BRESSER TR-688V video tripped Instruction Manual

BRESSER TR-688V video tripped

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/warranty_terms

Imprint

Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Ser-vice” in this documentation. We ask for your understanding that unsolicited returns cannot be processed.
Errors and technical changes excepted.
© 2022 Bresser GmbH
All rights reserved.
The reproduction of this documentation – even in extracts – in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union, and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers: F002036
Manual version: 0522
Manual designation:
Manual_F002036_Tripod-TR-688V_en-de_BRESSER_v052022a
Always provide information when requesting service.

About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device. Read the safety instructions and the operating manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

Intended Use

• This device is not intended for use by persons (including children) with impaired physical, sensory or mental abilities, or for lack of experience and/or knowledge, unless they are supervised by or have received instructions from a person responsible for their safety on how to use this device.
• This device is for personal use only.

General safety instructions

Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!

CAUTION Risk of body injury!
This device contains components and/or accessories that can cause minor or serious body injury if used improperly. It is therefore essential that you observe the following safety information in order to prevent body injuries.

NOTICE Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information. Fragment to poorly anchored accessories – danger of falling down

• Do not disassemble the device! In the event of a defect, please contact the after sales support number listed below.

6 Parts overview and scope of delivery 

Illustration 1:

All parts of the tripod

1. Tripod head
2. Tripod head plate with ¼” DIN photo thread
3. Locking lever (tripod head plate)
4. Fixing screw (tripod head tilt 90°)
5. Guiding handle and fixation (vertical movement)
6. Height-adjustable tripod centre rod (can be extended/retracted via (9))
7. Fixing screw (horizontal movement)
8. Spirit level
9. Crank (height adjustment)
10. Locking ring (height adjustment)
11. Circular level
12. Transport handle
13. Locking ring (tripod spider)
14. Tripod spider (strut)
15. Clamping lever (tripod leg at top)
16. Accessory hook
17. Clamping lever (tripod leg below)
18. Movable rubber foot
19. Transport bag

Scope of delivery:
Tripod (A), quick-release plate (B), carrying bag (C)

Setting up the tripod

1. Loosen the locking ring for the tripod bridge.
2. Pull out the tripod legs slowly until the tripod bridge is opend completely.
3. Tighten the locking ring for the tripod bridge by hand.
4. Open the clamping lever for the tripod legs.
5. Pull out the tripod legs to the desired height. Make sure that the bubble of the circular level is in the middle of the circle to ensure a horizontal plane stand.
6. Close the clamping lever for the tripod legs.
7. Loosen the locking ring for the height adjustment.
8. Pull out the tripod head to the desired height by using the crank handle.
9. Tighten the locking ring for the height adjustment by hand.

Moving the tripod head

NOTICE

Tighten locking screws/rings only by hand.
Tighten locking screws/rings only by hand. Rings and threads can break when overtighten them!

1. Loosen the fixing screw for horizontal movement to move the tripod head to the right or to the left.
2. Tighten the fixing screw by hand to set the tripod in current horizontal position.
3. Loosen the fixation for vertical movement by turning the handle counterclockwise. Tilt the tripod head up and down.
4. Turn the handle clockwise to to set the tripod head in current vertical position.
5. Loosen the fixing screw for the tripod tilt plate to tilt the the attached optics sidewards for a viewing position up to 90 degrees.
6. Tilt the tilt plate to the right and tighten the fixing screw by hand to set the tilt plate in current position.

Mounting the accessory/attachment on the tripod

NOTICE Secure accessories during assembly
Always secure the attachment to be mounted (camera, spotting scope, etc.) with one hand during mounting until it is firmly mounted! Falling down can cause irreparable damage to the attachment.

1. Push the locking lever on the tripod head to the FREE position and simultaneously remove the tripod head plate from the holder.
2. Screw the threaded screw of the tripod head plate into the thread of the mounting base of the optical tube to fix the tripod head plate to the optical tube. Make sure that the fixing pin engages in the corresponding hole.
3. Push the locking lever on the tripod head to the FREE position and insert the optical tube with the mounted tripod head plate into the holder. Make sure that the objective lens points in the opposite direction to the guiding handle.
4. Push the locking lever into the LOCK position.

Disposal

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal. Please take the current legal regulations into account when disposing of the device! Get more information on the proper disposal from the local waste disposal service or environmental authority.

Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

Bresser GmbH Gutenbergstraße 2 46414 Rhede · Germany
www.bresser.de 

References

• disponibles.IT
• konsoleH :: Login
• Bresser | Startseite | Expand Your Horizon mit BRESSER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>