JBL Clip 4 Portable Waterproof Speaker User Guide
- June 5, 2024
- JBL
Table of Contents
JBL Clip 4 Portable Waterproof Speaker
What’s The In Box
Bluetooth Pairing
Play
Charging
Carabiner
Waterproof Dustproof IP67
Tech Spec
Transducer: 40 mm/ 1.5″
Output power: 5W RMS
Frequency response: 100 Hz- 20 KHz
Signal-to-noise ratio: >85dB
Battery type: Lithium-ion polymer 3.885 Wh
Battery charge time: 3 hours (5 V / 500 mA)
Music playtime: up to 10 hours (varies by volume level and audio content)
Bluetooth® version: 5.1
Bluetooth® profile: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2400- 2483.5 MHz
Bluetooth® transmitter power: < 10 dBm (EIRP)
Dimensions (W x H x D): 86.30 x 134.50 x 46.0 mm I 3.4″ x 5.3″ x 1.8″
Weight: 0.239 kg / 0.527 lbs
To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Clip 4 to liquids without removing cable connection. Do
not expose JBL Clip 4 to water while charging. It may result in permanent
damage to the speaker or power source.
After a liquid spill, do not charge your speaker until it’s completely dry and
clean. Charging when wet might damage your speaker.
When using an external adapter, the output voltage/ current of the external
adapter should not exceed SV /3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>