Worx WG620E Portable Power Cleaner Water Sprayer Instruction Manual

: June 5, 2024
: Worx

Worx WG620E Portable Power Cleaner Water Sprayer

Worx WG620E Portable Power Cleaner Water Sprayer
product

PRODUCT SAFETY

GENERAL SAFETY

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, ﬁre and/or serious injury.
Save all warnings and instructions for future reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.

Safety warnings for battery-operated appliances

Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the appliance before being charged.
Different types of batteries or new and used batteries are not to be mixed.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the appliance and safely disposed of.
If the appliance is to be stored unused for a long period, the batteries should be removed.
The supply terminals are not to be short-circuited.

Additional safety warnings for liquid cleaner

The liquid must not be directed towards equipment containing electrical components.
Remove or disconnect the battery pack after use and before carrying out user maintenance on the appliance.
The appliance shall not be left unattended while it is connected to the battery pack.
The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
Keep the appliance out of reach of children when it is energized.

SAFETY WARNINGS FOR BATTERY PACK

Do not dismantle, open or shred cells or battery pack.
Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a ﬁre.
Do not expose battery pack to heat or ﬁre. Avoid storage in direct sunlight.
Do not subject battery pack to mechanical shock.
In the event of battery leaking, do not allow the liquid to come into contact
with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Seek medical advice immediately if a cell or battery pack has been swallowed.
Keep battery pack clean and dry.
Wipe the battery pack terminals with a clean dry cloth if they become dirty.
Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
Do not maintain battery pack on charge when not in use.
After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
Battery pack gives its best performance when it is operated at normal room temperature (20°C ± 5°C).
When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other.
Recharge only with the charger speciﬁed by Worx. Do not use any charger other than that speciﬁcally provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of ﬁre when used with another battery pack.
Do not use any battery pack which is not designed for use with the equipment.
Keep battery pack out of the reach of children.
Retain the original product literature for future reference.
Remove the battery from the equipment when not in use.
Dispose of properly.
Do not mix cells of different manufacture, capacity, size or type within a device.
Do not remove battery pack from its original packaging until required for use.
Observe the plus (+) and minus (–) marks on the battery and ensure correct use.

SYMBOLS

Warning
Read operator’s manual
Li-Ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment. Battery packs can be hazardous for the environment and for human health since they contain hazardous substances.
Do not burn
Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
Remove battery from the socket before carrying out any adjustment, servicing or maintenance.
Unlock
Lock
RCM marking

COMPONENT LIST

LOCK-OFF SWITCH
BATTERY PACK RELEASE BUTTON
BATTERY PACK
ON/OFF SWITCH LEVER
HOSE ADAPTER
POWER NOZZLE
PRESSURE CLEANING LANCE
NOZZLE ADAPTER
MULTI-SPRAY NOZZLE
FIXING NAIL
HOSE CONNECTOR
HOSE FILTER
HOSE CLIP
HOSE
FLOATER
SOAP BOTTLE* (WA4036)
BRUSH* (WA4048)
FOLDABLE WATER BUCKET* (WA4015)
FILTER SCREEN (SEE E2)
TURBO NOZZLE * (WA4037)
WINDOW SQUEEGEE WITH WATER SPRAYER * (WA4050)
BOTTLE CAP CONNECTOR * (WA4038)
EXTENSION LANCE* (WA4012)
PIVOTING QUICK CONNECT ADAPTER* (WA4039)
ROTARY CLEANING BRUSH* (WA4042)
ADJUSTABLE POWER SCRUBBER* (WA1820 / WA1821
SHORT LANCE* (WA4013
NOZZLE (00/150) *

Worx WG620E Portable Power Cleaner Water Sprayer 01

TECHNICAL DATA

Type Designation
WG620E WG620E.2 WG620E.4 WG620E.5 WG620E.6 WG620E.7 WG620E.9 (620-649 – designation of machinery, representative of battery-powered washer)

|

WG620E WG620E.2 WG620E.4 WG620E.5

| WG620E.6 WG620E.7| WG620E.9
---|---|---|---
Voltage|

20 V Max**

Max. pressure

| 2.4 Mpa (24 bar)
Rated pressure|

2.2 Mpa (22 bar)

Max water flow rate

| 120 L/h
Max. inlet water pressure|

0.6 Mpa (6 bar)

Suction height

| Max. 1.5 m
Weight (with lance)| 1.7 kg| 1.8 kg|

1.3 kg

Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.

ACCESSORIES

|

WG620E

| WG620E.2| WG620E.4| WG620E.5| WG620E.6| WG620E.7|

WG620E.9

---|---|---|---|---|---|---|---

Hose (6m)

| 1| 1| 1| 1| 1| 1| 1
Pressure cleaning lance| **** 1| 1| 1| 1| 1| 1|

1

Multi-Spray nozzle

| 1| 1| 1| 1| 1| /| 1
Battery pack (WA3551)| 1| 1| 2| 2| 1| 1|

/

Charger (WA3880)

| 1| 1| 1| 1| 1| /| /
Charger (WA3760)| /| /| /| /| /| 1|

/

Brush (WA4048)

| /| 1| 1| /| /| /| /
Soap bottle (WA4036)| /| 1| 1| /| /| /|

/

Foldable water bucket (WA4015)| /| 1| 1| /| /| /|

/

Bottle cap connector (WA4038)

| /| 1| 1| 1| 1| /| /
Turbo nozzle (WA4037)| /| /| /| /| /| /|

/

Window squeegee with water sprayer (WA4050)	/	/	/	/	/	/	/
Extension lance (WA4012)	/	/	/	/	/	/	/
Pivoting quick connect adapter (WA4039)	/	/	/	/	/	/	/
Rotary cleaning brush (WA4042)	/	/	/	/	/	/	/
Adjustable power scrubber (WA1820 / WA1821)	/	/	/	/	/	/	/
Shor t lance (WA4013)	/	/	/	/	/	/	/
0° Nozzle	/	/	/	/	/	1	/
15°Nozzle	/	/	/	/	/	1	/

We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

OPERATING INSTRUCTIONS

NOTE : Before using the tool, read the instruction book carefully.

INTENDED USE

This tool is intended for cleaning and watering.

ASSEMBLY & OPERATION

ACTION

| FIGURE
---|---

BEFORE OPERATION

|
Installing the battery pack|
Removing the battery pack|
Checking the battery condition
NOTE: Fig. A3 only applies for the battery pack with battery indicator light.|
Charging the battery pack
More details can be found in charger’s manual|

ASSEMBLY

|
Attaching pressure cleaning lance to the power nozzle

NOTE: When attaching, align the two projections on the lance with the grooves of the power nozzle as shown in Fig. B.

|
Attaching the multi-spray nozzle
NOTE: when attaching, rotate the nozzle left and right to make sure the nozzle fully seated into position and gently pulling it to make sure it is locked into position securely.|
---|---
Attaching the 0 0/ 150 nozzle|
Attaching the hose to the power nozzle
NOTE: After the hose is attached, check the connection by gently pulling upon the hose. It should not be pulled off.|

Attaching your own water hose (optional)

Remove the hose adapter
Attach the home garden hose with suitable connectors

NOTE:

Besides the hose supplied, you can also connect the power nozzle to your own water hose with suitable connectors.
Check whether the filter screen is missing before retightening the hose adapter. When retightening the quick hose adapter, please tighten securely. Otherwise, it may not draw any water for proper operation.

|

OPERATION
WARNING:
The supplied battery is not waterproof. To avoid risk of battery failure, protect the battery from water exposure during use. Store the tool and battery in a dry place after use.|
Start
NOTE: At the first use, you need to empty the air in hose, place the power nozzle below waist level (<1.5m/5ft) and set it at high pressure. Do not start working until the water goes up along the hose and sprays out. This could take up to 30 seconds or more depending on the fresh water source.|
Selecting the nozzle pattern
NOTE: Choose a suitable nozzle pattern according to your work. Sprayؔ patterns 00, 150, 250 and 400 are applicable for cleaning, and the spray pattern with the symbol is best suitable for watering.
WARNING: Do not shift the nozzle pattern when the tool is powered on.|
Cleaning
WARNING: Do not connect the machine to water supplies that are dirty, rusty, muddy, or corrosive. (Including window cleaning liquids, plant foods, or fertilizers etc.)
NOTE: For proper maintenance after using with sea water, the product should be rinsed by fresh water.|

---|---
Watering|

ATTACHMENT OF ACCESSORIES

A number of accessories have been supplied with this product and are required for use in different applications. Do not attempt to use cleaning without a lance or any accessories attached.

Soap bottle (WA4036, sold separately)
Soap bottle provides detergent suds for deeper cleaning of dirt. It is used in conjunction with power nozzle or extension lance.
Brush (WA4048, sold separately)
Brush is for cleaning cars, boats, motorcycles etc. It is used in conjunction with power nozzle or extension lance.
Foldable water bucket (WA4015, sold separately)
Foldable water bucket allows you to connect to water supply when you are far away from a water source. When not in use, it can be folded for storage.
Turbo nozzle (WA4037, sold separately)
The turbo nozzle delivers 360° of rotating water, which cleans a larger area than the 0° water pattern during the same time period. Recommend to use it with high pressure setting
Window squeegee with water sprayer (WA4050, sold separately)
The window squeegees quick connection easily snaps into the tool to spray water or wipe off water from glass or tiled surfaces. Suitable for the Hydro Shot power cleaner or the extension lance.
Bottle cap connector (WA4038, sold separately)
The bottle cap connector accessory allows the tool to directly connect with most 2 Liter bottles with approximately 1” openings. (NOTE: May not ﬁt all consumable soda and water bottles)

WARNING : Do not install the bottle cap connector accessory until it is ready to be used. The accessories vents will leak liquid, if a bottle is installed, with the machine lying on a surface.

Pivoting Quick Connect Adapter (WA4039, sold separately)
The Pivoting Quick Connect Adapter allows power cleaning tips to be fully adjusted up to 180° in any direction. Ideal for cleaning around hard-to-reach areas. Suitable for the HYDROSHOTTM power cleaner and multi-spray nozzle
Rotary Cleaning Brush (WA4042, sold separately)
The rotary cleaning brush accessory easily snaps into the tool for cleaning sensitive surfaces and around tight spaces. Suitable for the HYDROSHOTTM power cleaner with/without the extension lance installed.
Adjustable Power Scrubber (WA1820 /WA1821), sold separately)
The water powered rotary scrubber accessory easily snaps into the tool for cleaning hard surfaces. Suitable for the HYDROSHOTTM power cleaner with/without the extension lance installed.

The soft scrubber (WA1820) is applicable for sensitive surfaces and the hard bristle scrubber (WA1821) is applicable for cleaning hard surfaces (not recommended for cars).

MAINTENANCE

Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance.
Inspect the product for damaged or worn parts before each use. Do not operate it if you ﬁnd damaged or worn parts. Contact your supplier or the manufacturer for replacement parts.

Hose ﬁlter maintenance

Remove the hose ﬁlter from the hose and get out the strainer. Rinse the parts with clean water before reassembling.

Filter screen maintenance

Remove the hose adapter to get the ﬁlter screen.
Rinse it with clean water before reassembling.

Note : When retightening the hose adapter, please tighten securely. Otherwise, it may not draw any water for proper operation.
WARNING : Any other servicing should be performed by an authorized service representative.

CLEANING/STORAGE

Before Storage, completely drain all the water from the machine and hose.
Clean the molded plastic housing of the machine using a soft brush and clean cloth. Do not use water, solvents or polishes. Store in a secure and dry place out of the reach of children. Do not place other objects on the product.
Store the machine and the accessories in a frost free place.

TROUBLESHOOTING

Symptom

| Possible causes|

Solution

---|---|---
Machine turns on but it does not draw any water or there is not sufficient pressure.| Power nozzle is too high from the water source surface.| Lower the machine below 5ft/1.5m.
Hose filter is blocked.| Take out the hose filter and rinse the parts with clean water.
The users garden hose is not well connected to the machine.| Check and reattach the garden hose tightly.
Hose adapter looses. The filter screen is missing.| Tighten the hose adapter securely with a spanner.
Contact Worx service agent to get a filter screen.
Pump, hose, or other parts are frozen due to outside temperatures.| Wait for the pump, hose or other parts to thaw.
Hose kinks.| Straighten out the hose.
Multi-spray nozzle leaks.| The nozzle pattern does not spray correctly.| Make sure the nozzle pattern symbol aligns with the indicator mark on tool.
Fixing nail of the multi-spray nozzle loosens.| Tighten it with a hex key.
Outlet pressure increases suddenly.| Multi-spray nozzle is blocked.| Replace with a new multi-spray nozzle.
Machine drains out water after stopping.| There is water remaining in the lance and pump after stopping.| Drain all the water completely before storage.
Soap accessory cannot spray out any detergent.| Blockage in the soap bottle.| Clean it with fresh water.
Machine does not start.| The battery pack is not attached well.| Reinstall the battery pack.
Battery pack is empty.| Replace with a new battery pack or recharge the battery pack.
Defective battery.| Replace with a new battery pack.
Machine pressure is not consistent.| Additional air could be sucked into the machine.| Check connection between the hose adapter and the hose.
It is at low pressure setting.| No action need.
Machine stops automatically.| Battery pack is empty.| Replace with a new battery pack or recharge the battery pack.
The multi-spray nozzle is blocked. The current protection is activated.| Remove the multi-spray nozzle and turn on the machine. If the machine works normally, replace with a new multi-spray nozzle.