Shenzhen Na Yin Technology NY01B Wireless Earphones User Manual

Shenzhen Na Yin Technology NY01B Wireless Earphones

Power on

1. Press and hold the MFB button for 1 second and the blue indicator light will flash for 1 second, then the voice guidance “power on'”, it will automatically enter the pairing state after booting.
2. If there was pairing record, it will automatically enter the reconnecting mode after turned on.
3. If the earphone fails to connect for 10 seconds, it will automatically enter the reconnecting mode.

Fitting and Wearing

Gently push the earphones into your ear and adjust the earphones to get a comfortable fitting.

Pairing

1. For the first pairing: when the earphone turns on, it will automaticlly enter the pairing mode. Activate the Bluetooth function on your device and search for “NY01B”. Click the “NY01B’ to connect and the LED light will flash in blue
   for 1 second. When you hear the voice assistant “Your headset is connected”, the earphone finished pairing.

2. If you had connected with earphone, press and hold the MFB button for 5 seconds to enter the pairing mode while the earphone turns off.

Charging
Connect the earphone to DC 5V charger, while the charging time, the LED light flash in red. When fully charged, the LED light will turn into blue.

General Function

• Answer/Hang up/Reject a call
  Answer/Hang up/Reject a cal!: Press the MFB button once to answer/hang up a call. Press for 1 second to reject an incoming cal

• Three-way call

  • AG1 is in the call and it accesses another call, press the MFB button to answer the second call;
  • AG1 is in the call and the second call is waiting, after press the MFB button twice, it will switch to the second call and the first call in holding on.

• Call back
  In the conne cting and playing state press and hold the volume up and downfor 1 second to automatically redial

• Power off
  Press and hold the MFB button for 3 second, the LED light will flash in red for 2 seconds. You will hear the voice guidance “power off”

• Volume up & down
  Press the+/- button to tum up/down the volume.

• Previous song & Next song
  Press the +/l- button for 1 second to switch to the next /previous song.

• Play/Pause
  Press the MFB button once to pause, and press again to play.

• SIRI/Voice Assistant
  When the earphone in the connected mode, press the MFB button twice to active the SIRI/vaice assistant

• Factory reset
  Turn off the earphone, press and hold the MFB button for 10 seconds until the LED light flash in red and blue alternately 3 time. When you hear the tone, the earphone finished reset.

• Press for 10 seconds
  Product Featrues
  Bluetooth version 5.0, which is compatible with over 99% of mob ile phones.

• Basic parameters

  • Bluetooth Version: V5.0
  • Bluetooth Profile: A2DP V1.3 AVRCP V1.6 HFP V1.2 SPP V1.2 PSAP V1.0
  • Frequency range: 2.402GHz-2.480GHz
  • Earphones capacity: 3.7V 120mAh
  • Charging Time: 2 hours
  • Charging cable: Micro USB
  • Wireless Range: 10m
    Notes:
    Playtime deponds on many factors, the data may have discrepancy with the real situation

FAQ/Trouble Shooting

• Q had connected the earphone with my smartphone, but I can’ t hear any sound?

  • A: 1.Please make sure that you tun up the volume. Some smartphone may require you to setup the bluetooth earphones as an audio output device before transmitting sound.
  • If you are using a music player or other Bluetooth device, please make it supports A2DP stereo music profile.
  • Before using the earphone, make sure that you have seen the the user manual.

• Q Why the connection can’t be stable and cuts off intermittently
  A Please make sure that there are no objects, radio or WIFI interference between the earphone and device.

• Q:Can I use the earphones while charging?
  : NO.

• Q:The earphone has no response no matter what I do.
  A: Please try to reset the earphones.(see the “reset” section of user manual)

• Q:I can’ t hear the sound clearly/the caller can’t there my voice clearly.
  A: Please adjust the volume on your device and earphone. Make sure that there is no source of interference

Tips

1. Before using the earphone, please read the manual carefully and keep it for future references.
2. The earphone need to be fully charged for the first-time using.
3. If you didn’t used the earphone for over 2 weeks please recharge it regular.
4. Please only use the chargers, which made by qualified manufacturer.
5. If the earphones cannot be searched by your device, please check whether it is in pairing mode.
6. If the earphone is in disconnected mode for a long while,it will sign out from pairing mode, please re-enter the pairing mode.
7. If your device occurs a procedure error, please reboot your device; if the earphone occurs a procedure error, please reset earphone.

Safety Rules

1. Do not disassemble or modify the earphone for any reasons to avoid any damage or danger.
2. Do not use earphone on a thunderstorm weather to avoid irregular function.
3. Do not use harsh chemicals or strong detergents to clean the earphone.
4. Please store the earphone in dry condition.

• Product Name: Wireless Earphones
• Product Model: NY01B
  FCC ID: 2AF8Q-NY01B

Product designation,model and MIC ID are be listed on charging case, manual and packaging box

FCC

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• -Reorient or relocate the receiving antenna
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>