SIIG CE-H27D11-S1 4K 60Hz HDMI Over Cat6 Extender with Loopout & IR User Manual

CE-H27D11-S1 4K 60Hz HDMI Over Cat6 Extender with Loop out & IR
User Manual

TWO YEAR
Manufacturer Warranty
P/N: CE-H27D11-S1
04-1381A

Features

• Support HDMI 4K@60 4:4:4 8bits,
• Support HDCP 2.2 & 1.4
• Support HDR which is 4K2K@60 4:2:0 10bits
• Extend 4K@601-1z video up to 230ft/70m through a Cat6/6a/7 network cable
• Support EDID learning
• Support HDMI loop-out on Transmitter
• Support audio extraction via 3.5mm Jack of Receiver
• HDMI Audio Format: PCM2/5.1/7.1, Dolby & DTS 5.1
• 3.5mm Audio Format: PCM2
• Support IR extension from receiver to transmitter (IR frequency 20K-60KHz)
• Lightning Protection, Surge Protection, ESD Protection

Package Contents

• Transmitter & Receiver
• Power adapter DC 5V/1A x2
• IR blaster cable
• IR receiver cable
• Mounting kits
• User Manual

Layout

Transmitter (TX)

1. POWER JACK: DC SVP1A
2. HDMI OUTPUT: Connect to HDMI display
3. HDMI INPUT: Connect to HDMI source
4. Reset BUTTON: Press to restart the device
5. RJ-45: Connect to Receiver with Cat6 cable
6. IR out: Connect with the IR blaster extension cable, please get closer to the source device while using
7. Power/Signal LED:
   Flash when no HDMI signal.
   Solid blue when HDMI signal connected.

Receiver (RX)

1. POWER JACK: DC SVP1A
2. HDMI OUTPUT: Connect to HDMI display
3. 3.5mm Output: For audio extract
4. Reset BUTTON: Press to restart the device
5. RJ-45: Connect to Transmitter with Cat6 cable
6. IR in: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
7. Power/Signal LED:
   Flash when no HDMI signal.
   Solid blue when HDMI signal connected.

EDID Learning

• The extender will auto-learning RX connected display EDID.

• If the TX loop-out connected display also, the device will use the smaller display EDID of two displays.
  For example
  1. Two displays are 4K@60 & 1080p@60, the extender will use 1080p@60 EDID. Two displays’ output resolution will be 1080p@60.
  2. Two displays are 4K@60, the extender will use 4K@60 EDID. Two displays’ output resolution will be 4K@60.

• Please press the reset button to re-learning EDID after a display change.

Application

IR cable

1. Power
2. IR Signal
3. Null

1. Power
2. IR Signal
3. Grounding

Wall mount

Dear Valued Customer,
WE REALLY APPRECIATE YOUR PURCHASE
~thank you~
Support
For more info or tech support
http://www.siig.com/support
Feb 2022 Copyright CO 2022 by SIIG, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>