inventor RS3ION-8L Rise Dehumidifier User Manual

inventor RS3ION-8L Rise Dehumidifier User Manual

Dear Consumer,
Congratulations on your choice!
What distinguishes, Rise dehumidifier from the rest of Inventor dehumidifiers series, is the unique design and the upgraded desiccant technology, that guarantee efficiency in facing humidity problems.
Please refer to this manual, to obtain full efficiency of the dehumidifier, through the guidelines included in the following pages and make savings via clever use of this device.

SAFETY & WARNING INSTRUCTIONS

• No children under the age of 8 should be permitted to operate this electric device. Be certain, that children, handicapped people, or people with the lack of knowledge and experience, must be supervised, depending the situation, by persons responsible for their well-being and do not undertake procedures such as the cleaning or the maintenance of this device.
• It is important that adequate supervision is provided and no minors are left unattended with this device.
• This dehumidifier is for domestic and small office use only. Do not use this device for commercial, industrial or marine use, and in areas with wet surfaces such as restrooms or shower rooms.
• This device should always be kept in an upright position to avoid any damage.
• All house exits (windows doors etc) where the dehumidifier is operating, should be shut.
• If water leakage appears within the unit, turn the unit off and disconnect the power cord.
• Before moving, unplug the device and manage to keep it in a vertical position in order to safely be transferred from one area to another..
• Be sure to empty the water whenever the water tank is full or when the device will not be used for a prolonged time.
• Always empty the water tank before storing the unit.
• If the unit is misplaced or tipped, unplug the power cord immediately. Make sure the unit is completely dry before resuming operation..
• Disconnect the device, if abnormal sounds, odors or smoke occur.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard. Never attempt to dismantle, repair or modify the device.
• Do not attempt to repair, dismantle or modify this appliance. Contact your authorized service technician for repair or maintenance of this device.
• Do not operate or stop the unit by switching the power supply on or off.
• Do not insert any objects in the unit’s air inlet and exhaust as this may cause damage to the device.
• Do not place heavy objects on the power cord. Make sure that the cord is not compressed.
• Do not place cord under any obstacles (carpets rugs or runners etc). Cord should be arranged away from areas where accidental tripping may occur.
• Do not sit or climb on the device.
• Do not place the unit in direct sunlight or near other heating sources.
• Do not use the unit near heat sources, chemicals, radiators, flammable materials or fire.
• Do not remove the water tank while the device is in use.
• Do not use the device without the filter. Dirt and lint may clog the unit thus reducing performance.
• Do not drink or use the collected water from of the unit for any purpose.
• Do not use the unit with wet hands.

ELECTRICAL INFORMATION

• The nameplate, with all the electrical and technical data of this appliance, is located on the rear panel.
• The appliance should be installed in accordance with national wiring regulations.
• Be sure the device is grounded properly. Proper grounding is important as it minimizes the chance of electric shock or fire. The power cord is equipped with a grounding plug for protection against electric shock hazards.
• The device must be used in a properly grounded wall socket. If the specific socket you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.
• Ensure the wall socket is still accessible after the installation of the dehumidifier.
• Do not use extension cords or adapter plugs with this device.
• To avoid personal injury, always disconnect the power supply of the device, before maintenance.
• To connect or disconnect the power, grip the plug and pull it out from power socket, never pull or tug on the cord.

Power off the dehumidifier before removing the plug.
Never unplug the unit before the fan has stopped blowing.

Using a mechanical timer switch or an auto shut-off switch (smart socket) is not recommended.
Continuous power cuts may result in decreasing the lifespan of the unit.

SOCIABLE REMARKS ENVIRONMENTAL PROTECTION

Disposal of equipment no longer used.
Please follow the instructions below, when using this dehumidifier in European countries.

• This appliance requires special treatment for disposal. In the European Union, electronic equipment must not be treated as domestic waste, but must be disposed of professionally in accordance with Directive 2002/96/EC of the European Parliament and Council of 27th January 2003 concerning old electrical and electronic equipment. The disposal of this unit should follow all legal requirements and should not be disposed as unsorted municipal waste. The hazardous substances can leak into the ground water supply thus entering the food chain, endangering your health and the environment.
• There are several alternative solutions for disposal:

A) Your local municipality has established free collection systems for electronic waste.
B) Your local retailer upon purchase of a new product.
C) The manufacturer may accept the old appliance for disposal.
D) Old appliances sometimes contain valuable resources for scrap metal dealers.

STEPS BEFORE USE

Installation tips

1. Do not block or restrict the airflow around the unit. Make sure the air inlet exhaust grills are not obstructed. Allow 30cm of clearance around the unit.
   

2. Ensure the filter is clean.

3. Place unit in vertical operating position and allow 2 hours before initial use in order to avoid malfunctions.
   

4. Before the initial operation, please check, if the water level switch, located within the water bucket area, is in the right position.
   

PRODUCT FEATURES

Choosing the correct dehumidifier should be based on the following factors:

• The size of the room
• The room temperature
• The relative humidity
• Room insulation

Consumption values may vary depending on the relative humidity in the room of operation.
**30W Consumption during the fan operation.
The fan only operation is a function that cannot be manually selected. It is automatically selected when the moisture content in the room is lower than that set by the MODE button.
When Low Fan Speed is set, the consumption can reach a maximum of 330W, regardless of the mode (MODE) that has been selected.
When the Medium or High Fan Speed is set, the consumption may reach a maximum of 650W.
The deviation rate of the above values is +/- 5%.

*** Desiccant dehumidifiers, operate without the use of a compressor, which is considered cutting edge technology for greater efficiency at lower room temperatures. Including an absorbent Desiccant dehumidifying wheel, that reduces the room’s humidity during its rotation. An electrical resistance heats the Desiccant element discarding the collected humidity directly inside the water bucket.

GETTING TO KNOW YOUR DEHUMIDIFIER

CONTROL PANEL • FUNCTIONS

POWER
Press “Power” button to turn the dehumidifier on or off.

• After turning the dehumidifier OFF, the fan continues to operate for a small period of time, so as to protect the inner components. During this operation DO NOT unplug the device. Please wait for the fan to stop operating.
• In the event of a power failure the unit has an Auto Restart function. Once the power is restored after a power failure, the appliance will automatically restart to operate at the selected settings prior to the power failure.

FAN
While operating press the “FAN” button to select the fan speed. Low, Medium or High fan speeds are available. The corresponding led indicator will activate, confirming your selection.

• The use of LOW speed is recommended for lower noise levels or for areas with less condensation.
• The use of HIGH speed should be preferred to achieve faster dehumidification.

MODE
Press “MODE” button, and select among the following operations:
Turbo Mode (continuous dehumidification): The dehumidifier will operate continuously, extracting humidity from the air. When this function is selected, the dehumidifier will keep running continuously until the water tank is full, disregarding the relative humidity of the room.

 When TURBO mode is selected, the Fan High Speed automatically operates.

Alternative use of this function

• Drying your clothes: Position the dehumidifier in a small sized room along with your clothes horse. Keep doors shut, and your clothes will dry up in no time!
• For optimal results manual wringing of the clothes is suggested.
• Allow a 30-50cm distance between the unit and the clothes horse.
• For special humidity requirements, where big amount of water needs to be distracted such us flooded rooms.
• When immediate dehumidification is necessary such as for rooms that haven’t been used for an extended period of time etc.

Eco Mode -Humidity level 60% RH: The dehumidifier will stop operating after reaching the 60% humidity level, and will regain operation once this level has been exceeded.

Use this function for minimizing the operative time of the dehumidifier
and to achieve greater energy savings.

Normal Mode -Humidity level 50% RH: The dehumidifier will stop operating after reaching the 50% humidity level in the room and will start again when this level is exceeded.

Suggested mode for most domestic applications.

High Mode -Humidity level 40% RH: The dehumidifier will stop operating after reaching the 40% humidity level in the room and will start again when this level is exceeded.

To prevent the condensation on single insulated windows, or when outside temperatures drop below 5ºC the High Mode should be preferred rather than the Normal Mode.

SWING
The SWING function may be set between a 90 and a 45 degree angle by pressing the “SWING” button – the swing indication led is active. By pressing the button once again, the flap will stop at the desired angle and the swing led indication will then turn off.

Achieve the desired angle selection and enjoy ideal room conditions.

TIMER
Use the TIMER button to set unit OFF by 1/2/4/8 hours. The unit will switch off upon selecting the desired time-frame.

IONIZER
Press “IONIZER” button to switch on or off the ionizer. By activating the ionizer, negative ions are released to purify the air and remove unpleasant and unhealthy particles.

WATER FULL
Indicator “Full Water Tank” turns on following a beep alert when bucket is full, removed, or misplaced.

The water level control switch shuts off the dehumidifier when the bucket is full, removed or misplaced.

ALARM
If the unit malfunctions, an alarm system will activate and the unit will automatically shut down.
Internal Over Heating Protection: During operation, malfunctions may occur if the air intake or exhaust are obstructed or blocked by objects. This can cause high internal temperatures and the appliance will automatically shut down. Unplug the device immediately and resume operation after 5 minutes.
Tipping Protection: The unit has a heater inside, to avoid overheating, the unit is equipped with a tipping switch that automatically shuts down the device in the event the unit tips over.

WATER TANK & DRAIN HOSE

There are two ways to remove collected water. Before proceeding, ensure that you have switched off and unplugged the device.

Using the water bucket

When the water tank is full, the alarm will beep and the Water Full indicator light will turn on.

• Slowly remove the bucket. Grip the handle with caution, and carefully pull outwards so the water does not overflow. Do not place the tank on the floor because the bottom of the tank is uneven. Doing so the tank will fall and the water will be spilled on the floor.

• Empty the water from the tank and place it again in to the device. The water tank, must be securely and properly placed, for the dehumidifier to operate.

• When the water tank is re-installed the unit will automatically restart.

• When you remove the tank, do not touch any parts inside the unit, as you may damage the device.

• Be sure to gently place the tank into the dehumidifier.

• Do not drink or use the collected water from the device.

• Wipe any excess water on, or in, the unit when removing the tank.

Continuous draining

Water automatically can be emptied into a floor drain by attaching the unit with a water hose.

• Remove the water tank and attach the drain hose to a suitable drainage facility.
  Make sure the hose is attached securely to avoid any leaks and place it as deep as possible to ensure the right drainage.

• The dehumidifier should be placed on a flat surface in an upright position.

• Place the end of the hose into the drain and make sure that the water flows naturally. For correct drainage, make sure the hose stays below the level of the drain hose outlet.

**** When the continuous drainage feature is not being used, remove the drain hose from the drain hose outlet.

MAINTENANCE & CLEANING

Before performing any maintenance or cleaning of the dehumidifier, make sure that it is unplugged.

Cleaning the filter:

Use water and mild detergent to clean the dehumidifier.

• Do not use abrasive cleaning agents or solvents; use a brush or vacuum attachments for cleaning
• Do not use a dishwasher to clean the filter.
• Do not apply any water directly on or into the device while cleaning, as it may cause rust, insulation deterioration or electrical shock.
• Allow the filter to completely dry before re-installing.

NEVER USE THE DEVICE WITHOUT THE AIR FILTER

STORAGE

When unit is inactive for an extended period of time please make sure you follow the instructions below, for an appropriate storage of your appliance:

• Turn unit off allowing one day before storage.
• Remove the drain hose (if attached).
• Clean the removable parts of the device, water bucket and air filter.
• Cover the device.
• Store the dehumidifier. in upright position, in a dry, well ventilated area and avoid direct sunlight.

FREQUENTLY ASKED QUESTIONS & TROUBLE

Does the Zeolite need replacing?

No there is no need for replacement. The Zeolite is regenerated within the dehumidifier and this will last for many years.

Are dehumidifiers expensive to run?

For the first month upon its initial operation, the dehumidifier operates at its maximum in order to calibrate in its working environment. As time passes, this will gradually reduce, since the dehumidifier will be controlled via its humidistat. In regards to damp houses, the use of a dehumidifier may lower your central billing costs significantly.

Do desiccant dehumidifiers generate an unpleasant smell?

During the first days of usage and periodically afterwards you might notice a smell coming from the dehumidifier. This is caused by the Zeolite desiccant material and is not a sign that the dehumidifier is not working properly nor is it harmful to humans or pets.
The smell occurs because the Zeolite absorbs odors from items like cigarettes, cosmetics, hair sprays, building materials and new furniture, and as the desiccant is heated the smell is discharged into the room. You can clear it by running the dehumidifier in a separate space like a garage or – if it is dry – outside.

Where would it be better to place the dehumidifier?

For optimal results, it is suggested to place the dehumidifier in a central area, like a hallway. Leave the doors open and the moisture will migrate naturally towards the device to be processed.

Can we replace the filter with one of other type like HEPA filter etc.?

No, the filter can’t be replaced.

Which is the appropriate room humidity level?

The suggested humidity range fluctuates between 40% and 60%. This level of an average humidity ensures the greatest comfort for you and your family, preventing allergies or diseases, and keeps your home healthy and well maintained, in terms of plasterboards, dye exfoliation, wood furniture and any other equipment or material that is susceptible to the harmful consequences of extremely high humidity conditions.

Why there is still condensation from the windows, even by using the dehumidifier?

When the room reaches the preferred humidity level, there is a possibility of humidity appearance on windows. This happens due to the temperature difference of the room’s and external ambient temperature. Keep running the dehumidifier and when the air temperature outside increases the windows should clear of condensation.

The dehumidifier is not a heating device. What could be the cause of warm air being extracted?

The desiccant dehumidifier Rise, operates with an electrical resistance that warms up the desiccant material. As a result, the temperature of the outgoing air has been increased to 10°C comparing to the room’s temperature. This doesn’t denote in any case that this device can be used as a heating appliance.

The unit does not start

• Make sure the dehumidifier’s plug is placed completely into the socket.
• Check the house fuse/circuit breaker box.
• Check whether the power cord is damaged.
• Check the water bucket, if it is full, empty it.
• Check if the dehumidifier has reached its preset level.
• Make sure the water bucket is positioned properly.
• Room temperature is lower or higher than the advised operational range.
• Check whether the humidity level has been set in high levels

Dehumidifier does not dry the air as efficient

• Make sure that the dehumidifier has been operating enough time to remove the moisture.
• Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier.
• The humidity selector may not be set low enough.
• Make sure you have cleaned the filter as suggested. Clogged filter may result in reduced performance.
• All house exits (windows doors etc) where the dehumidifier is operating, should be shut.
• Room temperature is below the advised operational range.
• There is a kerosene heater or something giving off water vapor in the room.
• The room that the device is placed is bigger than suggested.
• The humidity level is too high.

The unit makes a loud noise when operating

• The air filter is clogged.
• The device is titled instead of being in an upright position.
• The floor surface is not flat.

During the use of the drain hose, you may find water inside the water tank

• Check that the drain hose has been correctly placed.
• The drain hose has been blocked or damaged.

All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and the specifications of the product for reasons, such as product improvement, are subject to change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further details. Any future updates to the manual will be uploaded to the service website, and it is advised to always check for the latest version.

Scan here to download the latest version of this manual.
www.inventorappliances.com/manuals

Activate your Warranty

Visit our web site and activate your warranty via the below link or by scanning the QR code
https://www.inventorappliances.com/warranty-card

Fill all the fields as shown below

 once the warranty submission has been completed a confirmation message will be sent to your email

References

• Biblioteca media - Inventor
• Bedienungsanleitungen - Inventor appliances
• Manuels de produits - Inventor appliances
• Registro de la tarjeta de garantía de 2 años - Inventor appliances
• 2 Jahre Garantie Registrierung - Inventor appliances
• Certificato di Garanzia di 2 anni - Inventor appliances
• Inventor Appliances User Manuals - Inventor appliances
• Carte de Garantie de 2 ans - Inventor appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>