Skullcandy S7FEZ Fuelbase 2 Wireless Charging Pad User Guide
- June 9, 2024
- Skullcandy
Table of Contents
Skullcandy S7FEZ Fuelbase 2 Wireless Charging Pad
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS IMPORTANT
SAFETY INFORMATION
WARNING- When using this product, basic precautions should always be followed, including the folowing:
- Read all the instructions before using the product.
- Close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product
- Do not expose the wireless charging pad to rain or snow
- Do not use the wireless charging pad in excess of its output rating
- Do not use the wireless charging pad if it is damaged or modified
- Do not disassemble the charging pad
- Do not expose the wireless charging pad to fire or excessive temperature (above 100 C)
- Have servicing performed only by a qualified repair person with identical parts
- Unplug the wireless charging pad when not in use.
Plug-in To Power
Plug in to power the charging pad.
Charging Your Device
Place your device in the center to charge. Questions Visit: www.skullcandy.com
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will does not occur in a particular installation. F this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the folowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitter(s/receiver(s) that comply with
Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the folowing two conditions: (1 )This device may not
cause interference.(2)This device must accept any interference, including
interference that may cause undesired operation of the device.
ISED SAR Compliance Statement
This equipment complies with FCCIC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 15 cm(FCC) and 10cm (C RSS-102) between
the radiator and your body.
- Americas
- Skulcandy, Inc.
- 6301 N Landmark Dr.
- Park City, UT 84098, U.S.A.
- Skullcandy.com
Skullcandy. and other marks are registered trademarks of Skulkandy, Inc. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>