SOLT GGSHPD100W 10.0kg Capacity Heat Pump Dryer User Guide
- June 3, 2024
- SOLT
Table of Contents
GGSHPD100W 10.0kg Capacity Heat Pump Dryer
User Guide
GGSHPD100W 10.0kg Capacity Heat Pump Dryer
Heat Pump Dryer 10.0kg Capacity
Quick Start Guide
Tips for Using & Operating Your Heat Pump Dryer Model: GGSHPD100W
MODEL GGSHPD100W
Heat Pump Dryer 10.0kg Capacity
Getting Started…
Please follow these steps before using the dryer
- Check the lint filters are clean and the water tank is empty before every load. Ensure both are replaced correctly before using your dryer.
- Sort and load items into the dryer drum, ensuring no items are in the way of the door. Close the door (you will hear it click shut).
Moving the Dryer
If the dryer needs to be placed at an angle for moving, only angle towards the
right-hand side (when viewed from the front). If the dryer has not been
transported as described, leave it standing upright for at least two hours
before turning it on.
HYGIENE+ Function
This function helps to minimize bacteria from producing within your heat pump
dryer. After selecting your preferred program cycle, press the HYGIENE+ button
to add a sterilizing process to your dry cycle.
Operating the Dryer
- Press `On/Off to activate your dryer.
- Select your desired drying cycle by turning the Program Selection Dial.
- Select your preferred drying options, using the buttons on the right-hand side of the panel (if you wish to select options different from the default options for the cycle).
- Touch the `Start/Pause button to start the cycle.
Anti-Crease Function
This function helps to minimize the creasing of your laundry items. The Anti-
Crease LED shall light when the function is selected. At the end of the drying
cycle, the default anti-crease operation time is 60 minutes but 30 or 90
minutes can be selected. The clothing can be removed during the anti-crease
phase and all other drying programs (excluding: Refresh and Wool).
For more information please call 1300 11 43 57
WWW.SOLT.HOUSE
ESSENTIALS FOR LIFE