LEKATO String Swing Guitar Wall Hanger Aluminum Guitar Instruction Manual
- June 9, 2024
- LEKATO
Table of Contents
LEKATO String Swing Guitar Wall Hanger Aluminum Guitar
Thanks for supporting LEKATO.
PACKAGE
HOW TO INSTALL
-
Firstly assemble base plates with accessory A, press the button and push accessory A into the plate slot to lock it.After the plates are assembled, install accessory B on both end sides of the base plates.
-
Secondly, install the plate into the wall.(Needs tools such as hand drill, hammer, balance ruler, Phillips screwdriver, etc.(Please use an 8mm electric drill bit to make holes in the wall when need to use the anchors ).
-
Thirdly install the hanger(Don’t get the wrong direction of the hook when installing, the side has two round holes should on the top).
After inserting the hanger into the plate slot, you can loosen the knob of the hanger to adjust the angle and position you want. then tighten the knob.
NOTE:
-
Each hook has 2 detachable round rubbers.you can choose to detach it or not to fit different shapes of different guitar necks.
-
Please kindly note that the install tools are NOT included in the package,you need to prepare by yourself)