lumio Teno Bowl Shaped Speaker User Guide
- June 5, 2024
- Lumio
Table of Contents
teno
**start guide
**
Technical specifications
Dimensions
Weight
Shell material
Inner body material
Bluetooth
Speaker configuration
Amplifier
Frequency range
True Stereo Pairing (TWS)
Microphone
Power
Battery type
Battery capacity
Speaker battery life
Light battery life
Charging
Charge time
Battery indicator
Light source/brightness
Light temperature
Brightness levels
Recommended room size| 5 ” (13cm) diameter x 2 ¾” (7cm) height
Approx. 1.6 lbs (725 g)
Cast resin and natural sand
High-grade acoustics fabric
Version 5.0
1 x 45mm full-range driver and 1 passive radiator
20W Class-D amplifier
60-20,000 Hz
Available between two Teno
Noise-canceling microphone for great clarity
5W (0.1W for standby)
Rechargeable lithium-ion
4000 mAh
Up to 8 hours at 50% volume
Up to 4 hours at 100% brightness
5V/2A via USB-C charger (included)
5.5 hours
White (while charging)/Green (fully charged)
High-output LED/250 lumen
2700k (soft warm white)
25/50/75/100%
5-20 m²; 50-200 ft², small social gatherings, in the office and mid-sized
rooms around the home
---|---
For further product information and warranty, visit hellolumio.com/pages/my- teno, or contact us at info@hellolumio.com. teno start guide
Instructions
Your Teno is controlled via touch. Separate the two halves slightly to turn on the light. Fully separate to turn on the speaker. Teno’s Bluetooth connection is automatically discoverable from your device when you fully open Teno and hear the chime sound.
Tips
Sound indicators
Chime
Bird chirping
Wings fluttering
Water drops| Speaker on/off
Bluetooth/TWS connected to device
Bluetooth disconnected
Low battery
---|---
Light
Tap the center top surface to activate the dimmer. There are four levels of
brightness to choose from.
Volume
Slide two fingers up and down along the curve at the center of the bowl to
adjust volume.
Speaker
Tap the center top surface closer to the edge to receive or end a call.
Reset
Closing and re-opening Teno will resolve most issues. If that doesn’t work,
hard re-set the system by pressing the reset button.
Bluetooth disconnect
If you don’t see “Teno” on your phone, ensure that Teno is not connected to
another device. Disconnect first. If connection problems continue, try closing
and re-opening Teno.
Maintenance and care
For fabric, wipe dust off the surfaces using a dry, soft cloth. Do not use
liquid or aerosol cleaners. To remove stains or dirt, we recommend using
melamine sponge cleaner (also known as magic eraser) or a soft, damp cloth and
a solution of water and mild detergent, such as washing-up liquid. For the
outer shell, gently wipe the shell using a soft, dry cloth. Use a brush with
soft bristles for dust removal in grooves or crack areas. Do not spray water
or cleaner directly onto the surface.
Scan me
Point your camera at this QR code for a Teno instructional video.