Mini Kong Undermount Kitchen Sink Instruction Manual

Mini Kong Undermount Kitchen Sink Instruction Manual

Mini Kong

Undermount Kitchen sink

• Premium gra1de handmade sink
• ’16 gauge, Stainl,ess Steel 304
• Vertical angle, corner/R10 rad,ius c·oved cor,ner
• IBest~in … breed sound an,d thermal insulat~on
• L~m1ited lifetime warran1ty

ln Accordance ·with lnd·ustry Codes & ,Sta,ndards fo-r US,A & Canada

Caution

Due to the weight and sharp edges of the sink, exercise caution when handling, moving or lifting the box or the sink. Use safety gloves and protective gear for eyes and ears. Get assistance when lifting or mounting the sink at any time during the installation procedure.DO NOT attempt to handle or install this product if doing so post a risk of bodily injury or you are medically unfit to carry out the installation.
IMPORTANT: Mini Kong strongly recommends that this product be installed by a licensed plumber. Ensure that
installation complies with applicable plumbing and building codes.

TOOLS

Safety glasses / maker / silicone adhesive sealant/ tape measure / Jigsaw / rags / wood braces / level / screws / bladed screwdriver

3 Ty-pas of Under Mount Sin1k installation

Step 1

Position Cutout Template and Trace It with Pencil.
Check the cut-out template against the actual sink to ensure a proper sized cut-out, then Place the cut-out template in the desired location on the countertop

Mini Kong

Step 21 : Cut the opening in the countertop by carefully following the traced line. PIs use the appropriate saw that best fits your countertop material.

Step 3

Drill Hole in Countertop. Turn the countertop over and drill 3/8″ diameter x 1/2″
deep hole in the countertop, mounting holes should be 1/2″ from edge of sink. Insert anchors into drilled holes and lightly tap with a hammer until flush.

Step 3

Drill Hole in Countertop. Turn the countertop over and drill 3/8″ diameter x 1/2″
deep hole in the countertop, mounting holes should be 1/2″ from edge of sink. Insert anchors into drilled holes and lightly tap with a hammer until flush.

Step 5:

Attach Mounting Hardware to Secure Bowl. Remove excess sealant from inside lip. Allow sealant to set for 30 – 60 minutes.

Step 6: Install Plumbing Fixtures.

• Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instruction. • Run water into sink and check for leaks.

MAINTENANCE INSTRUCTIONS

FAQs

1. Why is there rust in my new kitchen sink?

Reasons:

1.1 The rust may be caused by the welding cement, or oil residue on the sink which when not cleaned on time can lead the sink to rust.
1.2 Chemical cleaning agent, paint, sauces or *king oil left in the kitchen sink after a certain period of time these will create molds and the molds would stick on the surface.

Prevention and Treatments:

1.1 Install the sink after everything else is done, and clean your sink right after installation.
1.2 Clean your sink after every use.
1.3 Properly remove the rust and molds using a scouring pad

2. What will scratch or harm the sink?

Reasons: Improper packaging can lead to scratch marks. The accessories may scratch the sinks during transit.
Mini Kong will try our best to pack the sinks well which would avoid the scratches. But the sink is easily scratched by sharp objects.

Prevention and Treatments:

1.1 Minor scratch: You can use a sponge with toothpaste to polish it again and again.
1.2 Moderate scratch: Using a scouring pad to polish small areas.
1.3 Serious scratch: Purchase stainless steel polisher.

3. What cause the hard water stains?

Reasons: This is normal if you use the sink after a certain period of time.
Prevention and Treatments: 1.1.Scouring powder can easily solve the problem. 1.2.Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some washer-fluid is advisable Remember wipe it dry at last.

DO

1. Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some wash-er-fluid is advisa Remember to wipe it dry.
2. Remember to rinse the sink after using any cleaning agent and wipe dry. If any mineral deposits built the sink, clean up it as soon as possible.
3. Properly remove the rust, molds or scratches with a scouring pad. Rubbing the sink in the direction of grain.
4. Rub it lightly with a soft towel in the direction of grain lines.
5. Keep the sink dry after you use it. Because any standing water can cause a buildup of mineral deposit, which will become hard water stains.

DO_NO_T

1. Leave water spots, utensils or steel cool-ware in the sink for a long time, which would become rust spots in your sink surface.
2. Leave cleaning agents or bleach sitting in your sink for a long period of time which may cause the sink to discolor or damage the surface.
3. Use a steel wool or scouring pad rubbing against the direction of the grain.
4. Leave rubber mats, cleaning pads or sponges in the sink for a long time as this may ruin the finish of your sink.
5. Use the inside of the sink as cutting surface.

How to use scouring pad correctly?

1. Get a dry and clean non- scratch scrub pad.
2.  Scrub the rust off according to the direction of the grain.

STAINLESS STEEL KITCHEN SINKS

General Recommendations:

• Check all the matching products inside when opening the package.
• Inspect your sink for any noticeable damage before installation.
• Read the installation and maintenance instruction thoroughly before installation.
• Consult your cabinet dealer before custom order cabinet for the sink.
• Mini Kong suggests using experienced and professional installers.
• Mini Kong does not responsible for any damage to countertop, sink fixture, faucet and personal injury during installation.

SERVICE AND SUPPORT

Mini Kong carries out the quality standard refining on every detail, and its ingenious modelling and exquisite craftsmanship make the sink present an artwork-like sense of reality, revealing a “delicate” and “natural” beauty within an inch. Its user-friendly design, advanced drainage system and unique antibacterial technique solve the trouble in kitchen life completely. Moreover, the nanotechnology series of sink featuring high tempera resistance, shock resistance and oil resistance combines tradition and innovation perfectly, so as to provide you with extraordinary and elegant living experience.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>