ABKO E10 True Wireless Stereo Earbuds User Guide

ABKO E10 True Wireless Stereo Earbuds

Quick Gulde

Multi-functional button (MFB) : refers to the multi-functional button on the earbud.

Power On/Off

1. Power on
   Method 1 : Touch MFB for 3 seconds. A “Power On” message is heard as a voice prompt
   Method 2 : Remove the earbud from the charging cradle.

2. Power off
   Method 1 : Touch MFB for 6 seconds. A “Power Off” message Is heard as a
   voice prompt (The message will be heard if you are wearing an ear-bud.)
   Method 2 : Insert the earbud into the charging cradle and close the cover:

Pairing (On First Use)

1. Remove the ear-buds from the charging cradle (For initial use, remove the film from the ear-bud, put it back into the cradle.)
2. The left and right earbuds automatically connect to each other; flash blue quickly, and then red/blue. (About 5 seconds to connect)
3. Select ABKO E10 from the Bluetooth list of the device you are connecting to, such as a smartphone/tablet.

MCSync Support

• This product does not require any additional pairing when using Lord R single, and automatically connects to the mobile phone after the initial pairing has been completed

Initialization method

• Proceed without the earbuds to be connected to any other devices. If you are connected to a mobile phone or a pad, please remove it from the Bluetooth list before proceeding.

• Tum off bath left and right earbuds.

• Touch the MFB of the left and right earbuds at the same time and hold for 10 seconds. (When the earphone is plugged into the ear, a few pairing
  messages are heard, then the power is timed off with two beeps.)

• Put the left and right earbud back into the cradle, dose the cover; then open it again 2 to 3 seconds later.

• Press the find button on the Bluetooth list of your phone or pad, then find andtouchE10.

Operation

Phone call

• Answer / Hang up
  • Receive : Touch the MFB button when you get a call.
  • Hang up : Touch the MFB button during the call.
• Reject Calls
  • Touch and hold the MFB button for 2 seconds when the phone rings.
• Google Assistant/ Apple Siri
  • Touch and hold the MFB for 2 seconds while playing music.
• Music Playback Control
  •  Touch the MFB to play/pause.
  • During playback, touch the MFB on the left earpad twice to move to the previous track.
  • During playback, touch the MFB on the right earpad twice to move to the next track.
• Volume control
  • Set up on the connected smart device.
• Charging and Battery Indicator
  • Earbud
  •  Return the earbud to the charging cradle and close the cover to start charging.
  • It takes about 90 minutes to full change
• Cradle
  • The cradle starts charging when connecting the charging cable to the Type-C connector on the left side of the cradle
  • During charging, the cradle displays the charging phase through an LED Indicator on the front
  •  It takes approximately 3 hours to fully charge the cradle and may different depending on the charging adapter and cable specifications.
• LED Indicator and Cradle Display
  • Earbud
  • POWER ON : The blue LED lights up several times.
  • POWER OFF : The red LED lights up for approximately 1 second.
  • Pairing mode (unconnected) : The red/blue LED on the right earbud is cross-it, the left earbud flashes blue in penitently.
  • Pairing complete status : Blue LED flashes once every 5 seconds.
• Cradle
  •   Cradle Battery Remaining : Number on the cradle display to indicate the remaining battery.
  • Cradle Charge : The number of cradle displays flashes indicating the charging status.
• Battery remaining status
  0-25% 25-50% 50-75% 75-99% 100%
  eooo ••oo •••o •••• ••••
  

Specification

Head Office

M Signature 7th floor, 20, Magokjunpng 1-ro, Gangseo-gu, saoul, Republlc of Korea
{m.:+82-2-749-1311)

China Branch
Rm:Z0:Z, Mei Dong Electronies Building, Tie Shan He Street, San Dong Road,
Hua Shan Town, Hua Du District, Guang Zhou, China
{TEL: +86-:Z0-36969919)

Contact Us
C5_5Upport@abko.co.kr

WARRANTY

All warranty service is provided by our factory service center, or an authorized customer care technician. If you have any inquiry, please visit our website or email us, Please check below information. To schedule your service, please have your serial number and your model number available for service.
Website : https://abkoglobal.com/contact-us/
E-mail: cs_support@abko.co.kr

What ABKO will not cover

• Failure of the product if it is abused, misused, modified, or used for other than the intended purpose or used commercially, Damage to the product caused by accident, fire, folds, any natural disasters or acts of God.
• Damage to finish, such as surface rust, tarnish, or small blemishes not reported within 48 hours of delivery
• Incidental or consequential damage caused by improper use or not following manual,
• Damage caused after delivery. Product not accessible to provide required service.
• Service to repair or replace lights bulbs, except for LED lamp.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home use in the world. If the product is located in an area where service by a ABKO is not available, you may be responsible for a trip charge or you may be required to bring the product to an authorized ABKO service location for service, Some regions/countries do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from country to country. To know what your legal rights are, consult your local region or country consumer affairs office or your Attorney General.

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any impaled warranties, including the implead warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>