15 Odyssey Large Spinosaurus Toy Figure Realistic Instruction Manual
- June 21, 2024
- Spinosaurus
Table of Contents
15 Odyssey Large Spinosaurus Toy Figure Realistic
Product Information
- Specifications:
- Product Name: SPINOSAURUS
- Manufacturer: Odyssey Toys
- Country of Origin: China
- Power Source: 4×1.5V AAA batteries for Spinosaurus, 2×1.5V AA batteries for the remote (batteries not included)
- Remote Control Type: Infra-Red
Product Usage Instructions
- Spinosaurus:
- Locate the battery compartment on the base of your Spinosaurus.
- Using a phillips screwdriver, remove the screw securing the cover and open it.
- Install 4xAAA batteries into the battery holder taking care to match the correct polarity (+/-).
- Replace the battery holder, install the cover, and replace the screw.
- Remote:
- Locate the battery compartment on the back of the remote.
- Using a phillips screwdriver, remove the screw securing the cover and open it.
- Install 2xAA batteries taking care to match the correct polarity (+/-).
- Replace the cover and install the screw.
- Using Your Remote:
- The remote control allows you to control the Spinosaurus with the following functions:
- Forward movement
- Backward movement with turning capability
- Tip: Ensure you are pointing the remote directly towards the Spinosaurus for reliable control.
FAQs
- Q: What should I do if my product is not functioning correctly?
- A: If you experience any issues with your Spinosaurus, please contact our Customer Service team at Care@OdysseyToys.com or call 1-(305)-933-4480 during our operating hours (10:00 am – 5:00 pm EST). Please do not attempt to repair the product yourself as it may void your warranty.
- Q: What is covered under the warranty?
- A: The warranty covers manufacturing defects and faults in materials. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please refer to the warranty terms for more details.
Features
Cautions and Information
CAUTIONS AND WARNINGS
- Suitable for ages 6 and up. Adult supervision is always recommended.
- This product contains small parts which are a choking hazard. Keep away from small children.
- Manufacturers and dealers disclaim all responsibility for damage caused by misuse.
- Keep hair and loose clothing away when powered on.
- If the product will be stored and unused for an extended period, please remove the batteries.
- Check the batteries regularly for potential leakage or corrosion that may occur.
- When installing the batteries carefully follow the polarity marking +/-.
- Do not mix different battery types.
- Remove exhausted or drained batteries.
CARE AND MAINTENANCE
- Do not submerge the unit in any liquids.
- Keep the unit dry.
- Do not place the unit near powerful, un-shielded magnets.
- Do not expose the unit to extreme hot or cold temperatures.
- Do not hit, drop, or smash the unit with extreme force.
- Do not disassemble the unit for any reason.
NOT FOLLOWING THESE PRECAUTIONS WILL VOID YOUR WARRANTY.
FCC STATEMENT:
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- this device must accept any interference receiver, including interference that may cause undesirable operation.
- MANUFACTURED FOR ODYSSEY TOYS
- MADE IN CHINA
Batteries
INSTALLING THE SPINOSAURUS’ BATTERIES
- Locate the battery compartment on the base of your Spinosaurus.
- Using a phillips screwdriver, remove the screw securing the cover and open it.
- Install 4xAAA batteries into the battery holder taking care to match the correct polarity (+/-).
- Replace the battery holder, install the cover and replace the screw.
INSTALLING REMOTE BATTERIES
- Locate the battery compartment on the back of the remote.
- Using a phillips screwdriver, remove the screw securing the cover and open it.
- Install 2xAA batteries taking care to match the correct polarity (+/-).
- Replace the cover and install the screw.
USING YOUR REMOTE
- Tip: The Spinosaurus uses an Infra Red remote. Make sure you are pointing the remote towards the Spinosaurus for reliable control.
Please do not return this product to the store.
For Customer Service please email:
- Care@OdysseyToys.com.
- Please note the unit’s model number and name in your email: Model no. ODY-20SI Spinosaurus
- www.odysseytoys.com/support.
- 1-(305)-933-4480
- Hours of operation: 10:00 am – 5:00 pm EST
WARRANTY
60 DAY LIMITED WARRANTY
- Odyssey Marketing / Odyssey Toys warrants to the original purchaser, when used in North America only, that this product shall be free of defects in material and workmanship.
- This warranty applies within 60 days of the original purchase date with normal home use.
- This warranty does not apply to commercial use of this product. Use outside of North America is not covered by this warranty. During the warranty period, we will at our discretion, repair or replace this product without charge, as long as the product has not been abused or mishandled as by our determination. Our determination shall be final and be the consumer’s sole remedy.
- ALL RETURNS must be accompanied by a Return Authorization Number which is issued by Odyssey Marketing’s Customer Service Department.
- Please contact Customer Service BEFORE returning any products or parts thereof.
- Once you have obtained a Return Authorization Number, you will be provided a return address within the Customer Service email.
- This warranty does not cover installation, adjustments in the home, damage due to accidents, misuse, abuse, fire, or any acts of God, incorrect line voltage, damage to other equipment caused by improper installation, or unauthorized or improper modifications.
- This warranty gives you specific legal rights and you may also have other rights that vary from state to state.
- THIS WARRANTY IS EXPRESSLY INSTEAD OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.**
- ©2024 Odyssey Toys LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>