TIMEWAY TNS-0118 Wireless BT Gamepad For Nintendo Switch User Manual
- June 5, 2024
- TIMEWAY
Table of Contents
- TIMEWAY TNS-0118 Wireless BT Gamepad For Nintendo Switch
- Production Introduction
- Product Diagram
- Product Features
- Function Chart:
- Mode and Pairing Connection Instructions
- Charging Indication and Charging Characteristics
- Automatic Sleep
- Low Battery Warming
- 3D Joystick Instruction
- Environment Conditions
- Matters Needing Attention
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TIMEWAY TNS-0118 Wireless BT Gamepad For Nintendo Switch
Production Introduction
It supports the connection between the USB cable and the N-S console and PC platform. There are burst setting function key-Turbo function key, screenshot key, gyroscope gravity sensing, asymmetric dual-mo-tor vibration, console waken up by controller and other functions.
Product Diagram
Product Features
-
It supports Bluetooth wireless connection with
N- S console platform. -
It supports a wired connection of USB cable with
N- S console and PC computer. -
It is designed with a Turbo setting function, variable Turbo rate, screenshot key, gyroscope gravity induction, and other functions.
-
It is provided with asymmetrical double motor vibration to adjust the motor vibration speed.
-
It supports the console wake-up function and the code key connection.
-
Charging lamp.
Function Chart:
Function Name | Available or not | Remarks |
---|---|---|
USB wired connection | Yes | |
Bluetooth connection | Support | |
Connection mode | Switch PC mode | |
Console wake-up function | Support | |
Six-axis gravity sensing | Yes | |
A key | Yes | |
B key | Yes | |
X key | Yes | |
Y key | Yes | |
– key | Yes | |
+ key | Yes | |
L key | Yes | |
R key | Yes | |
ZL key | Yes | |
ZR key | Yes | |
Home key | Yes | |
cross key | Yes | |
TUBRO key | Yes | |
Screenshot key | Yes | |
3D joystick (left 3D joystick function) | Yes | |
L3 key (left 3D joystick press function) | Yes | |
R3 key (right 3D joystick press function) | Yes | |
Connection lamp | Yes | |
Motor vibration function | Yes | |
NFC reading function | Not support | |
Controller upgrade | Support |
Mode and Pairing Connection Instructions
- Switch Wired Connection Mode:
- Before using the wired connection, please confirm that the system of the N-S console: ‘Settings’ -> ‘Controller and Sensor’ -> ‘Wired Connection of Pro Controller’ is on.
- The controller is connected to the N-S base through the USB cable, so as to be used as a wired controller, with corresponding lamps of the controller long-on.
- Unplug the USB cable to turn the controller to wireless mode and automatically connect back to the console!
- Switch Wireless Connection Mode:
- Before using the wireless connection, please confirm that the N-S console system enters into: “controller” -> “change grip mode/order” in the pairing state;
- Long press the code matching key for about 3 seconds to enter the Bluetooth search mode. The LED indicator flashes by the “1-4-1” horse race. After the connection is successful, the corresponding channel indicator light is always on. the controller. After being awakened, it will automatically connect to the previously paired console and go to auto sleep if it fails to connect within 8 seconds.
- When the console and controller are sleeping, press the HOME of the controller to wake up the console and controller.
Charging Indication and Charging Characteristics
When the controller is charging: the charging LED lamp lights up, and the LED light turns off when it is fully charged.
Automatic Sleep
-
Mode of connecting the N-S:
Turn off or power off the screen of the N-S console to make the controller automatically disconnect and sleep. -
Bluetooth connection mode:
The Bluetooth is disconnected and enters sleep mode after the Bluetooth code key is pressed shortly. -
If any key of the controller is not pressed within 5 minutes, it will automatically go to sleep (including the gravity sensor does not move).
Low Battery Warming
Low battery warning: The LED lamp of the current connection channel flashes
quickly.
Remarks: When the console indicates low power, the LED lamp of the controller
will flash a few times quickly instead of continuous flashing.
Turbo Function (continuous firing and fast play setting):
-
Press and hold any key of A, B, X, Y, L1, L2, R1, R2, and then press the Turbo key to enter the Turbo (burst) function.
-
Press and hold any key of A, B, X, Y, L1, L2, R1, or R2 again, and then press the Turbo key to clear the Turbo (burst) function.
-
No LED indication for Turbo Function.
-
Turbo Speed Adjustment:
Press the hold the Turbo key and up the right 3d, the Turbo speed change: 5Hz->12Hz->20Hz. Press and hold the Turbo key and down the right 3d, the Turbo speed change:
20Hz->12Hz->5Hz. Note: The default turbo speed is 20Hz after power-on. -
Adjustment of Vibration Intensity:
Press and hold the Turbo key, and up the left 3d, the vibration intensity change:
0%->30%->70%->100%.
Press and hold the Turbo key, down the left 3d, the vibration intensity change:
100%->70%->30%->0.
Remark: The default vibration intensity is 100%after power-on.
photograph (Screenshot) Function
- Switch mode: After the camera key is pressed, the screen of the Switch console will be saved as a picture.
- There is no screen capture function in PC mode.
USB Connection Function
- Support wired N-S and PC XINPUT mode connection.
- Automatically recognize the N-S mode after the N-S console is connected.
- Achieve XINPUT mode when connected to the PC.
electric Parameters
- Input voltage: DC 5.0V
- Input current: 1.5A
3D Joystick Instruction
- The 3D joystick of this product does not support the manual calibration function on the N-S console.
- Each time this product is plugged into the Switch console, it will automatically calibrate the 3D joystick.
- If the 3D joystick drifts during the use of this product, please re-plug the controller before using it.
Don’t touch the 3D joystick when plugging and unplugging the controller.
Environment Conditions
Item | Technical indicators | Unit | Remarks |
---|---|---|---|
Working temperature | -10~40 | °C | |
Storage temperature | -20~70 | °C | |
Relative temperature | |||
Heat-dissipating method | Natural air cooling |
Matters Needing Attention
- This product should be well kept when not in use.
- This product cannot be used and stored in a humid environment.
- This product shall be used or stored by avoiding specks of dust and heavy loads to guarantee its service life.
- Please do not use the product which is soaked, crashed or broken and with electrical performance problems caused by improper use.
- Do not use external heating equipment such as microwave ovens for drying.
- If it is damaged, please send it to the maintenance department for disposal. Do not disassemble it by yourself.
- Children users shall use this product properly under the guidance of parents, and do not be addicted to the game.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>