NETGEAR 6000450 AirCard USB Modems and Mobile Hotspots User Manual

6000450 AirCard USB Modems and Mobile Hotspots
User Manual

6000450 AirCard USB Modems and Mobile Hotspots

Usage: Laptop screen mounted external antenna for improving MIMO, 3G/4G coverage in areas with low signal strength.
Cable Length: 50 cm / 19.7″
Compatibility: AirOard 753S/754S, AirCard 312U/313U Requires USG or mobile hotspot with 2 TS-9 connectors.
Note: Ideal for use in low signal areas.

1. Flip open the antenna connector covers on your USB modem or mobile hotspot.
2. Insert the antenna plugs into the TS-9 connectors.
3. Attach the laptop clips to the MIMO antenna.
4. Clip the antenna to your laptop screen.
5. Insert the USB modem into your laptop or turn on your mobile hotspot.

| | | |
---|---|---|---|---
| | | |
1| | 16-Mar-11| | JF
REV| CHANGE NOTICE| DATE| DRFT| APP
| THIS DOCUMENT, SUBMITTED IN CONFIDENCE, CONTAINS PROPRIETARY INFORMATION WHICH SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR MANUFACTURING OR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION OF SIERRA WIRELESS, INC| Copyright 2010
---|---|---
| TITLE: 2400117 MIMO ANTENNA BACK CARD|
DESIGNED: Jana Fernandes| DRAWING NO: 2400117| REV.| 1
APPROVED:| SCALE: 100%| SIZE.| | UNITS:| SHEET

NOTES APPLICABLE TO PART MANUFACTURER:

1. DESCRIPTION AND APPLICATION: RETAIL BOX FOR WIRELESS COMMUNICATIONS DEVICE PACKAGING

2. APPLICABLE DOCUMENTS:
   2400117: REFERENCE ARTWORK
   2140122: SIERRA WIRELESS GENERIC COSMETIC SPECIFICATION
   ASME Y14.5M-1994: GEOMETRIC DIMENSIONING AND TOLERANCING

3. MATERIAL:
   3.1 600G CLAY COATED CHIPBOARD (1mm ± 0.0Imm THICK)
   3.2 THE PART/ASSEMBLY SHALL CONTAIN NO HAZARDOUS SUBSTANCES PER THE WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) 2002/96/EC RoHS DIRECTIVE.
   3.3 THE PART/ ASSEMBLY SHALL CONFORM TO THE EU DIRECTIVE ON PACKAGING AND PACKAGING WASTE 94/62/EC

4. FINISH:
   4.1 GLOSSY PP LAMINATE, BOTH SIDES 4.2 REFER TO ARTWORK FILE 2400117 FOR GRAPHIC SPECIFICATIONS

5. GENERAL REQUIREMENTS:
   5.1 PARTS SHALL BE CLEAN AND FREE OF ALL FOREIGN MATTER.
   5.2 REFERENCE ARTWORK P/N 2400111.
   5.3 CONTROLLING GEOMETRY IS DEFINED BY DXF FILE DATABASE. ALL SURFACES ARE TO BE WITHIN 0.10 OF THE DATABASE UNLESS OTHERWISE SPECIFIED.

6. QUALITY ASSURANCE REQUIREMENTS:
   6.1 ALL DIMENSIONS INDICATED IN THE DRAWING ARE CRITICAL TO FORM, FIT, OR FUNCTION.
   6.2 DIMENSIONS INDICATED WITH A II SYMBOL DENOTE QUALITY PROCESS CONTROL, (OPC), DIMENSIONS.
   6.3 PRODUCTION LOT SAMPLES MUST DEMONSTRATE A Cpk VALUE OF 1.33 OR HIGHER. IF THE Cpk DROPS BELOW 1.33 AT ANY TIME DURING THE MANUFACTURE OF THIS PART, THEN THE SUPPLIER MUST 100% SCREEN ALL THOSE PARTS TO THOSE SPECIFIED CRITICAL PARAMETERS.

7. 1 NO CHANGE SHALL BE ALLOWED ON PRODUCTION MATERIAL, REGARDLESS OF WHETHER SUCH CHANGE AFFECTS REQUIREMENTS SPECIFIED, WITHOUT PRIOR EXPLICIT WRITTEN APPROVAL BY SIERRA WIRELESS.

NOTES APPLICABLE TO CONTRACT MANUFACTURER:

1. INCOMING INSPECTION DIMENSION MARKED BY(XX.XX)
2. SAMPLE INSPECTION PER 0E1.11-0000-IL
3. THE CONTRACT MANUFACTURER SHALL REQUIRE THE PART MANUFACTURER TO PROVIDE SPC DATA AND REVIEW WITH SIERRA WIRELESS.

UNLESS OTHERWISE NOTED, THIS DOCUMENT CONTAINS SIERRA WIRELESS CONFIDENTIAL INFORMATION. REPRODUCTION, USE, DISCLOSURE, OR TRANSMITTAL OF ALL OR ANY PORTION OF THIS DOCUMENT IS PROHIBITED, EXCEPT TO THE EXTENT APPROVED BY SIERRA WIRELESS. SIERRA WIRELESS EXPRESSLY RESERVES ALL RIGHTS UNDER PATENTS, TRADEMARKS, COPYRIGHTS, AND TRADE SECRETS. COPYRIGHT (C) 2011, SIERRA WIRELESS.

UNLESS OTHERWISE SPECIFIED, ARE PRE THE FOLLOWING TOLERANCES| **| PROJECT NAME| PART DESCRIPTION|
---|---|---|---|---
INCHES
.X ± .1
.XX ± .06
.XXX ± .040| MM
X ± 2.5
X.X ± 1.5
X.XX ± 1.0| ANGLES
X ± 2º
X.X ± 1.0°| DRAWN
B. WU| DATE
20-JAN-11| | 13811 Wireless Way
Richmond, British Columb
Canada, V6V 3A4
Tel: 604.231.1100
Fax:** 604.231.
MATERIAL
SEE NOTE| DES ENGR
B. WU| DATE
20-JAN-11
CHK
B. GILBE| DATE
23-FEB-11
FINISH
SEE NOTE| PRT FILENAME
2400117| SIZE
C| UNITS
MM| DRAWING NO.
240011| REV
1_0
DRW FILENAME
2400117
DO NOT SCALE PRINT| RELEASE LEVEL
PRODUCTION: 0| SCALE: 1.00| SHEET 1 OF 1

Accessory Part Number: 6000450
AirCard is a registered trademark of Sierra Wireless.
© 2011 Sierra Wireless.
PN 2400117
Rev 1
To comply with U.S. Federal Communications Commission (FCC) and Industry Canada (IC) guidelines respecting safety levels of radio frequency (RF) exposure, a separation distance of at least 20 cm/8 inches is required between the external antenna and user body. To comply with R&TTE Directive 1999/5/EC, please install your external antenna as shown in the picture.

MIMO, 3G/4G Antenna with 2 TS-9 connectors
GSM/EDGE/UMTS/HSPA/HSPA+/HSPA+DC/CDMA/EV-DO/LTE
700-960/1710-1990/2110-2170/2500-2700 MHz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>