

Before installing the product, please read the following instructions carefully:

1. Ensure that the main power source is turned off before installing the product.
2. Assemble the lamp according to the instructions in the drawing.
3. Connect the lamp to the mains supply with the terminal block.
4. Make sure that the cables are connected securely to the terminals on the device.
5. When the installation is complete, activate the power source and test the function.

FAQ

• Q: Can I install the product without turning off the main power source?
  • A : No, it is essential to turn off the main power source before installing the product to ensure safety.
• Q: How can I test the function of the lamp after installation?
  • A : Once the installation is complete and the power source is activated, simply turn on the lamp to test its function.
• Q: Can I use this product outdoors?
  • A : The user manual does not specify whether this product is  suitable for outdoor use. Please refer to the product documentation or contact customer support for more information.

Installation instructions

Read the instructions carefully before installing the product. Save the instructions manual for future reference.

• Installation only by persons with electro technical knowledge and experience.
• Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
• In case the product is made for indoor use, it should be used in a dry and clean environment only (IP20). Do not install or use the product outdoors. The product should not come in contact with water, damp or other fluids.
• The light source can get hot. Pull out the plug and let the light source cool down before replacing it.
• Only use a dry cloth for cleaning the product.

1. Warning : ensure that the main power source is turned off before installing the product.
2. Assemble the lamp according to the instructions in the drawing.
3. Connect the lamp to the mains supply with the terminal block.
4. Make sure that the cables are connected securely to the terminals on the device.
5. When the installation is complete, activate the power source and test the function

Notes on disposal

• The product is designated for separate collection at an appropriate collection point.
• Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.

Care

• Before cleaning the unit, disconnect it from the power outlet, if necessary. Do not use aggressive cleaning agents.

Warranty

• The unit has been carefully checked for defects. If nevertheless you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of purchase. Safety

General advices

• Read the manual carefully before use. Keep the manual for future
• Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.  donge i produce top at rogi defie If he product
• Do not modify the product in any way.
  • Do not expose the product to water or moisture (IP20)
  • Do not immerse the product into water (IP44 – IP66).
  • Keep the product away from heat sources.
  • Do not block the ventilation openings.
• Do not look directly into the light source of the LED lamp
  • Keep a minimum distance of >2 metres between the lamp and the surface  being illuminated.

Electrical safety

• To reduce risk of electrical shock, this product should only be opened by an authorized technician when service is required.
• Do not use the product it the cable or plug is damaged or detective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
• Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.

Warning

• The light source contained in this luminaire shall only be replaced by the manutacturer or his service agent or a similar qualified agent.
• Caution, risk or electric shock.
• The externd lexible cale or cord of this minie cannot be replaced t cord is damaged, destroyed.
  • This product is not a toy – please keep it inaccessible for children.

Disclaimer

• We reserve the right to make technical moditications without notice.
• We are not liable for damage arising from incorrect handling, improper use or wear or tear.

Documentation

• The product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all member states of the European Union. The product complies with all applicable specitications and regulations in the country of sales.
• The declaration of conformity is available upon request.

CE declaration

This product complies with the following directives:

• LVD: 2014/35/EU (Not applicable for solar products)
• EMC : 2014/30/EU
• RoHS : 2011/65/EU
• Additionally, for products with Radio transmitter units:
• RED : 2014/53/EU

• Imported by Lumen Import B.V.
• Postbus 15980, 1001 NL
• Amsterdam, the Netherlands

Made in China

Documents / Resources

| LAURA ASHLEY LXL124360 Milky White Glass Pendant Lamp [pdf] Installation Guide
LXL124360, LXL124360 Milky White Glass Pendant Lamp, Milky White Glass Pendant Lamp, Glass Pendant Lamp, Pendant Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>