HOTT S528/S057 Bluetooth Speaker User Manual
- June 3, 2024
- HOTT
Table of Contents
S528/S057 Bluetooth Speaker
User Manual
PRODUCT OVERVIEW
Buttons :
- Power button
- Next/Volume up button
- Microphone
- Phone button
- Play/Pause button
- Previous/Volume down button
- DC 5V USB Charging port DC5V
OPERATING THE SPEAKER
Turn ON / OFF the Speaker
Hold down the button until you hear a “Beep” sound indicating that it is
turned on. Hold down the again until you hear a “Beep” sound indicating that
it is turned off.
Bluetooth Connection
- Turn on the Bluetooth speaker. The blue indicator light will start to flash rapidly.
- Enable Bluetooth on your mobile device.
- Search for the Device name”HOTT” and connect to it.
- When connected a “Beep” sound will play and the LED indicator light will be on steadily to indicate that a Bluetooth device is connected. You are now ready to stream your favorite music to the speaker and receive phone calls.
Note: After your device is paired with the speaker the first time it will
automatically connect with it when the speaker is turned on the next time.
Please note that Bluetooth must be enabled on your mobile device and within
range to automatically connect to the speaker.
Music Playback
When connected to the Bluetooth speaker, you are able to play/pause music,
skip tracks,s and adjust the volume.
-To Play/Pause music click on the button on the speaker. When no music is playing the LED indicator light will be on steadily. When the speaker is playing music the LED indicator light will flash slowly.
-To skip track click on them to skip to the previous or next track
-To adjust the volume hold down the button to adjust the volume. When the volume is at max a “Beep” sound will be played.
Using the Speaker as a Hands-free Bluetooth Speaker Phone
When your mobile device is paired with the speaker and if there is an incoming
or outgoing call, the speaker will shift from music mode to call mode
automatically. In case of an incoming call, press on the button to pick up the
call. After completing the call, press this button again to hang up. The music
will automatically resume after the call has ended.
Charging
The speaker has a built-in rechargeable battery. Connect the provided USB
cable to a computer or to a DC 5V power adaptor to charge. When the speaker is
charging the LED indicator light will be red. When the speaker is fully
charged, the red LED will turn off. Unplug the Speaker from the power device
once the speaker is fully charged.
Note: The charging time is approx. 3 hours. The battery playing time
varies depending on the volume.
Shower & suction functions
This unit is IPX4 certified, which means you can enjoy music & phone calls in
wet areas. The speaker’s suction cup can stick to any smooth surface.
Note: Please do NOT submerge the unit into the water, as this will ruin
the speaker.
SPECIFICATIONS
-Bluetooth Name: “HOTT”
-Bluetooth: V4.2
-Transmission distance up to 10M (this may vary according to the environment and connected Bluetooth device)
-Output power: 3W
-Built-in rechargeable 400mAh Lithium battery
-Playing time up to 3 hours
-Talk time up to 5 hours
-Charging time up to 1-3 hours
-Built-in microphone
-Call pick up/hang up function
-IPX4 waterproof level
-Micro USB charging port
-Charging input: DC 5V 500mA
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirement. The
device can be used in portable exposure conditions without restriction
FCC ID: YB2-S528
Documents / Resources
| HOTT
S528/S057 Bluetooth
Speaker
[pdf] User Manual
S528, YB2-S528, YB2S528, S528 S057 Bluetooth Speaker, S528 Bluetooth Speaker,
S057, S057 Bluetooth Speaker, Bluetooth Speaker, Speaker
---|---