JBL LIVE PRO 2 TWS BLK Live Pro 2 TWS True Wireless Noise Cancelling Earbuds User Guide

June 5, 2024
JBL

JBL LIVE PRO 2 TWS BLK Live Pro 2 TWS True Wireless Noise Cancelling

Earbuds

Charging

JBL LIVE PRO 2 TWS BLK Live Pro 2 TWS True Wireless Noise
Cancelling Earbuds-fig1

Led behaviors

JBL LIVE PRO 2 TWS BLK Live Pro 2 TWS True Wireless Noise
Cancelling Earbuds-fig2 JBL LIVE PRO 2 TWS BLK Live Pro 2 TWS True Wireless Noise
Cancelling Earbuds-fig3

TECH SPEC

  • Model: LIVE PRO 2 TWS
  • Driver size: 11 mm / 0.43” Dynamic Driver
  • Power supply: 5 V, 1 A
  • Earbud: 4.8 g per pc (9.6 g combined) / 0.01 lbs per pc (0.02 lbs combined)
  • Charging case: 59.8 g / 0.13 lbs
  • Earbud battery type: Lithium-ion polymer (65 mAh / 3.85 V)
  • Charging case battery type: Lithium-ion polymer (580 mAh / 3.8 V)
  • Charging time: 2 hrs from empty
  • Wireless charging time: 4 hrs from empty
  • Music play time with BT on and ANC off: up to 10 hrs
  • Music play time with BT on and ANC on: up to 8 hrs
  • Music play time with BT on and True Adaptive ANC on: up to 6 hrs
  • Frequency response: 20 Hz – 20 kHz
  • Impedance: 16 ohm
  • Sensitivity: 105 dB SPL@1 kHz
  • Maximum SPL: 93 dB
  • Microphone sensitivity: -38 dBV/Pa@1 kHz
  • Bluetooth version: 5.2
  • Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7 Bluetooth transmitter
  • frequency range: 2.4 GHz – 2.4835 GHz
  • Bluetooth transmitter
  • power: < 12 dBm EIRP
  • Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8-DPSK
  • Maximum operation temperature: 45°C

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-LIVEPRO2TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.106 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

Warning

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates. Alexa is not available in all languages and countries, Alexa features and functionality may vary by location. See www.amazon.com/alexa- availability for details.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals