LANCOM GS-3152P Fully Managed Access Switches User Guide
- June 5, 2024
- LANCOM
Table of Contents
LANCOM GS-3152P Fully Managed Access Switches
PRODUCT OVERVIEW
-
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch. -
TP Ethernet interfaces 10M / 100M / 1G PoE+
Use Ethernet cables to connect the interfaces 1 to 36 to your PC or a LAN switch. -
TP Ethernet interfaces 10M / 100M 1G
Use Ethernet cables to connect the interfaces 37 to 48 to your PC or a LAN switch. -
SFP interfaces 1G
Insert suitable LANCOM SFP modules into the SFP inter faces 49 to 52. Choose cables which are compatible with the SFP modules and connect them as described in the module’s documen tation. -
Power connector (device back side)
Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord.
Please observe the following when setting up the device
- The mains plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads.
- Do not rest any objects on top of the device and do not stack multiple devices.
- Keep all ventilation slots of the device clear of obstruction.
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
- If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250.
- A Please note that support for third-party accessories (SFP and DAC) is not provided.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>