globe GB34204 Smart Lamp with Wi-Fi Function Instructions
- June 5, 2024
- globe
Table of Contents
globe GB34204 Smart Lamp with Wi-Fi Function
LIMITED WARRANTY
This bulb is warranted to last 3 years from the date of purchase based on use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the bulb, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.
CAUTION:
DO NOT USE WITH STANDARD DIMMER. Only use the control provided with or
specified by these instructions to control this lamp. This lamp will not
operate properly when connected to a standard (incandescent) dimmer or dimming
control. The bulb can be switched to different operating modes and is dimmable
through the Globe Suite™ app. For use only in 120V/60HZ circuits. Risk of
electrical shock. Do not open, no user-serviceable parts inside. This device
is not intended for use with emergency exit fixtures or emergency exit lights,
photocells and electronic timers. This device is intended for indoor use. Do
not use where directly exposed to water. Minimum operating temperature is
-20°C (-4° F). This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (l) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment. This Class B digital apparatus
complies with CAN ICES-OOS(B).
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.
QUSER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (7) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-005 (B).
RADIATION EXPOSURE STATEMENT
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
1-888-353-1388
15301 Shoemaker Ave Norwalk, CA 90650 www.globe-electric.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>