globe 50277 3-Way Smart Switch User Manual
- June 5, 2024
- globe
Table of Contents
globe 50277 3-Way Smart Switch
FEATURES
- Back wiring for easier installation
- Perfect replacement for a standard on/off switch, 125VAC
- 2 location light control
- Manually or remotely control installed incandescent, CFL, and LED light fixtures
- with the Globe SuiteTM app
- Pair with Google Home or Amazon Alexa (sold separately) to control your light
- fixtures through voice commands
- Schedule lights to turn on/off at desired times
WHAT’S IN THE BOX
SPECIFICATIONS
- Protocol: 1EEE 802.11b/g/n
- Wireless Type: 2.4GHz
- Maximum resistive load: 15AA
- Incandescent: 5A
- 3 way compatible
- Neutral wire required
- Voltage: 125VAC, 60Hz
TOOLS REQUIRED
FOR YOUR SAFETY
Most electrical accidents are caused by carelessness or ignorance. If you combine basic knowledge of electricity, a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs. Here are some basic guidelines for working with electricity: Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work. .Before touching any wire, use a voltage tester to make sure it’s not live. Whenever you check for voltage ina the receptacle, check both outlets – each may be controlled by a separate wiring circuit. To protect children, place safety covers over any unused outlets. Always work with enough light to see what you are doing; it’s easy to make mistakes when you’re working in dim light.
WIRING DIAGRAM
Caution
- Make sure that the power at the circuit breaker is off before wiring
- Not compatible with Smart single-pole, only with a 3-way switch
- A neutral wire is required. Confirm the wall box contains a Neutral wire (typically white)
- The wire colors indicated in this manual are the common colors and may differ in some homes. Please contact an electrician if you have different wire colors.
- Ensure the wire conductors are securely fastened to each wire
Installation
- This device is to be installed into a wall box. A standard wall box measures3″ height x2″ wide x 25″ deep or 12.5 cu-in. For retrofit applications. Remove the existing wall plate and screws from the wall after having turned off the power at the circuit breaker and testing the outlet with a voltage tester
- Remove the existing switch from the wall and label the wires with the appropriate stickers included in the box.
- Disconnect the wiring from the old switch.
- Line/Load should be a black wire, please use a voltage tester to verity the power.
- Connect the 3-way smart switch (model 50277) to the existing wiring (See “Wiring Diagram”)
- Wiring: Connect the wires from your dimmer with the appropriate wire in the house
- Green wire “Ground” to “Ground”
- Red wire “Traveler 1 ” to “Line Switched the wire coming from the light fixture”
- Red wire “Traveler 2” to “Traveler coming from the non-smart SWitch
- Black wire “Line/lLoad” to ” the common wire from the non-smart Switch and the line from the power source” e. White wire “Neutral” to “Neutral
- Ensure the included wire nuts are securely fastened to each wire.
- Insert the new switch into the wal. Cover with the wall plate and Screws provided.
- Restore power at the circuit breaker. Installation is complete.
Indicator Light Status
| |
---|---|---
White
| Dimmed| Power OFF
ON| Power ON
White
|
Blinking quickly
|
Ready for default configuration mode (easy mode)
Blinking slowly
| Ready for AP (Access Point) configuration mode
CONNECTING INSTRUCTIONS
-
Let’s get started!
Download the Globe SuiteTM app from the App Store or Google Play to your mobile device. Launch the Globe Suite app. To register, enter your email address. Create a password, then login to the app. OR Login if you already have an account. -
Verify your network
Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel. Consult your router documentation for detailed instructions on how to change wireless settings. Add a device -
Power on your smart switch.
Select the “*” symbol on the top right-hand corner. Select your product type and follow the instructions within the apPp .If the connection fails, try using AP mode.
Did you know?
Most modern routers are dual-band meaning they support both 2.4 GHz and 5 GHz
channels. The most common wireless options are Mixed: The router will
broadcast both 2.4 GHz and 5 GHz simultaneously under the same SSID. The
device will choose which to connect to based on multiple variables
(congestion, distance to router etc.).
- 2.4 GHz: Broadcast only on this channel
- 5 GHz: Broadcast only on this channel.
- Dual 2.4 and 5 GHz using Separate SSIDS: Router will broadcast both channels and user manually decides which to connect to.
TROUBLESHOOTING GUIDE
| |
---|---|---
Unable to turn the switch on/off manually
| Incorrect wiring| Make sure the switch is wired correctly
No electricity| Check the circuit breaker; make sure that the power is
restored to the switch
The light bulb is broken or is not compatible| Replace the bulb with a
compatible light bulb
The switch won’t respond to APP control
|
Network delays or is disconnected
| Check your network connectivity
Permission is denied by your phone| Grant permission on our phone settings
The switch is out of order| Manually switch on to check the switch
Your light bulb is blinking when switched off| Electric leakage occurs or the
light bulb and the switch are not compatible| Rewire or replace the light bulb
The switch can’t connect to the app
|
Enter wrong Wi-Fi password
| Enter correct Wi-Fi password
Weak Wi-Fi signal| Check Wi-Fi signal
Unable to connect to Wi-Fi| Confirm your home Wi-Fi is 4G network
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>