SmallRig 220W Bi Color LED Video Light User Manual

SmallRig 220W Bi Color LED Video Light

Foreword
Thank you for choosing SmallRig RC 220B LED Video Light.

Instructions

1. Please read this user manual carefully.
2. Keep this user manual and always include it when passing the product onto the third party.
3. Heed all warnings and follow all instructions in this user manual.
4. Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.
5. Care must be taken as burns can occur from touching hot surfaces.
6. Do noi: operate the fixture if a cord is damaged or if the fixture has been dropped or damaged until it has been examined by qualified service personnel.
7. Posrtion any power cables so that they will not be tripped over, pulled or put into contact with hot suliaces
8. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cords rated for less amperage than the fixture may overheat.
9. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing or when not in use. Never yank the CO(d to remove the plug from the outlet
10. Let the lighting fixture cool complete before storing.
11. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids
12. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact smallr1g@smallng.com or take it to qualified service personnel when service or repair work Is required.
13. The use of an accessory anachment not recommended by the manufacturer may increase the risk off1re, electric shock, or injury to any person operating the fixture.
14. Power this fixture by connecting rt to a grounded outlet
15. Please remove the protection cover before powering the light.
16. Please remove the EVA protection cover before using the reflector.
17. Please do not block the ventilation and do not look at the light directly when it is powered on.
18. Please do not place the LED lighting fixture near any liquids or other flammable objects.
19.  Only use a dry microfiber cloth to clean the product
20. Please have the product checked by an authorized service personnel agent if your product has a problem.
21.  The malfunctions caused by unauthorized disassembly are not covered under the warranty.
22. We recommend only using the original SmallRig cable accessories. Please no1e that our warranty for this product does not apply to any repairs required due to any malfunctions of unauthorized SmallRig accessories, although yoo may request such repairs for a fee.
23. This product is certified by CE,UKCA,RoHS,FCC,IC,TELEC and RCM.Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
24. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifications change.

Check list

When you unbox the product, please make sure all the items below are included. Otherwise, contact with the seller immediately

Product Details

Installations

1. Attaching /detaching the protection coverSmallRig 220W Bi Color LED Video Light
2. Installation and removal of the reAector
3. Setting up the light
4. Soft light umbrella ins1allation

The power supply

1. Powered by AC
2. Powered by V-rnount battery

Notice :

1. Please press the spring-loaded lock button on the power cord to remove it. Do not pull h out forcibly.
2. V-mount battery plate, battery, and power cable are not standard configurations and need to buy separately.
3. The input voltage of the light is between DC 12V and DC 30V.
4. The V-mount batteries that are 14.4V or 26V with the capacity aOOve lSOWh are recommended to use with the light.
5. When using the 14 4V V mount battery or AC adapter under 20V, the malCimum output will be reduced by 50%

Operations

1. Press the power button to turn the light on and off.

2. Manual control

3. Brightness adjustment
   Rotate the INT adjusting knob to adjust the brightness with 1 % variable and the brightness change range is 0-1 00%. the change of the brightness will be displayed in real time on the llgh1 body

4. Color temperature adjustment
   Short JJ(ess the INT knob to adjust the color temperature, and the CCT range is 2700K-6500K

5. FX control
   a. Rotate the FX knob on the right to get Normal and Paparazzi/TV/Fault bulb/Lightning/Breath/Party/Flash/ Flame/Firework , nine kinds of FX.
   b. Shot Press the FX knob then switch to the frequency adjustment. the change range is 1-1 o.
   Notice: The brightness of every FX can be set separately

6. Bluetooth reset

7. Long press the Reset button for 3 seconds. the Bluetooth icon will appear in the upper right if the LCD display. The icon fiashes 6 times and the Bluetooth is reset.

8. Then you can connect the ltght through SmallGoGo and control It again.

9. 0TA mode
   Fir 0TA mode
   mware upclates can be updated on1ine via the SmallGoGo App for OTA updates.

10. App control
    The user can downlm1d the Sma11GoGo App and connect the the device named 220B-xxxxxx. After the light is controlled by the App.the Bluetooth icon will be displayed on the upper right of the tight LCD
    Notice: Please enable the mobile location function when using the App.

11. Using the SmallGoGo App
    You can download the SmallGoGo App from the iOS App or Google Play Store for enhancing the functionality of the light
    Please visit www.smallgogo.com for more details regarding how to use the app to control you lights

Specifications

Photometrics

CCT

| ‘,,. Distance

‘ ,,

Illumination·’,,,,

‘

|

lm

504(/c)

54201ux)

459!(fc)

49400(1ux)

623(fc)

6700(lux)

5929(fc)

63800(1ux)

|

3m

56(/c)

598(1ux)

36l(fc)

3880(1ux)

71(fc)

762(1ux)

464(fc)

4990(1ux)

|

5m

22(/c)

239(1ux)

126(fc)

1360(1ux)

28(fc)

302(1ux)

163(fc)

1750(1ux)

|
---|---|---|---|---|---

2700K

| Bare Bulb

Hyper-Reflector

Bare Bulb

Hyper-Reflector

|

3200K

|

5600K

|

Bare Bulb

Hyper-Reflector

Bare Bulb

| 806(fc)

8670(1ux)

7853(fc)

B4SOO(lux) 699(/c)

7520(1ux)

| 9l(fc)

977(Iux)

613(fc)

6600(1ux)

845(Iux)

| 36(fc)

386(1ux)

215(fc)

2310(1ux)

337(1ux)

|

6500K

|
| 683l(fc)| 537(fc)| 188(fc)|
| Hyper-Reflector|

73500(1ux)

|

5780(1ux)

|

2020(1ux)

|

Service Warranty

Please keep your original purchase receipt and warranty card, including your purchase date, product serial number, etc., which are required for the warranty service.

After-sale warranty terms

1. 7 Days DOA Return Polic Within 7 Days from the date of the package receipt, return or replacement can be done if the item received is malfunctioning or physical damaged ( not caused by human abused ), return shipping cost will be on SmallRig’s charge.
2. I -Year Warranty: Within 1-year from 1he date of the package receipt, defective product which is not caused by human abused is eligible to get repair/replacement
   for free; defective product which is caused by human abused, repair/replacement will be charged based on the damage level.

This warranty does not cover

1. Defect caused by users’violation of theInstructions” and “Usage Steps”.
2. The product identification or SN label is removed or defaced in any way.
3. The product is serviced or repaired by anyone other than our company or the service agency authorized by our company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>