HOTT H101 True Wireless Earbuds User Manual
- June 4, 2024
- HOTT
Table of Contents
HOTT H101 True Wireless Earbuds
Packing List
PRODUCT INTRODUCTION
- Except for the operation methods specifically marked in the manual ,please do not try to disassemble or replace any parts in the earbuds.
- Don’ t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
- If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
- Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electric shock.
- Do not put the product near by the heat source or expose it to the fire source directly.
- Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.
Product specification
- Bluetooth range:10M
- Earbuds battery capacity: 30 mAh
- Duration: about 4 hours (headset)
- Charging time: about 1 hour (headset)
- Rated input: 5V 30mA
Charging box specifications
- Battery capacity: 320mAh
- Charging time: about 1.5 hours
- Rated input: 5V 320mA
(All technical information is subject to actual performance)
Charge the charging box
Connect the charging box to the 5V power adapter with the Type-C charging
cable
(Reminder: Open or close the charging box, if the red light breathing
effect appears, please timely Charge the charging box.)
Rated input: 5V 30mA(headset) 5V=300mA(charging case)
LED Indicator Status
Product Operation Instructions
-
Boot
Method 1: Open the cover of the charging box and start the headset automatically; -
2 to turn it off
Mode 1: Put the earphone back into the charging box and automatically shut down; Mode 2: When the device is not connected to the smart device, the earphone will shut down automatically after 3 minutes -
3 pairs
Method 1: After the earphone is taken out of the charging box, the left and right earphones will start up and pair automatically.
Two: Open the Bluetooth list of smart devices, search for ” H101 ” and Connection (Support for single ear use).
Pairing status: Voice prompt: “Du”
Pairing successful: Voice prompt: “Du”
The operation of the touch button
Music Play Mode
LR Left/right headset operation
Volume set
LR Left/right headset operation 
Call mode
Left/right headset operation
Voice assistant
In addition to the call state, about three press the headphone touch button to
activate the voice assistant function(Support of connected smart devices is
required) 
THE NAME AND CONTENT OF HARMFUL SUBSTANCES IN THE EARBUDS
WARRANTY STATEMENT
Disclaimer
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice
Warranty statement:
The product attached to this document is guaranteed as follows: lf the product
is twelve (12) months from the date of purchase( Warranty Period ),under
normal conditions of use due to quality defects damaged, can be repaired. Free
repair; free replacement if the manufacturer confirms that it cannot be
repaired; repaired or replaced product. Continue to enjoy the warranty during
the remaining warranty period (the shortest not less than 30 days). Purchased
by sale the ticket date shall prevail; if the purchase date cannot be
determined, the warranty period shall be 13 (13) Monthly calculation.
If you apply Tor a warranty ,please call the product service hotline first and execute it in the manner instructed by us When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice. The above guarantee does not apply to the following situations:
- Exceeding the validity period of the three packs;
- Altering the warranty card and product code does not match the product body;
- Causes caused by misuse ,abuse or improper transportation, use, maintenance or storage obstacles or damage;
- Failure or damage caused by force majeure (such as earthquake, war ,disaster, etc.) or accident bad;
- The zipper and tower buckle are damaged due to excessive force
- Disconnection or tearing caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning of flooding;
- Damage caused by unauthorized disassembly;
- Aging ,discoloration ,abrasion, rupture and other losses that occur during the normal use of the product.
- If the original identification label of the product is changed or damaged ,this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are
not within the scope of the guarantee.
You should check on the spot and raise objections to any discrepancies.
FCC
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
FCC ID: YB2-H101
Because the earbus is too small, the FCC ID number can only be printed on the
charging box.01
Contact Us
HONGFUTAI E-TECH(SHENZHEN)CO.,LIMITED
http://hott.net.cn
ADD:4F, No.17, Xinxing Industrial Park, Xinhe Community, Fuhai Street, Baoan
District, Shenzhen 518103, China.
U.S.A Service Center
Toll-free: 1-866-468-8280(09:00-17:30)
E-mail: service@hott.net.cn
HOTT Corp Customer Service: LCHF-HOTT 13620 Benson Ave. Ste B Chino. CA
91710-5201.
Germany Service Center
Toll-free: +49 7171 8707105(8:00-17:00) E-mail:
info.eu@hott.net.cn
Address: Rolf-Michael Pohl Klarenbergstraẞe 36 73525 Schwäbisch Gmünd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>