LEKATO K380S Rechargeable Wireless Microphones User Manual

LEKATO K380S Rechargeable Wireless Microphones

FEATURES

•  2.4G wireless ID pairing technology, support 10 channels, and support multiple sets using in a band simultaneously.
•  Microphone battery is rechargeable.
•  Application fields : Personal entertainment, home KTV, parties, education, advertising, conferences and other purposes.

INTRODUCTION

Microphone

1. Power key/frequency conversion key
2. Paring button (PAIR)
3. Type C charging port
4. Current working microphone (A/B)
5. Current working channel (CH01-CH10)
6. Battery level (turned off automatically when the battery is too low)
7. TX transmit signal strength

Receiver

1. 06.35 plug into speakers

2. Receiving indicator of microphone B

3. Power switch button (a long press of which will power the device on/off )

4. Type-C charging port and its red indicator.The red light will be turned off when
   charging is finished.

5. Receiving indicator of microphone A

6. Low-battery indicator (The orange LED flashed when it’s low battery.)

Technical Parameters

K380S is equipped with a 1 to 2 type-C charging cable, which can charge 2 microphones at the same time. The output current of DCSV power adapter is required to be 2A or above at this moment,. Otherwise, please charge the microphones one by one.

Instructions for use

1. Microphone
   Long press power key” 6 ” to turn on/off and short press to change working channel (CH01-CH10).

2. Receiver
   Long press power button” 6″ to turn on, insert the receiver into the audio outlet, and the microphone will work normally when the indicator MICNMICB long-lighted. (The indicator flashes to indicate that no microphone signal has been received)

3. Charging and Low battery LED
   Microphone: At low power, the power indicator is decreased to flash or shut down; At charging, the power sign rolls; after full charge, the power sign stops rolling. Receiver: The orange lamp flickers when the power is low, the charging indicator lights up when charging, and the charging indicator lights out when it is full.

Pairing operation

Microphone:

In the state of power-off, first hold press the PAIR key in the tail pipe of the microphone, then hold press the power key” 6 “of the microphone, wait for the screen to display the PAIR character and flicker, then release the key, indicating that it has entered the matching state.

Receiver:

1.  When the microphone is under the pairing mode and the receiver is on, carry out the operation of short press for two times on the power key quickly to enter the pairing state.
2.  When the pairing is successful, the indicator light of the receiver will be on for a long time.

The function of pairing:
Both microphone and Receiver are identified uniquely for each other. Support multiple sets using in a band simultaneously. (Both the microphone and receiver have an ID pairing time limit. If there is no pairing for more than 30 seconds, ID pairing will be automatically exited)

Troubleshooting

1.  Microphone or receiver can’t be turned on:
   Microphone/receiver power is low battery, please charge it.

2.  The microphone squeals:
   When microphone is too close to the stereo or sound volume is too high, Please reduce the volume of speakers and take K380S far away from the speakers.

3.  The microphones can’ t be charged fully when two microphones are charged in same time by a same cable: the LED screen shows it’ s charging for a long time. Reason: The output current of power adapter is required to be 2A or above when two microphones are charged in same time. Otherwise, the power adapter will been caused over-current protection so that microphones can’t be charged fully.
   Solution: Please charge the microphones one by one if you use a power adapter with a current of 1 A or less, or a general computer USB port.

PACK LIST

• Microphone ———————2
• Receiver ————————–1
• USB to Type-C charging cable —1
• Anti-skid ring—————2
• User Manual—————-1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>