TrickleStar Plug In Energy Monitor User Guide
- June 3, 2024
- TrickleStar
Table of Contents
TrickleStar Plug In Energy Monitor User Guide
Introduction
The Energy Monitor helps you understand how much power your appliances use. Once you understand this you can take steps to reduce your energy consumption — after all, it’s difficult to manage what you can’t measure!
The Energy Monitor also includes surge protection to ensure your appliance is
protected against surges and voltage spikes whilst being measured.
Installation / Energy Monitor Configuration Setup
Install Energy Monitor
The Energy Monitor tracks power consumption of individual home appliances.
- Plug in the Energy Monitor to a powered AC outlet
- Plug in an appliance into the Energy Monitor
Perform Energy Monitor Configuration Setup
The Energy Monitor is preset with a default rate ($0.12/ KWH) and carbon
emission value (0.49Kg/KWH). Both of these values can be changed.
Electricity Rate
Press the COST button for 5 seconds to enter the electricity rate setup page.
- The default rate is $0.12 per KWH. Press (COST) or (ENERGY) to adjust the electricity rate.
- Press (CO2) to confirm and exit the setup page.
Carbon Emission Value
Carbon dioxide is emitted when producing electricity by burning coal & fossil
fuel. This is referred to as a CO2 footprint or carbon emission. The average
carbon emission rate is 0.49Kg of carbon emission for every 1 KWH of
electricity produced. This value be changed depending upon your local electric
utility and power source. Please contact your local utility for their carbon
emission rate.
Press the CO2 button for 5 seconds to enter the carbon emission rate setup page.
- The default carbon emission rate is 0.49Kg per KWH. Press (COST) or (ENERGY) to adjust the electricity rate.
- Press (CO2 button) to confirm and exit the setup page.
Modes
There are 4 different modes:
- Energy Mode
- Cost Mode
- CO2 Mode
- Energy Count Mode
Energy Mode In Energy
Mode, press ENERGY button to switch to different display of energy
information. The Energy Monitor can display power consumption of an appliance
in real time / day / month / year estimates.
Note: The Energy Monitor reads your appliance’s energy usage continuously while your appliance is on and off, and calculates the estimated energy information based on real time and historical measurements. We recommend you leave the Energy Monitor measuring an appliance for several use cycles, to obtain a more accurate estimate.
Energy Mode
Real Time Energy Consumption
Displays real time energy consumption of the appliance in Watts.
Daily Estimated Power Consumption
Displays the daily energy consumption (KWH) of the appliance based on real
time and historical measurements.
Monthly Estimated Power Consumption
Displays the monthly energy consumption (KWH) of the appliance based on
real time and historical measurements.
Yearly Estimated Power Consumption
Displays the yearly energy consumption (KWH) of the appliance based on real
time and historical measurements.
Cost Mode
In Cost Mode, press COST to switch between different energy cost displays. The
Energy Monitor can display real time / day / month / year estimates.
Real Time Cost
Displays the real time cost of the appliance in dollar/hr.
Daily Cost
Displays the estimated daily cost of the appliance based on real time and
historical measurements.
Monthly Cost
Displays the estimated monthly cost of the plug-in appliance based on real
time and historical measurements.
Yearly Cost
Displays the estimated yearly cost of the plug-in appliance based on real
time and historical measurements.
CO2 Mode
In CO2 mode, press CO2 to switch to display of carbon emission data. The
Energy Monitor can display carbon emission of the plug-in appliance in real
time / daily / monthly / yearly estimates modes.
Real Time CO2 Emission
The Energy Monitor displays the real time CO2 value of the plug-in appliance
in Watt.
Daily CO2 Emission
The Energy Monitor estimates the daily CO2 value of the plug-in appliance
based on real time and historical measurements.
Monthly CO2 Emission
The Energy Monitor estimates the monthly CO2 value of the plug-in appliance
based on real time and historical measurements.
CO2 Emission
The Energy Monitor estimates the yearly CO2 value of the plug-in appliance
based on real time and historical measurements.
Energy Count Mode
Energy Count offers an easy way to find out how much total energy consumption
or energy cost each time you use an appliance.
Real Time Energy Cost
The energy monitor displays the real time energy cost of the plug-in
appliance in dollar/hr
Daily Estimated Energy Cost
The energy monitor estimates the daily energy cost (dollar) of the plug-in
appliance base on real time and historical measurements.
Monthly Estimated Energy Cost
The energy monitor estimates the monthly energy cost (dollar) of the plug-
in applia
nce base on real time and historical measurements.
Annually Estimated Energy Cost
The energy monitor estimates the annually energy cost (dollar) of the plug-
in appliance base on real time and historical measurements.
Product Warranty
TrickleStar warrants to the original purchaser of the TrickleStar Product for
1 year, that the Product shall be free of defects in design, assembly,
material, or workmanship, and will repair or replace, at its option, any
defective product free of charge. Email a warranty claim to us at
[email protected]
Be prepared to provide the following information:
- Product part number of the product.
- The date of the occurrence.
- Where and when you purchased the product.
- A copy of original receipt.
A Customer Service Representative will then instruct you on how to forward your product and receipt and how to proceed with your claim.
Copyright and Disclaimer
© Copyright TrickleStar Ltd.
All rights reserved.
TrickleStar® is a registered trademark of TrickleStar Ltd. All other
trademarks are the property of their respective owners.
Disclaimer: TrickleStar reserves the right to change specifications or designs described in this manual without notice and without obligation. Any typographical, clerical or other error or omission in this document or other documents or information issued by TrickleStar shall be subject to correction without any liability on the part of TrickleStar without notice.
FOR TECHNICAL SUPPORT
Toll free : 1-888-700-1098
http://www.tricklestar.com/support