LEKATO WT-1 Wireless Page Turner Pedal User Manual

LEKATO WT-1 Wireless Page Turner Pedal

Product Description

Thank you for purchasing our wireless page turner pedal. This wireless page turner pedal can connect to your personal computers, laptops, iPhone, iPad, iPod and Android devices via Bluetooth, and control the page turning of your sheet music in the music app through the left and right pedals.Let this product bring you more convenience and happiness.

Specification

• Name: Wireless Page Turner Pedal
• Model: WT-1
• Dimension: 7.14.11 in (18010525 mm)
• Weight: 0.661b (0.3kg)
• Power : DCSVS00mA
• Operating Distance: 33ft (10m}
• Operating Frequency: 2402-2480 MHz
• Battery Life: 60+ hours{once fully charged)

POWER and REPEAT switches

1. Switch “POWER” to “ON” to turn on the power and enter the waiting state for pairing; Switch “POWER” to “OFF” to turn off the power.
2. When “REPEAT” is turned on, long press the pedal, the page will switch continuously until the pedal is released; When “REPEAT” is off, there is no difference between long press and short press.

Five Buttons, Five Control Models

When the function is operating, the corresponding yellow indicator light above the function button will be on.

NOTE: Since different apps respond to different control models, you need to find out which control model your app can respond to when you first use it

Power Indicator Light

After turning on the power, the LED indicator will flash in different colors to show the battery level.

How to connect

NOTE: When you need to connect to other devices, please clear the Bluetooth connection record of the original device (cancel the Bluetooth pairing of the original device), and restart the wireless page turner to prepare for connecting to other devices.If you still cannot successfully connect to the new device via Bluetooth, please use a thin wire to long press the “Reset” button. When the R-G-B indicator flashes, it indicates that the factory settings have been restored and Bluetooth pairing can be performed.

Indicator Introduction

• Status Indicator
• Waiting for pairing R-G-B flash alternately
• Connection succeeded Slow flashing(lndicator color is the color of current battery level)
• Lost connection Fast flashing(lndicator color is the color of current battery level)

Power Nap and Wake-up

1. When the Bluetooth pairing is successful, it will automatically enter the nap state after 25 minutes of inactivity.
2. When it is powered on but not paired with Bluetooth, it will automatically enter the nap state after 5 minutes of inactivity.
3. Please press any pedal to wake up the wireless page turner

Charging

1. The indicator light keeps red when charging, and keeps green when fully charged;

2. Use the attached USB data cable to connect to the computer(SV output), it takes about 1 hours to fully charge.
   Note: The charging time is affected by the power condition of the computer.

3. For outdoor use, please make sure that the current indicator light is green before going out;

4. To protect the battery, please charge it in time when the red light is on.

Recommended Apps

How to Maintain

1. Please turn off the switch “POWER” before charging;
2. Do not use a damp cloth to clean while charging;
3. Please wipe the surface of the product with a clean soft cloth. https://lekatodeal.com Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>