Nanit N301 Pro HD Nursery Camera User Guide
- June 9, 2024
- nanit
Table of Contents
Nanit N301 Pro HD Nursery Camera
Product Information
The product is a Flex Stand Support Flex that comes with a Power Adapter. It
is designed for indoor use only. The Power Adapter has an input voltage of
100-240V, input AC frequency of 50-60Hz, output voltage of 5V, output current
of 2.1A, and output power of 10.5W.
The average active efficiency is 83.65%, efficiency at 10% load is 80.60%, and
no-load power consumption is 0.0033W. The equipment should be installed and
operated with a minimum distance of 20 cm between the camera and the human
body.
What’s In The Box
Safety WARNING
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (0.9m) away). This product cannot replace adult supervision. Ensure your child’s health by checking on him/her regularly. This device is designed for indoor use only. This product and its packaging are not toys. Do not allow children to play with them. Use only the AC power supply included with your Nanit.
Product Usage Instructions
To start using the product, download the Nanit app and set up your account.
Follow the in-app instructions to pair your Nanit Camera.
Once complete, you can choose to follow the mounting instructions in-app or in
the user manual. WARNING: Keep the cord out of the reach of children (more
than 3ft (0.9m) away). This product cannot replace adult supervision. Ensure
your child’s health by checking on him/her regularly. This product and its
packaging are not toys. Do not allow children to play with them. Use only the
AC power supply included with your Nanit.
ATTENTION: The product is meant for indoor use only. For full compliance information, visit nanit.com/legal/compliance. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Download the Nanit app and set up your account.
Follow the in-app instructions to pair your Nanit Camera.
Once complete, you can choose to follow the mounting instructions in-app or in
this booklet.
Instructions
- Snap the camera onto the Flex-Stand
- Plug your Flex-Stand into the wall
- To remove, gently pull the camera from the stand
Compliance
For full compliance information visit: nanit.com/legal/compliance
EU DECLARATION OF CONFORMITY
Hereby, UdiSense, Inc. (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York,
NY 10001, declares that the radio equipment Models N301 & N302 are in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity, including device frequency
bands and maximum radio-frequency power, is available at the following
internet address: https://www.nanit.com/legal/compliance
POWER SUPPLY INFORMATION
Input Voltage| Input AC frequency| Output Voltage| Output Current| Output
Power| Average active efficiency| Efficiency at 10% load| No load power
consumption
---|---|---|---|---|---|---|---
100-240V| 50-60Hz| 5V| 2 .1A| 10 .5W| 83 .65%| 80 .60%| 0 .0033W
Watch an install video before trying it yourself:
nanit.com/install
Limited Warranty: nanit.com/legal/warranty