TrickleStar TS2602 Advanced Keyboard User Guide
- June 5, 2024
- TrickleStar
Table of Contents
TrickleStar TS2602 Advanced Keyboard
Setting up the Advanced Keyboard
- Flip the keyboard over to reveal the settings compartment.
- Remove the cover plate to access the selector switches
- Configure the countdown timer to your desired countdown duration accordingly:
- Position “1” – 30 seconds
- Position “2” – 3 minutes
- Position “3” – 6 minutes
- Configure the Operating System of your computer/laptop, whether is it PC (for Windows/Linux) or Mac
- Slide the cover plate back over the settings compartment. It should snap in place securely.
- Keep the adjustable feet folded in, or you could fold out both feet for a slanted typing angle.
- Plug in the USB Type-C connector to your computer/laptop. If your computer/laptop only has USB Type-A ports, please use the USB Type-C to Type-A adapter.
- Follow the steps outlined in the configuration wizard for first time connection to your computer/laptop:
- For Windows and Linux computer/laptop – no configuration needed
- For Mac computer/laptop:
- The Keyboard Setup Assistant window will be shown. Click “Continue” to proceed.
- Identify the left “Shift” key, and press the “z” key to the right of it.
- Identify the right “Shift” key, and press the “/” key to the left of it.
- Ensure that your Mac detected the keyboard as “ANSI” layout, otherwise please select “ANSI” as the correct layout. Click “Done” to close the window
- The Sleep LED indicator underneath the Power Button should light up in green. You may press the Power Button to put the computer/laptop to sleep.
- Pressing the Power Button or any other keys will wake up the computer/laptop from sleep.
Note:
- It is not recommended that you use this keyboard with any wrist rests as it may interfere with the radar sensor operation.
- If you absolutely must use one, choose foam-type wrist rest, but this may sacrifice some detection range.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>