Skull Co B08CH3VP34 Portable Dock with Detachable USB Hub HDMI TV Adapter for Nintendo Switch User Guide

HOW TO POP UP THE DOCK

To pop up the dock, please press the area shown above

SPECIFICATIONS

ADJUSTING THE SPACE FOR A PROTECTIVE CASE

HOW TO DOCK AND REMOVE YOUR SWITCH

Slide in your Switch into the Jumpgate Dock (you can dock your smartphone the same way)
To remove your Switch use one hand to stabilize the Jumpgate Dock and the other hand to lift your Switch

REMOVING THE GUIDE PILLAR FOR A 3RD PARTY CASE

Pull the guide pillar up when the top of the Jumpgate pops up no need to remove it for GripCase)
Once the guide pillor is removed you don’t have to remove the protective case before docking your Switch

USING THE KICKSTAND

For Nintendo Switch

Key features:

• Dock your Switch with a protective case
• TV Mode with 15V power
• IV Mode with SV power
• Tabletop Mode while charging (when HDMI is disconnected)
• Two viewing angles for Tabletop Mode
• Two USB 3.0 ports function without AC adapter
• The detachable Core Drive can be used as a portable dock
• The Jumpgate can be used as a charging stand without the Core Drive

**** When you use an SV charger for Switch TV Mode, the Joy-cons may Hicks( due to different production batches. However, this will not harm the Switch or joy-cons. Just remove the Joy-cons If the flickering bothers you

For SmartPhone

Key features:

• Dock your smartphone with a protective case
• HDMI port for DeX/TV-Out (only works for the smartphones that have DeX/TV-Out function)
• Two USB 3.0 ports for mouse, keyboard, and Hash drive
• SD & microSD slots (cannot be used at the same time)
• The Core Drive functions without the Jumpgate dock
• The Core Drive can be used as an OTG adapter
• The Jumpgate can be used as a charging stand without the Core Drive for Laptop

For Laptop

Key features:

• HON output
• Two USB 3.0 ports
• SD & MicroSD slots (cannot be used at the same time)
• The MC port can deliver( up to 100W power
• The Core Drive functions without an AC adapter

DETACHING THE CORE DRIVE

UPDATING THE JUMPGATE/CORE DRIVE FIRMWARE

**** The Core Drive is ready for use out of the box. There is no need to update the firmware. A Core Drive firmware update will be available on our website if Nintendo bans our system.

• Download the APP on our website: www.skulInco.com
  SUPPORT → DOWNLOAD→FIRMWARE

• Install the APP on your computer.

• Open the APP and connect the Core Drive to your computer via a USB cable; USB-A or USB-C to the computer and USB-C to the Core Drive.

• Click the “Update” button, it will start updating the firmware.

• Disconnect the Core Drive after the updating is completed.

**** If the Core Drive is disconnected before the update is successfully completed, simply re-connect the Core Drive to the computer and click “Update” again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>