JBL Free II True Wireless Earbuds User Guide
- June 5, 2024
- JBL
Table of Contents
EERF II
quick startguide
WHAT’S IN THE BOX
how to wear
First
time use
power
on & connect
DUAL CONNECT
|
---|---
power off
Manual Controls
| power on & connect to device | Reconnecting left & righr | power on \power off |
|---|---|---|
| 
BUTTON COMMAND
| 1. Stereo Mode | 2. Mono Mode |
|---|
Charging
led behaviors
TECH SPEC
| Model: | FREE II |
|---|---|
| Driver size: | 5.6 mm / 0.22” Dynamic driver |
| Power supply: | 5 V |
1 A
Weight:| 61.6 g/0.135 lbs
Earpiece:| 4.8 g/0.011 lbs/pc (9.6 g /0.021 lbs combined)
Charging case:| 52 g/0.114 lbs
Headset battery type:| Lithium-ion Battery (55 mA / 3.7 V)
Charging case battery type:| Lithium-ion Battery (650 mA / 3.8 V)
Charging time:| <2 hrs from empty
Music play time with BT on:| up to 6 hrs
Frequency response:| 20 Hz – 20 kHz
Impedance:| 16 ohm
Sensitivity:| 100 dB SPL@1 kHz / 1 mW
Maximum SPL:| 95 dB
Microphone sensitivity:| _38dBV@1kHZ\1mW
Bluetooth version:| 5.0
Bluetooth profile version:| A2DP 1.3, AVRCP 1.5, HFP 1.7
Bluetooth transmitter frequency range:| 2.4 GHz – 2.48 GHz
Bluetooth transmitter power:| <12 dBm
Bluetooth transmitter modulation:| GFSK, π/4-DQPSK, 8DPSK
Maximum operation temperature:| 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLFREE2) have also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.673 W/kg.The device was tested for
typical bodily operations where the product was kept 0 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user’s head and the back of
the headset. The use of belt clips, holsters and similar accessories shall not
contain metal parts in its assembly. The use of accessories that do not meet
these requirements may not comply with IC RF exposure requirements and should
be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user ear and the product (including the
antenna). Head exposure that does not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLFREE2
FCC ID: APIJBLFREE2
HP_JBL_FREE II_QSG_SOP_V4
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>