Cradlepoint S5A036A Enterprise Branch Router User Manual
- June 5, 2024
- Cradlepoint
Table of Contents
Cradlepoint S5A036A Enterprise Branch Router
OPEN-SOURCE SOFTWARE
This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, BSD License, Net- SNMP License, and PSF License Agreement for Python 3.3. For more information on this software, including licensing terms and your rights to access source code, contact Cradlepoint at Cradlepoint.com/opensource.
HARDWARE WARRANTY INFORMATION
Cradlepoint, Inc. warrants this hardware product against defects in materials
and workmanship to the original purchaser for a period of three (3) years from
the date of shipment. This warranty is limited to a repair or replacement of
the hardware product, at Cradlepoint’s discretion, as purchaser’s sole and
exclusive remedy. If this hardware product was procured as a component of a
NetCloud Solution Package, additional warranty may be available. Please see
Cradlepoint’s website for details. Cradlepoint does not warrant that the
operation of the product will meet your requirements or be error free.
CRADLEPOINT MAKES NO OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED.
CRADLEPOINT SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-
INFRINGEMENT.
LIMITATION OF CRADLEPOINT LIABILITY
The information contained in this Safety, Regulatory, and Warranty Guide is
subject to change without notice and does not represent any commitment on the
part of Cradlepoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY
SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT,
SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES,
INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED
PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT,
EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY
ANY THIRD PARTY. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL THE
AGGREGATE LIABILITY OF CRADLEPOINT AND/OR ITS AFFILIATES ARISING UNDER OR IN
CONNECTION WITH THE PRODUCT, REGARDLESS OF THE NUMBER OF EVENTS, OCCURRENCES,
OR CLAIMS GIVING RISE TO LIABILITY, EXCEED THE PRICE PAID BY THE ORIGINAL
PURCHASER OF THE PRODUCT. THE LIMITATIONS OF LIABILITY SET FORTH HEREIN SHALL
REMAIN IN FULL FORCE AND EFFECT REGARDLESS OF WHETHER THE REMEDIES HEREUNDER
ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE.
PRIVACY
Cradlepoint may collect general data pertaining to the use of Cradlepoint
products via your Internet connection (wired and/or wireless) such as device
ID/serial number, network status, IP address, MAC address, operating system,
browser type and version number, etc., in order to provide you with better
services, enhance user experience, and improve performance.
OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT
By activating or using your E100 or E110 device, you agree to be bound by
Cradlepoint’s Terms of Use, User License and other applicable Legal Policies.
© 2015 Cradlepoint, Inc. All rights reserved. Cradlepoint is not responsible
for omissions or errors in typography or photography. Cradlepoint, E100, E110,
and the Cradlepoint logo are trademarks of Cradlepoint, Inc. in the US and
other countries. Other trademarks are property of their respective owners.
ROUTER COMMUNICATION/DATA USAGE
The factory default configuration of the router is set to communicate with
Cradlepoint and other resources at regular intervals to access the latest
firmware and modem updates, clock synchronization (NTP), and NetCloud Manager
(ECM) membership. Such communication may result in data usage and applicable
charges regardless of whether the router uses a wired or wireless Internet
connection. To avoid such data usage and potential charges, consult the
following Knowledge Base article:
http://knowledgebase.cradlepoint.com/articles/support/router-communication-
data-usage
FCC CAUTION
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC STATEMENT
For product available in the USA/Canada market, only channel 1-11 can be
operated. Selection of other channels is not possible.
Operation on the 5150-5250 MHz WiFi radio is restricted to indoor use only.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body.
This device and its antennas(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with
FCC multi-transmitter product procedures.
To comply with FCC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum cellular antenna gain must not exceed
0.7dBi (663~698MHz), 0.7dBi(688~716MHz),
0.7dBi (777~787MHz), 0.7dBi(788~798 MHz),
0.72dBi(824~849MHz), 1.54dBi(1710~1755), 1.54dBi(1850~1910 MHz). INDUSTRY
CANADA STATEMENT
This device complies with Industry Canada license-exempt RSS standards.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
For product available in the USA/Canada market, only channel 1-11 can be
operated. Selection of other channels is not possible.
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
INDUSTRY CANADA RADIATION EXPOSURE STATEMENT
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body.
These radio transmitters (IC:6921A-S5A036A, 10224A-2018EC25AF) have been
approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
These devices have been designed to operate with cellular antennas having a
maximum gain of 0.7dBi (663~698MHz), 0.7dBi(688~716MHz),
0.7dBi (777~787MHz), 0.7dBi(788~798 MHz),
0.72dBi(824~849MHz), 1.54dBi(1710~1755),
1.54dBi(1850~1910 MHz). Antennas having a higher gain are strictly prohibited
per regulations of Industry Canada. The required antenna impedance is 50 ohms.
EXTERNAL LTE ANTENNA P/N:170801-000
This important Safety, Regulatory, and Warranty Guide contains safety,
handling, disposal, regulatory, trademark, copyright, and software licensing
information.
Read all safety information below and operating instructions before using the
device to avoid injury.
CAUTION : Risk of explosion if the battery is replaced with the incorrect
type.
If the backup battery is installed, use only Getac Branded, and UL Listed
battery, Model: 170848-000.
ATTENTION : Risque d’explosion si la batterie est remplacée par le type
incorrect.
Si la batterie de secours est installée, utilisez uniquement Getac Branded et
la batterie UL Listed, Modèle : 170848-000.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>