EDIFIER W220T True Wireless Earbuds Headphones User Manual
- June 5, 2024
- Edifier
Table of Contents
EDIFIER W220T True Wireless Earbuds Headphones
Power ON/OFF
- Power ON when the case is opened.
- Power OFF when placed in the case and the case is closed.
Note:
If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically.
Pairing
- Earbuds placed in the case and keep the case open.
- Press and hold the button on the case for about 3s. White and green LEDs will blink alternately.
- Select “EDIFIER W220T” in your device setting to connect. White LED will blink once and then turn off when successfully.
1st Pairing
- Earbuds placed in the case and keep the case open. White and green LEDs will blink alternately.
- Select “EDIFIER W220T” in your device setting to connect. White LED will blink once and then turn off when successfully.
Note：
For subsequent use, the earbuds will automatically connect to the device used
last time.
Reset
- Earbuds placed in the case and keep the case open.
- Press the button on the case 3 times to re-enter left & right connection and clear pairing records, white LED will blink slowly.
- Select “EDIFIER W220T” in your device setting to connect. White and green
LEDs will blink alternately, then white LED will blink once and turn off when successfully.
Dual Connectivity
- Pair device A with the earbuds. Upon success, keep the earbuds in the case and keep the case open, then press and hold the button on the case for about 3S to re-enter the pairing mode.
- Select “EDIFIER W220T” in device B to connect successfully.
- Select “EDIFIER W220T” in device A to connect manually. White LED will blink once and then turn off when successfully
Charging
Charging case
- Please connect the case to power source with the included Type-C charging cable for charging.
- Orange LED is steady lit when charging and off when fully charged.
Note:
Please do not charge the earbuds when there is sweat or other liquids inside
the charging port, which may damage the earbuds.
- Input: 5V 200mA(Earbuds)
- 5V 1A(Charging case)
Controls
Note:
- Easily pinch the debossed area of earbuds stem to select functions.
- Images are for illustrative purposes only and may differ from the actual product.
- Download Edifier Connect App for more customizable control settings.
Model: EDF200089
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from
actual product.
If any difference is found, the actual product prevails.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IC statement:CAN ICES-3(B)/NMB-3(B).
FCC ID: Z9G-EDF184
IC:10004A-EDF184
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>