Skull Co Core Pro Drive User Manual
- June 12, 2024
- Skull Co
Table of Contents
Skull Co Core Pro Drive
SPECIFICATIONS
ADJUSTING THE SPACE FOR A PROTECTIVE CASE
- Push the spacing-switch DOWN when docking your Switch WITH a protective case
- Push the spacing-switch UP when docking your Switch WITHOUT a protective case
HOW TO DOCK AND REMOVE YOUR SWITCH
- Press the top of the Jumpgate Dock
- The top cover will pop up
- Slide in your Switch into the Jumpgate Dock (you can dock your smart phone the same way)
- To remove your Switch use one hand to stabilize the Jumpgate Dock and the other hand to lift your Switch
REMOVING THE GUIDE PILLAR FOR A 3RD PARTY CASE
- Pull the guide pillar up when the top of the Jumpgate pops up (no need to remove it for GripCase)
- Once the guide pillar is removed you don’t have to remove the protective case before docking your Switch
USING THE KICKSTAND
- Turn the Jumpgate upside down
- Open the kickstand
DETACHING THE CORE DRIVE
- Put your thumb into the gap
- Take the Core Drive out in direction of arrow
UPDATING THE JUMPGATE/CORE DRIVE FIRMWARE
The Core Drive is ready for use out of the box. There is no need to update the firmware. A Core Drive firmware update will be available on our website if Nintendo bans our system.
- Download the APP on our website: www.skullnco.com SUPPORT – DOWNLOAD – FIRMWARE
- Install the APP on your computer.
- Open the APP and connect the Core Drive to your computer via a USB cable; USB-A or
- USB-C to the computer and USB-C to the Core Drive.
- Click the “Update” button, it will start updating the firmware.
- Disconnect the Core Drive after the updating completed.
If the Core Drive is disconnected before the update is successfully completed, simply re-connect the Core Drive to the computer and click “Update” again.
for Laptop
Features
- Provides 3 additional USB 3.0 ports
- Supports up to 4K@60Hz via HDMI
- Supports up to 100W power delivery
- Compatible with Thunderbolt3
- Compatible with Steam Deck
- Compatible with iPad Pro
for Smart Phone
Features:
- Dock your smart phone with protective case
- DeX/TV-out/HDMI MHL function (for smart phones supporting DeX/TV-out/HDMI MHL)
- Supports up to 4K@60Hz via HDMI
- Supports up to 60W power delivery
- Provides 3 additional USB 3.0 ports
- Can be used as a charging stand
for Nintendo Switch
Features
- Dock your SWITCH with protective case
- TV Mode
- TableTop Mode while charging (when HDMI is disconnected)
- Provides 3 additional USB 3.0 ports
- Two viewing angles for TableTop Mode
- Compatible with OLED and OG SWITCH
- The detachable Core Drive can be used as a portable dock
- Outputs TV Mode with a 5V phone charger
Read User Manual Online (PDF format)
Loading......