KAN-therm Mini MAP115MLKAN Handoperated Battery Driven Crimping Tool User Manual
- June 6, 2024
- KAN-therm Mini
Table of Contents
KAN-therm Mini
MAP115MLKAN
1936055008
Serialnumber
HE.19533_B © 02/2021 R&D-2
KAN Sp. z o.o. • 16-001 Bialystok-Kleosin • ul. Zdrojowa 51
1 2
1
Auf dem Knapp 46
D-42855
Remscheid
2 304711
XN
142
batch# e.g. 304711
datecode e.g. X = 2027; N = Januar
consecutive# e.g. ,,142″ = tool # 142
datecode
Year
| Code| Month| Code| Month|
Code
---|---|---|---|---|---
2022|
R
| Jan.| N| July|
V
2023|
S
| Feb.| P| Aug.|
W
2024|
T
| Mar.| Q| Sept.|
X
2025|
V
| Apr.| R| Oct.|
Y
2026|
W
| May| S| Nov.|
Z
2027|
X
| June| T| Dec.|
1
WARNING
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Applications
Stainless steel, steel| max. 22 mm
(28 mm upon request)
Copper, copper alloys| max. 28 mm
Multi-layer composite pipe| max. 32 mm
PEX pipe| max. 32 mm
- These values are system-related
Please contact your system supplier for binding information
LGML1
- RAML1 40 min.
- 230V ~50-60Hz
- 10,8V
LGML1
1.
2.
1 | Charger is charging |
---|---|
2 | Battery is fully charged |
3 | Battery is defect |
4 | Battery is too hot or too cold |
5 | Charger is connected with the mains socket and ready to charge. |
6 | Charger is defect |
**Attention (1. + 2.) |
** Please remove the Battery out of the charging slot if the charger is not plugged into the socket. Failing to do so might results in destroying the battery by deep discharge!
| When| Why
---|---|---
20 sec
| after working cycle|
2 x
| after inserting the battery| Self check
20 sec/2Hz
| after working cycle|
20 sec/5Hz
| while exceeding the temp. limit| Unit too hot
20 sec
20 sec/2Hz
| after working cycle|
Handoperated battery driven crimping tool type MAP115MLKAN
CE-´15 – Declaration of conformity. We declare under our sole responsibility
that this product is in conformity with the following standards or normative
documents:
EN 62841-1, EN ISO 12100, EN ISO 13857, EN 28662-1, EN 61000-6-3, EN
61000-6-2, EN 1037 in accordance with the regulations of directives
2006/42/EU, 2014/30/EU, 2011/65/EU
Remscheid, den 05.03.2015
Dipl.-Ing. Joh.-Christoph Schütz, CE-Beauftragter
Gustav Klauke GmbH • Auf dem Knapp 46 • D-42855 Remscheid • Telefon +49 2191 907 0 • www.klauke.com
Abb. ähnlich / pic. similar
HE.19533_B © 02/2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>