EDIFIER G4S Wireless Gaming Headset Instruction Manual
- June 5, 2024
- Edifier
Table of Contents
EDIFIER G4S Wireless Gaming Headset Instruction Manual
Product description and accessories
- Headset status indicator
- Power on/off button
- Microphone indicator
- Microphone mute/unmute
- Volume control
- Type-C charging port
- Bluetooth/Bluetooth
- Flash Speed 2.4G
- Microphone
-
Multi-function adapter
-
Charging cable
-
Microphone
-
User manual
Note:
- Images are for illustrative purposes only and may differ from the actual product.
- For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.
- The headset and adapter are factory-bound as a pair, please keep them carefully. If lost, you need to return the headset or adapter to us for upgrade binding.
Connection mode
Bluetooth
When the headset is powered off, press and hold the ” G ” button for 5
seconds.
Select “HECATE G4 S” in your device setting to connect.
Bluetooth FLash Speed 2.4G Wireless
Insert the adapter, the headset switch to bluetooth flash speed 2.4G wireless
mode and automatically connect successfully.
\
Insert the adapter into a Type-C device
Controls
it is enabled by default when the headset is turned on, and effective in the conversations.
Reset (use with caution)
When the headset is powered off, press and hold the ” G ” button for 10 seconds until the red light flashes rapidly and off, then the factory settings have been restored.
FCC STATEMENT
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. IC statement:CAN
ICES-003(B)/NMB-003(B).
Declaration for EU
Frequency Band: 2.402GHz – 2.480GHzRF
Power Output: ≤13 dBm (EIRP)
There is no restriction of use.
Input: 5V-500mA
For Multi-function adapter
The minimum operating distance from the human body is 0mm, and the maximum SAR
value is 0.285W/kg.
For Ultra-low Latency Dual Mode Wireless Gaming Headset
The minimum operating distance from the human body is 0mm, and the maximum SAR
value is 0.057W/kg.
FCC Regulatory Compliance
Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
This device may not cause interference.
Contact Us
For more information, please visit our website:
Model: EDF700026
FCC ID: Z9G-EDF174
IC: 10004A-EDF174
Adapter Model: EDF700027
FCC ID: Z9G-EDF175
IC: 10004A-EDF175
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2022 Edifier International Limited. All rights reserved.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO.,LTD.
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.
Hereby, Edifier International Limited declares that the radio equipment type EDF700026/EDF700027 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>