Yunji BP2000-PRO Portable Power Station User Manual

May 15, 2024
Yunji

Yunji BP2000-PRO Portable Power Station

Product Specifications

  • Model: BP2000 PRO
  • Total Input Power : 200-240V~50Hz/60Hz 15A
  • Total Output Power: 1 800W Quick Charge, 600W Slow Charge
  • Charging Modes: Slow Charging Mode, Fast Charging Mode
  • Protection Features : High-Temperature Protection, Overload Protection, Low-Temperature Protection
  • Output Ports: Aerial Socket (24V), USB Output, Cigarette Lighter (12V), PD Output, DC (12V), AC Output
  • Additional Features: UPS Mode, Silent Mode, Frequency  Switching, Car Charger/Adapter Charging Mode, PV Charging Mode, Constant Power Mode

Product Usage Instructions

Charging Method

  1. Ensure the device is powered off before plugging or unplugging the battery pack connectors.
  2. Connect the main unit to the BATTERY EXPANSION PORT and insert the battery pack into BATTERY EXPANSION PORT1. For a second battery pack, insert it into BATTERY EXPANSION PORT2 while the first one is in PORT1.

Using Time/Charging Time

  • Refer to the user manual for specific details on using time and charging time.

High Temperature Protection

  • The product is equipped with high-temperature protection to ensure safe operation even at elevated temperatures.

FAQ

Yunji BP2000-PRO Portable Power Station

  • Q: Can I charge the product using an extension cord?
  • A : It is recommended to charge the product directly from wall sockets to avoid any potential safety hazards. Avoid using extension cords or cable taps.
  • Q : What happens if I use multiple sockets for charging?
  • A: When using multiple sockets for charging, avoid connecting any other products to the same socket to prevent overloading.

DISCLAIMERS

Before using the product, please read the user manual carefully to ensure that you fully understand it before use. After reading, please keep the user’s manual in a safe place for future reference. If you use this product incorrectly, you may cause serious injury to yourself or others, as well as product damage and property damage. Once you use this product, you can be deemed to have understood, recognized and accepted all the terms of this manual. Users undertake responsibility for their own actions and all the consequences that may arise therefrom. The Company does not assume any responsibility for any loss caused by users’ failure to use the product in accordance with the User Guide. In order to comply with laws and regulations, The Company has the final interpretation of this document and all related documents of this product.

WHAT’S IN THE BOX

Yunji-BP2000-PRO-Portable-Power-Station-fig-1

Additional Purchase Accessories

  • Smart Expansion Battery (sold separately) Extra 2048Wh capacity, up to 7 B2000 PRO canbeconnectedto BP2000 PRO
  • Cmor Cynancion Dotton, Coblal

IMPORTANT SAFETY INSTRUCTIONS

Attention
Not permitted on aircraft.
WARNING – When using this product, basic precautions should always be followed, including the following:

  • Read all the instructions before using the product.
  • To reduce the risk of injury, close supervision is necessary when the product is used near children.
  • Do not put your fingers or hands into the product.
  • Do not expose the product to rain or snow.
  • Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury.
  • To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
  • Do not use the product in excess of its output rating.
  • Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
  • Do not operate the product with a damaged cord, plug, or output cable.
  • Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock
  • Do not expose the product to fire or high temperatures.
  • To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
  • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
  • When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
  • When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
  •  Do not clean the product with harmful chemicals or detergents
  • Misuse, dropping, or excessive force may cause product damage.
  • When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
  • Do not use or store the power station in direct sunlight for a long period, such as in a car, cargo bed, or any other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate, or generate heat. CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
  • Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.
  • Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of flammable liquid or gas.
  • A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas

SPECIFICATIONS

Yunji-BP2000-PRO-Portable-Power-Station -FIG-17

OVERVIEW

It is a portable power station, perfect for home emergency power backup and off-grid living.

  • It has built-in LiFePO4 batteries, which support AC charging, car charging, and solar panel charging. (It also has a UPS function, which ensures continuous power, get non-stop power with a switchover time of less than 10ms.)
  • Applications
    • Outdoor: Car electronics: car refrigerator, car air pump, car vacuum cleaner. etc.; DIV power tools: blowers, lawnmowers, drills, electric saws; camping equipment: cameras, Drones, electric barbecue grills, LED lights, electric air mats.
    • Indoors: Washing machines, TVs, radios, electric blankets, refrigerators, kitchen appliances (cooking appliances), microwave ovens, cooking heaters, coffee makers, rice cookers, laptop computers, mobile phones, lighting equipment.etc

Yunji-BP2000-PRO-Portable-Power-Station-fig-2

1. Main Power Switch 10. Type-CPD 100W
2. DC Switch 11. 20A AC Outlet
3. USB Switch 12. 30A AC Outlet
4. AC Switch 13. Overload Protection Button
5. 12V/10ACigarette Lighter Socket

14. AC Input

6. 24V/10AGX16  4 Pin

Aviation Port

| 15. AC Quick/Slow Charge Switch
7. 12V/3A 5521 DC Output| 16. Solar/Car Input
8. 5V-2.4A USB-A 12W| 17. Battery Expansion Port
9.QC3.018W| 18. Cooling Air lnleUOutlet

Main Power Switch

Press the power button for 3S to switch it on, and press it again for 3S to turn it off.
Note:
Short press the switch will turn on/off the LCD display. If there is no operation for 30 minutes, the LCD will be turned off and the power will be switched off automatically

DC Switch

  1. Press and hold the main power switch for 3 seconds to turn on the power station. Short press the DC button to switch the DC output ports on. Short-press it again to switch the DC output ports off.
  2. Check the remaining battery power. If the remaining battery level is less than 10%, please recharge the battery.
  3. Connect the device to the DC cigarette lighter socket, DC output port, and the output side of the aviation socket.
    Note: When the DC output port is not in use, please turn off the DC output switch to save power.

USB Switch

  1. Press and hold the main power switch for 3 seconds to turn on the power station. Short press the USB button to switch the USB output ports on. Short-press it again to switch the USB output ports off.
  2. Check the remaining battery power. If the remaining battery level is less than 10%, please recharge the battery.
  3. Connect a USB device to the USB output port.

Note:

  • Quick charging (QC3.0, PD) may not be possible depending on the USB device being charged and the cable used for charging.
  •  When not in use, please turn off the USB output switch to save power.
  • Long press the USB switch to turn off the button sound.

*AC Switch (AC outlet5. total output: S2200W}**

  1. Press and hold the main power switch for 3 seconds to turn on the power station. Short press the AC button to switch the AC output ports on. Short-press it again to switch the AC output ports off.
  2. Check the remaining battery power. If the remaining battery level is less than 10%, please recharge the battery.
  3. Please check the operating voltage of the device to be connected.
  4. Make sure that the power consumption of the connected device is less than the rated power (2200W) of this unit.
  5. By pressing and holding the AC switch for 3 seconds or longer, you can switch between E-Multiply mode and constant voltage mode.
  6. E-Multiply Mode: When the load is over the rated 2200W but less than 3200W, it will reduce the working voltage of the load to operate the equipment with output up to 3200W.
  7. Constant voltage mode: Allows the device to operate at standard voltage. If the load exceeds the 2200W rating, the overload protection will cut off the output

Note

  • When not in use, please turn off the AC output switch to save power.
  • The maximum AC output of the device that can be used is 2200W (Surge 4000W). Even if the total is less than 2200W, it may not be usable because the surge power is too high depending on the electrical equipment used.
  • For the 5 AC outlets, there are 1 for 30A and 4 for 20A

12V/10A Cigarette Lighter Socket
With the DC output switch on, the maximum output is 120W.
24V/10A GX16 4 Pin Aviation Socket
With the DC output switch on, the maximum output is 240W.
12V/3A 5521 DC Output
With the DC output switch on, the total maximum output is 36W.
5V=2.4A USB-A output
With the USB output switch on, the maximum output is 12W.

QC3.0 USB-A output
With the USB output switch on, the total maximum output is 21 BW=36W.
PD1 OOW USB-C output
With the USB output switch on, the total maximum output is 2
1 00W=200W.
20A AC output
With the AC output switch on, the maximum output is 2200W.
30A AC output
With the AC output switch on, the maximum output is 2200W.
Overload Protection Button

In case of an unstable power voltage supply due to lightning or other reasons, or if there is a large voltage input at the AC terminal, the overload protection function (safety circuit breaker) will be activated to protect this product and disconnect the AC input port from external devices. Please restore the AC input function of this product in the following steps.

  1. Turn off the main power button and unplug all ports devices.
  2. After confirming that there is no abnormality in each part, turn on the main power button.
  3.  Press the overload protection button and connect the AC charge cable to resume AC input.

AC Input
Recharge your power station by connecting it to a wall outlet or generator with the AC charge cable which is included in the package. AC recharging (Quick 1 B00W Max /Slow 600W Max) Please ensure that the AC voltage of the device are consistent with the utility power before using the AC port for charging.

AC Quick/ Slow Charge Switch
The charging power can be adjusted through the AC charge speed switch. Toggle this switch to the corresponding mode: Quick charge or slow charge mode

Yunji-BP2000-PRO-Portable-Power-Station-fig-3

Attention!
Slow charge: 600W Max Input Quick charge: 1800W Max Input When switching to the AC Quick charge mode, you need to ensure that the output voltage of the power supply device meets 100-120V and the output current is greater than 15A.

  1. The corresponding charging power is 1800W when the output voltage of power supply equipment is 120V and the output current is greater than 15A.
  2. It is not recommended to use the voltage range beyond 100- 120V to charge the product, because it may cause damage to the power station, which is not covered by the warranty.

Solar/ Car Input
Recharge this power station with a maximum solar input of 1 000W with a solar charging cable

  1. The maximum input voltage is 120V.
  2. lfthe input port is charged with a voltage higher than 120V, the power station will be damaged. Which is not covered by the warranty

Battery Expansion Port Smart
A port for connecting to the Expansion BatteryB2000

Cooling Air Inlet/ Outlet
The cooling fan will run automatically when the product reaches a certain temperature during use. Please avoid blocking the cooling air inleUoutlet and do not place objects within 11.8 inches {30cm) of the cooling air inleUoutlet during the use of the product. The fan has three gears, which are triggered according to the internal temperature. It will automatically run at low speed when the internal temperature reaches 113 °F{45°C) or higher. It spins at medium speed when the internal temperature reaches 131 °F {55°C) or higher. It spins at high speed when the internal temperature reaches 149 °F {65°C) or higher

LCD DISPLAY

Yunji-BP2000-PRO-Portable-Power-Station-fig-4

Yunji-BP2000-PRO-Portable-Power-Station -FIG-18

  1. When the LCD screen shows x 1, it means the BP2000 PRO + B2000connects correctly, it can expand up to 7 B2000batteries and shows x?;
  2. When the BP2000 PRO + B2000 is continuously connected or plugs the wrong expansion ports, BP2000 PRO will warn and the x1 icon will blink.

Note:
When connecting the BP2000 pRowith B2000, if the remaining power is less than 5%, they cannot be paralleled (because the battery voltage gap is large). However when you connect the input power source, you can activate it successfully and recharge the BP2000 PRO and B2000 Normally, after the P2000 PRoand 2000 pRoare is connected, the high battery device will automatically charge the low battery. However, if one of the devices is below 5%, the system will determine that the voltage gap is too large and cannot be connected successfully. At this time, when you connect the input power source, you can activate successfully and recharge the P2000 PROand B2000

How to expand theB2000expansion battery packs (E-Combine)

  • P2000 pRo can connect up to 7 B2000 expansion battery packs at the same time, which can expand the capacity up to 16384Wh.
  • For the specific connection method, please refer to the instruction manual of the B2000 battery pack.

Connection Notes

  1. Before connecting the B2000 expansion battery, please make sure that the power of both BP2000 and B2000 is turned off.
  2. After connecting the B2000 expansion battery, please make sure that both the BP2000 and B2000 screens display the parallel power icon before using it.
  3. Before connecting/disconnecting the B2000 expansion battery, please turn off the B2000 first.
  4. Do not touch the metal terminal of the wire with your hands. Wipe it with a dry cloth.
  5. Please ensure that the parallel wires are tightly connected to the parallel ports of the BP2000 power station and the B2000 expansion battery. Improper connections may cause heat at the connection terminals, affecting the use of the device and possibly causing a fire.
  6. If you need to charge the BP2000 +B2000, please connect the BP2000 PRo to the wall outlet/ solar panel to charge. If the B2000 expansion battery is separately connected to the AC adapter/solar/car charger, please disconnect the B2000 before connecting to the BP2000.

BP2000 PRO + B2000 Expansion battery pack
In this case, the input and output of the B2000 expansion battery will be stopped, only for capacity expansion.

  1. Input: The B2000 expansion battery will not be charged even if it is connected to the AC adapter or solar/car charging board.
  2. Output: 12V/48V/USB output port on the B2000 expansion battery is also unavailable.

UNINTERRUPTIBLE POWER SUPPLY (UPS)

To use the UPS feature, connect your power station to a wall outlet with the AC charge cable, then press the AC Switch and connect your devices via the AC output ports

Yunji-BP2000-PRO-Portable-Power-Station-fig-8

  1. Once you turn on the electrical device, it makes use of grid AC power directly.
  2. When the utility power is cut off, it will automatically switch to the product’s internal battery power within 1 Oms.
    Under UPS mode, the maximum AC output power is less than 1400W. If the AC output exceeds 1400W, the UPS icon will blink, which indicates an overcharge and the AC icon will be tum off, the output is interrupted

SOLAR PANEL RECHARGING

With a maximum solar input of 1000W. ( Maximum input voltage 120V)

  • Solar panel charging power will be affected by the weather, climate and other conditions.
  • Solar panel voltage over 120V will damage the power station. Which is not covered by the warranty.

Yunji-BP2000-PRO-Portable-Power-Station-fig-9

CAR RECHARGING

Recharge this power station by connecting it to a car’s output port with the car charge cable.

  • (Car recharging should be done after the car engine is started. Failure to start the car engine may cause the car’s battery to run out of power.
  • Car recharging is usually low power of 90-240W, so the charging time is long ( 12V/8A or 24V/ 1 OA). If quick charge is required, wall outlet recharging is recommended

Yunji-BP2000-PRO-Portable-Power-Station-fig-10

MULTICHARGE RECHARGING

It supports fast dual charging with AC recharging and Solar panel recharging at the same time. The max power is 1500W+1000W=2500W.

Yunji-BP2000-PRO-Portable-Power-Station-fig-11

ESTIMATED USAGE TIME

2048Wh x DOD x ‘l + {load W) = estimated usage time {unit: h)
Note

DOD is the depth of discharge of the battery, ‘l is the conversion rate of the inverter. DOD = 90%, 11 = 90%, load W = power consumption (wattage) of your device. For reference, assuming the power consumption of your device is 1000W, the working time will be 2048Wh0.90.9/1 000W=1.6hrs {rough calculated).

  • Please note that there is also an electrical loss due to self-discharge when the output port is turned on. The specific electrical loss is AC: 25W, DC24V: 3W, DC12V: 2W, USB: 0.5W.

TROUBLESHOOTING

FAQ

  1. The electrical appliance power is within the rated output power range of the product but it cannot be used.
    The battery of the power station is low and needs to be recharged. When some electrical appliances start, the peak power is higher than the product power, or the nominal power of the electrical appliance is greater than the electrical appliance power.

  2. Why is there a noise when using it?
    The noise comes from the fan or the relay when you start or use it.

  3. Is it normal the charging cable heat up during use?
    Yes, it is. The charge cable complies with national safety standards and has nassed the certification.

  4. What devices the product can support the AC output?
    The AC output is rated 2200W. It’s available to power most home appliances, whose rated power is lower than 2200W. Please make sure the total loading by AC is under 2200W before use

  5. How can we know the remaining discharge time?
    Please check the data on the LCD screen, it will show the remaining discharge time when you turn on.

  6. How can we confirm the product is charging?
    When the product is undercharging, the product screen will show the input wattage, and the power percentage indicator will blink.

  7. How should we clean the product?
    Please use a dry, soft, clean cloth or tissue to wipe the product.

  8. 8. How to store?
    Please turn off the product and place it in a dry environment. Do not place this product near water. For long-term storage, we recommend using the product every three months(Run out the remaining power first and recharge it to the percentage you want, such as 50%).

MAINTENANCE

  1. lt is recommended to use or store this product in an environment of 68 °F (20°C) to 36 °F (30°C), keep it away from water, heat, and other metal objects.
  2. For safety reasons, please do not store this product in an environment higher than 113 °F (45°C) or lower than 14 °F (- 10°C) for a long time.
  3. lf it is not used for a long time, please charge it to 60% before storing it. If the battery is left unused for a long time when the battery is seriously insufficient, it will cause irreversible damage to the battery and shorten the cycle life of the product.

WARRANTY

The product is with a 1-year warranty from the date of purchase ( damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God are not included). During the warranty period and upon verification of defects, this product will be replaced when returned with proof of purchase

CUSTOMER SUPPORT

If you need help regarding product issues, after-sales service, or other relevant problems, please contact us via email:[email protected] and provide the following information:

  • Order ID
  • Problem description

E-mail: [email protected]
Website: http://oukitel.com

FCC statement

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator and your body: Use only the supplied antenna.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Yunji User Manuals

Related Manuals