BRESSER 7009995 Thermo Hygro 3CH Sensor 433MHz Instruction Manual

: June 5, 2024
: BRESSER

Table of Contents

General Warning
FEATURES OF THE REMOTE UNIT
FIRST OPERATION
TECHNICAL DATA:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

7009995 Thermo Hygro 3CH Sensor 433MHz
**Instruction Manual

**

Thermo-Hygro-3CH-Sensor 433MHz
Art. Nr.: 7009995

MANUAL DOWNLOAD:
www.bresser.de/P7009995

Instruction Manual

General Warning

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise, you run the risk of an electric shock.
Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!
NOTE! Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.
NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before cleaning. NOTE! Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.

SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not included): 2 pcs. Batteries (1.5V, type AA)

FEATURES OF THE REMOTE UNIT

A. LED INDICATOR
Flashes when information is being transmitted to the weather station.
B .DISPLAY (ON FRONT SIDE)
Displays temperature, current channel, and low battery warning symbol [ ].
C .WALL MOUNT
For mounting the sensor on walls.
D . RESET BUTTON
Press to reset all settings if you have selected a different channel.
E . SET THE TRANSMISSION CHANNEL
(1-3) Input channel for the weather station. Set the channel before inserting the batteries.
F . BATTERY COMPARTMENT
The unit requires 2 pcs. UM-3 or “AA” 1.5V batteries.
G. STAND
For positioning the device on a flat surface.

FIRST OPERATION

Open the battery compartment cover.
Set the desired channel with the switch. If you are using only one transmitter, please leave the selection at,,1″.
Insert 2 new UM-4 or,, AA” 1.5V batteries observing correct polarity.
Close the battery compartment cover and set the unit in the desired location.

Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain, or snow.
TIPS FOR SETTING UP:

Please follow the instructions below to ensure optimum operation of the equipment:

Assign each external transmitter unit its own channel.
Place the receiver unit and transmitter unit within 1 meter of each other and activate the manual search for available signals from all connected outdoor sensors on the main unit (weather station not included with delivery).
Batteries empty” indicator When batteries are nearing depletion, the symbol [ ] is displayed on the sensor and weather station.

DISPOSAL
Dispose of the packaging materials properly, according to their types, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. The disposal in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a chemical symbol.

the battery contains cadmium
battery contains mercury
battery contains lead

EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number: 7009995 is in compliance with Directive: 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/7009995/CE/7009995_CE.pdf
UKCA DECLARATION OF CONFORMITY
Bresser GmbH has issued a ,, Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/7009995/UKCA/7009995_UKCA.pdf

TECHNICAL DATA:

Measurement
Temperature range: -20-60 °C (-4-140 °F)
Temperature steps: 0.1 °C/°F
Humidity range: 20-90% RH Humidity steps: 1%
Transmission
Transmission frequency: 433,92 MHz
Maximum transmission power < 10mW
Transmission range: 30 meters (free field)
Power supply
2x AA 1.5V batteries (not included)
Manual_7009995_Thermo-Hygrosensor_de-en_BRESSER_v022022a

Bresser GmbH
Gutenbergstr. 2
DE-46414 Rhede
Germany
Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way, Edenbridge, Kent TN8 6HF, GB
Service:
Web: www.bresser.de/weather
E-Mail: service@bresser.de