Gude GWS 700 ZR HM-2 Log Cutting Saw Instructions
- June 3, 2024
- Gude
Table of Contents
Translation of the original instructions
Log Cutting Saw
GWS 700 ZR HM-2
01729
Please read the instructions carefully before starting the machine
GWS 700 ZR HM-2 Log Cutting Saw
STARTING-UP THE MACHINE
DELIVERED ITEMS
- Feed cradle with safety cover
- Saw blade cover
- Extension de matière fissile
- Tension spring
- Transport protection
- Traveling wheels
STARTING-UP THE MACHINE
INSTRUCTIONS FOR CUTTING
|
---|---
|
SAWBLADE CHANGE
The self-lock nut must be replaced with a new nut not later than after loosening it two times.
|
---|---
V-BELT TENSION
|
---|---
CLEANING
TRANSPORT / STORAGE
|
---|---
Technical Data
| Log Cutting Saw | GWS 700 ZR HM-2 |
|---|---|
| Art. No | 1729 |
| Connection | PTO |
| PTO speed | 540 min-1 |
| Idle speed | 1420 min-1 |
| Sawblade x Bore diameter | 700 x 30 mm |
| Sawblade Thickness | 4,2 mm |
| Loading max. | 100 kg |
| Workpiece diameter | 80-240 mm |
| Workpiece length | 500-1500 mm |
| Weight | 164 kg |
Noise details
| Sound pressure level LpA | 102 dB (A) |
|---|---|
| Measured sound power level LWA | 111 dB(A) |
| Guaranteed sound power level LWA | 115 dB(A) |
- Measured according to EN ISO 3746: 2010, loaded, hazardousness K=4 dB (A)
The values stated are emission values and therefore do not necessarily represent safe workplace values. Although there is a correlation between emission and immission levels, it cannot be reliably deduced whether or not additional precautionary measures are necessary. Factors influencing the current immission level at the workplace include the nature of the work area, other noise sources, etc., e.g. the number of machines and other adjacent operations. Permissible workplace values may also vary from country to country. However, this information should enable the user to make a better assessment of the hazard and risk. Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education. In case of any doubts about connection and operation refer please to our customer center The operating personnel must be adequately trained in the use, adjustment, and operation of the device.
Specified Conditions Of Use
The circular saw firewood is used for cross-cutting of firewood. It is
necessary to follow all technical specifications and safety instructions.
Pieces of wood that are too short, too light, or too thin to get caught by the
barbs in the feed cradle must not be processed by the machine.
The machine may only be used if it is fully assembled. Operation of a machine
that is not fully assembled is strictly prohibited.
**** The machine may only be operated by one person.
Make sure there is nobody present in the dangerous area. The minimum distance
is 2 m.
Residual risks Risks!
Note: There may still be some residual risks when operating the machine,
even if all applicable design regulations are followed. Risk of injury to
fingers and hands. Never put your hands in the saw blade area. Parts of
workpieces and tools leave damaged tools: Wear safety glasses Noise emissions:
Hearing protectors must be worn Wood emissions: Wear a respirator Despite all
the preventive measures taken, there may still be hidden residual risks.
Residual risks can be minimized by following the safety instructions and using
them in accordance with the stipulated provisions and operating instructions.
Dust exposure is affected by the type of material being processed. It is
important to use local exhaust (trapping near the source) and to properly
adjust the exhaust covers, guides, and grabs. Dust from work is often harmful
and must not get into your body. Use a hood and use a suitable respirator. Any
dust deposited, eg by vacuuming. Use saw blades designed to reduce radiated
noise. Keep the machine and saw blade running. To minimize noise generation,
the tool must be sharpened and all noise minimization elements (covers, etc.)
must be properly adjusted.
Emergency procedure
Perform the first aid procedure appropriate to the injury and call qualified
medical care as soon as possible. Protect the victim from further damage and
calm him down. If you
are looking for help, please provide the following information: 1. Place of
accident, 2. Type of accident, 3. A number of injured persons, 4. Type (s) of
injury
Symbols
| **** | CAUTION! WARNING |
|---|---|
| Caution! |
Read the operating instructions to reduce the risk of injury.
| Always wear goggles when using the machine.
| Wear ear protectors!
| Wear safety shoes with steel reinforcement!
| Safety gloves are to be used!
| Wear a respirator!
| Disconnect the PTO before any work
| To be used outdoors only.
| Keep dry at all times.. Never expose the tool to rain.
| Always keep your hands away from the path of the saw blade.
| Keep the machine out of reach of children.
| Keep a distance of persons Observe to keep out of the dangerous zone
| Warning against thrown-off items
| Warning against rotating parts
| Warning against cutting injuries
| Only use tools that meet standard EN 847-1.
| Rotation of the saw blade
| Remove all undesirable items, e.g. nails and wire, before working
| Do not press too much
| Strong
| Slow
| CE marking
| Sound power level LWA
| The direction of rotation of the PTO shaft /PTO speed max.540min-1
Safety instructions for circular saws for firewood
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear gloves when handling saw blades and rough materials.
When being operated, the machine must stand on a horizontal and flat surface
and the floor around the machine must be flat, well-maintained, and with no
waste, such as sawdust and cuttings.
The processed bundle of workpieces and finished workpieces should be placed
near the standard place of work of the operator.
Switch the machine off and unplug it when unattended.
Check all screw and plug-in connections and protective equipment if firm
and tightened properly and whether all moving parts are running smoothly
whenever the appliance is to be put into operation.
The protective equipment on the appliance is strictly prohibited to be
disassembled, changed, or used in conflict with the designation and it is
prohibited to attach any protective equipment of other manufacturers.
For cleaning and maintenance, the following safety guards must be removed::
Additional safety device for saw blade protection After carrying out the work,
all safety guards must be reinstalled again correctly! See the image
description.
**** The appliance must not be used if damaged or if safety equipment is
defective. Replace any worn-out and damaged parts.
Any faults with the machine, including any related to the safeguard or the saw
blades, must be reported to the persons in charge of safety as soon as the
faults are discovered. Before pressing On/Off, make sure the saw blade has
been fitted properly. The saw must not be used any longer if the cradle fails
to automatically return to the rest position. The saw must not be used any
longer if the saw blade fails to stop 10 seconds after switching the machine
off. For security, use devices such as safety- and pressure devices, guide
slides, rip fences, etc. Removing sawdust and chippings from the machine when
running is strictly prohibited. It is necessary to refrain from removing any
cuttings and parts of workpieces from the cutting area. Do not use saw blades
that are damaged or deformed Properly sharpened saw blades are to be used
only. Follow instructions for the use, adjustment, and repair of saw blades of
manufacturers. Do not use saw blades not corresponding to the key data given
in these instructions for use. The rated speed of the accessory must be at
least equal to the maximum speed marked on the power tool. Only use tools that
meet standard EN 847-1. Transport and store the tools in a suitable
receptacle; To minimize noise production, the tool must be sharpened and all
elements for noise minimization (covers, etc.) must be properly adjusted.
Replace the table insert when worn Familiarise yourself with the safety
procedures for cleaning, maintenance, and regular removal of sawdust and dust
to reduce the risk of fire. Make sure the flange used is suitable for the
given purpose of use, as specified by the manufacturer. Use only original
accessories and original spare parts. Handling equipment is to be used only
when handling the machine. Make sure the device cannot roll away, fall over or
tip over with suitable fastening devices.
– Provide sufficient general or local lighting for the work area.
– Observe the maximum speed indicated on the saw blades.
– Ensure that the guards and other safety devices necessary for operating the
machine are in place, in good working order, and properly maintained.
– Operators must be adequately trained in the use, adjustment, and operation
of the machine.
– Installation and major repair work may only be carried out by specially
trained personnel
Additional safety instructions for PTO- operation
For tractors with hydraulic or air pressure switch Power, the take-off shaft
coupling must be a PTO shaft with freewheel can be used.
To rectify faults or remove
If a piece of wood is jammed, stop the machine, switch off the tractor and
remove the ignition key pull out.
When leaving the workplace, pull the tractor and remove the ignition key.
During transport, the PTO operation must be switched off be.
The warning plate with rear light DIN 110030 must be attached to the saw is
mounted and the rear light on the tractor must be connected.
The saw may only be connected to tractors with a 3-point linkage. Categories 1
and 2.
PTO shaft speed max. 540 min-1.
The direction of rotation of the PTO shaft is counterclockwise. The power
take-off shaft is prevented from rotating when operating with the chain
secure. The universal joint
shaft after uncoupling from the tractor hangs on the retaining bracket.
Maintenance
Repairs and works specified in these Instructions may only be performed by
qualified authorized staff.
Use only original accessories and original spare parts.
If necessary, a list of spare parts can be found at
www.guede.com.
Carry out a visual inspection before switching the appliance on.
At all times, keep the machine, and ventilation slots, in particular, clean.
The sawdust ejection and/or dust exhauster should be cleaned at regular
intervals. Never spray water on the machine!
All moving parts should be treated with environmental-friendly oil. Never use
any grease!
The ball bearings of the saw shaft are protected against dust and are
therefore service-free, i.e. the bearings need not be lubricated.
Keep the device, in particular the air vents, clean at all times. Never spray
water on the device’s body! Do not clean the plastics with solvents, or
flammable or toxic fluids. For cleaning, use a damp cloth only. Only a
regularly maintained and treated appliance can serve as a satisfactory aid.
Insufficient maintenance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
Guarantee
The warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defects or manufacturing defects. An original payment voucher with the date of the sale needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorized use such as appliance overloading, use of violence, or damage as a result of any unauthorized interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product in or after the warranty
period must be made in the original packaging.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or
operating instructions? We will quickly help you without needles bureaucracy
at our web pages at www.guede.com in the Servicing
part. Please help us be able to help you. In order to identify your device in
case of claim we need the serial No., product No. and year of production. All
this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned
appliances correspond – at the type of construction being launched – to the
appropriate basic safety and hygienic requirements of EC Directives. In case
of any change to the appliance is not discussed with us, the Declaration
expires.
Log Cutting Saw
Seghe a culla
1729 GWS 700 ZR HM-2
2014/35/EU
1935/2004/EC
2011/65/EU&2015/863/EU
2016/425/EU (PPE)
× 2006/42/EC
Annex IV
Notified Body
No: 0123
Adress: Ridlerstraße 65
D-80339 München Germany
2014/30/EU
1907/2006/EC
2016/426/EU
2014/29/EU
2015/1188/EU
Type Ex. Cert.-No.:
97/68/EC_&2016/1628/EU
M6A 0405790237 Rev. 00
Emission No.:
2000/14/EC_2005/88/EC
Method of compliance assessment
Annex VI
Harmonized standards used
EN 1870-6:2017
EN ISO 12100:2010
AfPS GS 2014:01 PAK
Guaranteed sound power level
Measured sound power level
Helmut Arnold
Managing Director
Authorized to compile the technical file
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
www.guede.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>