CASE-MATE POWERDISCV1 Power Disc Wireless Charger User Guide

CASE-MATE POWERDISCV1 Power Disc Wireless Charger User Guide

SAFETY AND PRECAUTIONS

Wireless charging may not work efficiently or at all if you have a thick case attached to your device. For best results, remove your case prior to wireless charging. Only use the included wall adapter for ideal charging performance and safety. For indoor use only. Keep charger and power adapter away from humid conditions. Do not place metal or any foreign objects on the wireless charging base. Device and base may get warm during wireless charging. This is normal behavior and both will cool down after the device is charged.

SPECIFICATIONS

• Qi Inductive Coupling Wireless Charging
• Qi EPP Certified 1.2.4
• Dimensions : 3.8in diameter x 0.35in
• Operating Temperature Range: -10C to 60C
• Input Power: DC 5V 2A / 9V 2A (MAX)
• Output Power: lOW (MAX)

OPERATING INSTRUCTIONS

Connect the two ends of the USB power cable to the Power Disc and the wall plug power adapter. Plug the adapter to your wall outlet. Place device to be charged onto the Power Disc in center position.

LED light will indicate charging status as follows:

No device, but powered: Green and Red LED will flash twice for detection of power on, and then the LED will turn off.

Device on pad, charging: Green LED will stay on for 5 seconds then turn off.

Foreign Object Detection, or any error: Red LED will flash rapidly at half- second interval.

Power Setup

Lay Flat Charging

Warranty

Case-Mate offers a 1 Year Warranty on this product. For detailed warranty information, please visit: www.case-mate.com/warranty or by phone at: +1 888-988-5358

FCC STATEMENT

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY

We, Case-Mate Inc., of 7000 Central Parkway, Suite 1050, Atlanta, GA 30328, declare under our sole responsibility that the Power Pad Wireless Charger product, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the that to which the receiver is connected.
• Consult the dealer or an experienced radio /TV technician for help.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this guide. This equipment should be installed and operated with a minimum distance of20 cm between the radiator and your body.

IMPORTANT NOTE:

Industry Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN RSS-216 /CNR-216.

FOR QUESTIONS/HELP CALL:

Phone:   +1 888-988-5358

7000 Central PArkway, Suite 1050 Atlanta, George, 30328

Substrate: 250gsm, C2S

Printing inks/Foils

Finishes

Documents / Resources

| CASE-MATE POWERDISCV1 Power Disc Wireless Charger [pdf] User Guide
POWERDISCV1, 2AAC4-POWERDISCV1, 2AAC4POWERDISCV1, POWERDISCV1 Power Disc Wireless Charger, POWERDISCV1, Power Disc Wireless Charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>