Quictent 20′ x 10′ x 7′ Large Greenhouse User Manual
- June 9, 2024
- Quictent
Table of Contents
- Garden Beds from Quictent
- About Quictent
- Parts List
- J| 
- Download This Manual (PDF format)
Quictent 20′ x 10′ x 7′ Large Greenhouse User Manual
IMPORTANT
We’d love to hear from our customers. If you have any questions about the manual or would like us to help in any way, please feel free to contact the support team. We will reply in 12 hours (business days).
Check the Spam and your email Settings if you do not receive a reply in time as it is probably blocked because our support team will always get back to you no later than the timeframe.
Garden Beds from Quictent
-
49″ x 37.4″ x 36″ GB-01
-
49″ x 37.4″ x 36″ GB-02
-
72.8″ x 37.4″ x 36″ GB-51
-
72.8″ x 37.4″ x 36″ GB-51G
-
35.4″ x 23.6″ x 35.4″ WGB-01
-
48″ x 48″ x 11″ WGB-02
This user manual applies to Quictent galvanized elevated raised garden beds. It will help you to get to know your Quictent galvanized elevated raised garden beds. Please read the guidelines in this manual and keep the manual for future reference. Our Mission To keep innovating and provide a wide range of reliable shelters and shades at consumer-grade prices with customer-first service. We may update the manual without notice in advance. You can always search “Quictent Instructions” online for the latest version.
About Quictent
Founded in the early 21st century, Quictent has grown into a popular brand with reliable products and excellent customer service during the past decades. We started with pop up canopies, and then expanded to other more categories of shelters and the like including raised garden beds, greenhouses, grow tents, carports, party tents, shade sails, patio umbrellas and RV covers . Driven by the vision to create unique spaces to meet every specific need and become a part of America’s landscape, we at Quictent would spare no effort to keep innovating.
Our Vision
To create unique spaces to meet every specific need, and become a part of America’s landscape.
Our Mission
To keep innovating and provide a wide range of reliable shelters and shades at consumer-grade prices with customer-first service.
Our Service
The customer-centric service is what we at Quictent take great pride in. In addition to the hassle-free warranty covering all Quictent products, an industrial leading support team is standing behind at all times. Whenever you need help or have any suggestions and comments, do not hesitate to reach out to us. You’re sure to get a to-the-point reply in 12 hours.
Parts List
You’ll receive one (1) box for this model. Please pay particular attention to
making sure all parts are numbered and graphically indexed as shown on the
Parts List, so does the quantity for each part. If you need any help, please
email the support team with the order number, required parts (name, quantity,
and part number for each), and photos (or videos, if applicable), we will get
back and help out soon.
| Part Number | Diagram | Description | Quantity |
|---|---|---|---|
| #A |  | Long Metal Sheet | 2 | |
| #B | Short Metal Sheet (Regular) | 1 | |
| #C |  | Short Metal Sheet with Holes | ||
| (To Attach the Hook) | 1 | ||
| #D |  | Leg Post (Regular) | 2 | |
| #E |  | Leg Post with Holes (Where the | ||
| Wheel Should be Attached) | 2 | ||
| #F | Handle Fitting | 2 | |
| #G |  | Handle | 1 | |
| #H |  | Short Pole for Metal Shelf | 2 | |
| #I |  | Long Side Pole for Metal Shelf |
2
J| | Long Middle Pole for Metal Shelf| 1
K| | Bottom Metal Shelf| 1
L| | Axle| 1
M| | Wheel| 2
N| | Metal Sheet with Drain| 1
O| | Hook| 2
P| | Screw Pack ( Parts Included are 48 x Bolt, 48 x Nut, 1 x Small Wrench, and 1 x Allen Key)| 1
Assembly
Reminders!
- Before the assembly, please check to make sure that you have all the parts listed in the Parts List.
- For better protection of the coatings, please do NOT assemble on hard surfaces. In this situation, grass or somewhere covered by a soft mat is recommended.
- You can finish assembling the garden beds without applying additional tools. However, for a quicker and more energy-saving process, you can use an electric drill (not provided).
- For your safety, we recommend you wear gloves (not provided) during the assembly
Step 1: As shown, layout the 2 x Long Metal Sheets (#A), 1 x Short Metal Sheet (1 x #B or 1 x #C), and 2 x Leg Posts (#E), then connect them with bolts and nuts at each corner joint.
Reminders!
- Please do NOT tighten the bolts with nuts in this step.
- Please note that extended parts of all the metal sheets, long or short, should face upwards.
Step 2: Connect the other Short Metal Sheet (#C if you used the part #B
in the previous step, and vice versa) with the Long Metal Sheets (#A), add the
2 x Leg Posts (#D) and the 2 x Handle Fittings (#F) to the two corner joints,
and then connect with bolts and nuts at each corner
Step 3: Connect the Handle (#G) to the ends of the Handle Fittings (#F)
with bolts.
Step 4: Assemble the framework of the bottom metal shelf with the parts (#H, #I & #J).
a) Attach the 2 x poles (#H, Short Pole for Metal Shelf) to the Leg Posts (#D
& #E).
b) Place the 2 x poles (#I, Long Side Pole for Metal Shelf) on the edge.
c) Place the 1 x pole (#J, Long Middle Pole for Metal Shelf) in the
middle of the Short Pole (#H).
Step 5: Assemble the wheels.
a) Insert the ends of the Axle (#L) into the pre-drilled holes on the Leg
Posts (#E).
b) Add the 2 x Wheels (#M) to the ends of the Axle (#L).
c) Tighten the axle and the wheels together with nuts.
Step 6 Assemble the Bottom Metal Shelf (#K).
a) Tighten all the bolts with nuts and turn over the assembled structure.
b) Place the Bottom Metal Shelf (#K) upside down on the poles for the
metal shelf.
Step 7: Place the Metal Sheet with Drain (#N) on the extended parts of
themetal sheets (#A, #B & #C), slightly arch the metal sheet for an easier
fit, then tighten them with bolts and nuts.
Step 8: Attach the 2 x Hooks (#O) to the Short Metal Sheet (#C) with
bolts and nuts.
Warranty
The 24-month limited warranty covering the materials and the craftsmanship under normal use and service conditions takes effect from the purchase date (on the invoice). Please note that the order purchase proof (order number or shipping information on the shipping carton) is the only valid evidence to claim for warranty.
REMINDERS
- In the event that you failed to access your order information online, we stronglyadvise you to keep the original packaging and shipping carton(s) because they are treated as a proof of purchase.
- To get what you need as soon as possible, we strongly suggest you provide all of the following information at your first inquiry:
- Order number
- Required parts (name, quantity, and part number for each)
- Pictures (or video clips, if applicable)
WARNING
- Restructuring the product without written permission from Quictent in advance would VOID the warranty.
- Damages due to improper use in severe weather conditions, including but not limited to high winds, heavy rain, sleet, snow, etc., will NOT be covered by the warranty.
