Eibach E10-27-013-01-22 Pro Kit Performance Lowering Springs Instruction Manual
- June 14, 2024
- Eibach
Table of Contents
Eibach E10-27-013-01-22 Pro Kit Performance Lowering Springs Instruction
Manual
E10-27-013-01-22
2021+ Dodge Durango SRT Hellcat
Notes
Kit Contents
Description Part Number Quantity
Front Spring Rear Spring Front Bump Stop
F11-27-013-01-FA 2
F11-27-013-01-RA 2
1J0412303
Installation
Read all instructions before beginning installation
- Only qualified mechanics experienced in the installation and removal of suspension components should perform this
- Use of a hoist and screw jack is highly recommended and will substantially reduce installation
- Never work on or under a vehicle unless it is properly supported by safety stands and wheels are
- Never use impact wrenches or impact guns to install or remove shock absorber piston components, shafts and Piston rod
- All Eibach springs should be installed with the Eibach logo right-side-up. All original stock spring isolators and dampers should be retained from the stock springs when installing Eibach PRO-KIT
- After Installation, inspect and adjust the following: Wheel Alignment; tire/wheel fender clearance when using aftermarket wheels or tires; brake line clearance and attachments; anti-lock-brake system
- Tire Rotation: In order to increase the life of your tires, it is recommended to rotate your tires every 3,000
For MacPherson Strut type front suspension, it is important to mark the
orientation of the upper perch with respect to the lower perch before
disassembly. This orientation must remain the same with the installation of
the springs. Noise may result if this procedure is not performed correctly
Read all instructions before beginning installation Notes
Bump Stop Modification
Read More About This Manual & Download PDF
References
Read User Manual Online (PDF format)
Loading......