NETGEAR MR6110 M6 5G WiFi 6 Mobile Router User Manual
- May 15, 2024
- NETGEAR
Table of Contents
NETGEAR MR6110 M6 5G WiFi 6 Mobile Router
Product Information
Specifications
- Models: MR6110, MR6400, MR6500, MR6150, MR6450, MR6550
- Connectivity: 5G speeds
- Device Capacity: Up to 32 connected devices
- Display: Touch screen display
- Ports: USB Type-C, RJ45 Ethernet port, 2 antenna ports
- Battery: Removable battery for all-day use
Product Usage Instructions
Chapter 1: Get Started
The Nighthawk M6 is designed to securely connect up to 32 devices with 5G speeds. It features a touch screen display for easy management of data and device connections. You can switch between wired and mobile broadband and enjoy extended battery life with the removable battery.
To set up your Nighthawk M6 and connect to the Internet:
- Ensure the device is charged using the provided USB-C charging cable.
- Power on the device and follow the on-screen instructions for initial setup.
- Connect to a network by selecting the appropriate settings on the touch screen display.
- For software updates, the device will automatically check periodically or you can manually check for updates.
Chapter 2: Use Your Nighthawk M6
To manage WiFi settings:
- Access the Nighthawk M6 interface.
- Specify WiFi settings such as network name and password.
- Toggle between 5 GHz and 6 GHz WiFi options.
- Change encryption settings for enhanced security.
To manage security:
- Update login settings for the web interface.
- View connected devices and activate SIM security for added protection.
For maintaining your Nighthawk M6:
- Utilize Power Manager to manage power efficiently.
- Extend battery life by following recommended practices.
Frequently Asked Questions
- Q: What do I do if I can’t connect a device to the Nighthawk M6?
- A: Check the device compatibility and ensure correct network settings are in place.
- Q: What do I do if I can’t access the Internet?
- A: Verify network connectivity and troubleshoot any connection issues.
- Q: How do I disconnect from the mobile broadband network?
- A: Access network settings and choose the option to disconnect from the mobile broadband network.
User Manual
Nighthawk M6 Pro, Nighthawk M6
Models
MR6110 MR6400 MR6500 MR6150 MR6450 MR6550
February 2023 202-12621-02
NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA
Nighthawk M6
Support and Community Visit netgear.com/support to get your questions answered
and access the latest downloads. You can also check out our NETGEAR Community
for helpful advice at community.netgear.com. Trademarks ©NETGEAR, Inc. NETGEAR
and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only. Regulatory and Legal Si ce
produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/. (If this product is sold
in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.) For regulatory compliance
information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/. See the regulatory compliance
document before connecting the power supply. For NETGEAR’s Privacy Policy,
visit https://www.netgear.com/about/privacy-policy. By using this device, you
are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree,
return the device to your place of purchase within your return period.
Compliance FCC regulations restrict operation of this device to indoor use
only when it is operating in the 6 GHz band (5.92-7.125GHz). The operation of
6 GHz band devices is prohibited on oil platforms, cars, trains, boats, and
aircraft, except that operation of this device is permitted in large aircraft
while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125
GHz band is prohibited for control of or communications with unmanned aircraft
systems.
2
Nighthawk M6
FCC regulations restrict the operation of this device in the 5.925-7.125 GHz
band to indoor use only. 6 GHz is available only when the device is powered by
AC adapter connected to AC mains. The device cannot be used outdoors on 6 GHz,
as required by FCC/IC rules. When using external antennas, their net gain
(antenna + cable loss) must be less than what is specified in Table 3 and
Table 4 in LTE and 5GNR transmission specifications on page 62 in Chapter 7,
“Specifications” as required by FCC. Restriction applies in:
AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/
LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK(NI)/HR Operation in
5150~5350MHz is restricted to indoor use only. This device is restricted to
indoor use only when operating in the 5945 to 6425 MHz band (to the extent
that these frequencies are made available). This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator and your
body. SAR is measured with the device at 5 mm from the body, while
transmitting at the highest certified output power level in all frequency
bands of the device. The maximum SAR value is 1.652 W/kg (body) averaged over
10 gram of tissue.
Get Started
The Nighthawk M6 securely connects up to 32 connected devices with 5G speeds
and lets you manage your data, check device connections and more, with the
touch screen display. Plus, you can switch between wired and mobile broadband
and go all day on the removable battery.
This chapter provides an overview of features, and instructions for how to set
up your Nighthawk M6 and connect to the Internet. The chapter covers the
following topics:
· Meet your Nighthawk M6 · Nighthawk band support matrix · Set up your
Nighthawk M6 · Charge the battery · Connect to the Internet · Connect from a
smartphone using the QR code · Replace a SIM card · Home screen · Manage the
Nighthawk M6 with NETGEAR Insight Pro · Power off or reset the Nighthawk M6 ·
Security credentials · Connect to the Nighthawk M6 with tethering · Log in to
the Nighthawk M6 web page to view or change settings
NOTE: The Nighthawk M6 automatically checks for new software or firmware
updates periodically. If an update becomes available, the Nighthawk M6
displays an alert. You can also check for updates manually without receiving
an alert.
7
Nighthawk M6
Meet your Nighthawk M6
The Nighthawk M6 front panel has a touch screen, a Home button, and a Back
button.
Figure 1. Nighthawk M6 front panel
The Nighthawk M6 comes with a USB-C charging cable. The Nighthawk M6
connectors are located on the rear panel. The connectors include a USB Type-C
connector, an RJ45 Ethernet port, and two antenna ports.
Get Started
8
User Manual
Nighthawk M6
Figure 2. Nighthawk M6 connectors
Nighthawk band support matrix
The devices in the Nighthawk device family provide different levels of radio
frequency band support. The more advanced models support mmWave (millimeter
waves) and also WiFi 6E. Other models support WiFi 6E but not mmWave. Less
advanced models only support WiFi 5E.
The following table summarizes the band support that the M6 series devices
provide.
Table 1. Nighthawk band support
Device
WiFi support
MR6500, MR6550 M6 Pro
WiFi 6E
MR6400, MR6450 (M6 WiFi 6E Pro)
MR61110, MR6150 WiFi 6
mmWave support yes
no
no
–
Get Started
9
User Manual
Nighthawk M6
Set up your Nighthawk M6
To set up your Nighthawk M6: 1. Insert the battery.
2. Install the back cover. 3. Firmly close the back cover. 4. Push the Power
button to power on the Nighthawk M6.
The Home screen appears.
Get Started
10
User Manual
Nighthawk M6
Familiarize yourself with its LCD screen, icons, buttons, and connectors.
Charge the battery
Your battery comes partially charged. To charge your battery: 1. Connect the
USB-C charging cable to your Nighthawk M6.
2. Connect the other end of the cable to an USB port on your computer or to
the USB charger.
Connect to the Internet
When you turn on your Nighthawk M6, it automatically connects to the network
in your area. Connect your device to the Nighthawk M6 WiFi network to access
the Internet.
Get Started
11
User Manual
Nighthawk M6
Depending on the specific model and service provider, your Nighthawk M6 might
come with a preinstalled SIM card. If so, the SIM must be activated on a data
plan from that service provider. If your Nighthawk M6 does not come with a
preinstalled SIM card, get a SIM card with an active data plan from your
service provider. Contact your service provider for any SIM related issues.
To connect to the Internet: 1. Press the Power button to turn on the Nighthawk
M6
The device powers up and the Lock screen appears.
2. On your laptop or WiFi device, open your WiFi network connection manager.
3. Select the Nighthawk M6 network with the WiFi name and password.
The Nighthawk M6 WiFi network name and password display on the LCD Home page.
If the LCD screen is blank (a power saving feature) press and quickly release
the Power button. The default WiFi password is also printed on a label under
the battery.
Connect from a smartphone using the QR code
The top area of the dashboard contains a QR code. You can connect from a
smartphone by tapping the QR code.
Get Started
12
User Manual
Nighthawk M6
To connect using the QR code: 1. Tap the QR code icon the Nighthawk M6 LCD
home screen.
A QR code displays. 2. Point your phone’s camera at the QR code.
Your phone connects to the Nighthawk M6 WiFi network. 3. Launch your Internet
browser.
Replace a SIM card
In some circumstances you might need to replace the SIM card. To replace a SIM
card: 1. Remove the back cover by lifting the corners. 2. Remove the battery.
3. Slide out the SIM card. 4. Insert the replacement SIM card.
Get Started
13
User Manual
5. Insert the battery.
Nighthawk M6
6. Install the back cover.
Home screen
You can use the Home screen to view the Nighthawk M6’s status, configure WiFi
settings, view data usage details, and view system alerts.
Figure 3. Home screen
Get Started
14
User Manual
Nighthawk M6
Table 2. Icons
Icons
Description
This indicates the strength of the mobile broadband network signal.
5G network indicator. Lets you know you are connected to the 5G network.
This indicates the amount of charge in the battery.
–
Manage the Nighthawk M6 with NETGEAR Insight Pro
You can manage the Nighthawk M6 with NETGEAR Insight Pro. NETGEAR Insight Pro
is a Cloud-based management platform that allows you to manage, deploy, and
configure enterprise mobile devices such as the Nighthawk M6 with complete
visibility and simple control, centrally applying company policies, profiles,
monitoring, and more.
When the Nighthawk M6 is running under Insight Pro, the Nighthawk M6 shows the
Insight icon as shown in the following dashboard image.
For more information on NETGEAR Insight Pro, visit this site: https://www.netgear.com/insight/mobile-hotspot
Get Started
15
User Manual
Nighthawk M6
Power off or reset the Nighthawk M6
To power off or reset the device: 1. Hold down the Power button for 5 seconds.
The Power Off/Reset menu appears and you are prompted to power off or restart
the device. 2. Tap Power Off to power off the device, or choose restart to
reset the device.
Security credentials
Two passwords are associated with the Nighthawk M6: · WiFi password. Use this
to connect your computer or WiFi device to your Nighthawk
M6 network. This character string is unique to your device. It displays on the
home screen. If the screen is blank (a power-saving feature), press and
quickly release the Power button. The default WiFi password is also printed on
a label under the battery. For information about changing WiFi passwords, see
Change WiFi encryption settings on page 34.
· Web admin login password. Use this password to log in to the Nighthawk M6
web page as an administrator. Some changes can be made using the LCD. You must
log in as an administrator to use certain features. The default login password
is printed on a label under the battery and can be 531 characters in length.
Connect to the Nighthawk M6 with tethering
You can connect a computer to the Nighthawk M6 using the USB-C cable instead
of connecting with WiFi. This kind of cable connection is called tethering.
NOTE: The computer’s operating system detects the Nighthawk M6 the first time
you use the USB-C cable to connect the computer to the Nighthawk M6.
To install drivers on computers running Windows: 1. Make sure the Nighthawk M6
is connected to the internet. 2. Ensure that the Nighthawk M6 is powered off.
Get Started
16
User Manual
Nighthawk M6
3. Connect the Nighthawk M6 to your computer using the USB cable.
The Nighthawk M6 automatically powers on.
After the driver is installed, you can visit the Nighthawk M6 web page to
customize your Nighthawk M6’s advanced settings. This is an optional step.
Log in to the Nighthawk M6 web page to view or change settings
Your Nighthawk M6 comes configured and ready to use as is. You can use the
Nighthawk M6 web page to manage advanced settings. To log in to your Nighthawk
M6 web page: 1. From the computer or WiFi device that is connected to the
Nighthawk M6, launch
a web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Log in using your admin password. The default admin login password is
printed on the product label. The password is case sensitive.
Get Started
17
User Manual
Nighthawk M6
The web dashboard displays.
Get Started
18
User Manual
Use Your Nighthawk M6
This chapter explains how to use your Nighthawk M6. The chapter covers the
following topics: · View data usage on the Nighthawk M6 web page · View SMS
messages from the Nighthawk M6 · View SMS messages from the Nighthawk M6 web
page · Delete a message from the Nighthawk M6 · Delete a message from the
Nighthawk M6 web page · View alerts from the Nighthawk M6 · View alerts from
the Nighthawk M6 web page · Turn on dual-band WiFi from the Nighthawk M6 ·
Turn on dual-band WiFi from the Nighthawk M6 web page · Enable GPS from the
Nighthawk M6 · Manage your broadband network connection · Connect to WiFi ·
Manage WiFi · Manage WiFi Security
19
Nighthawk M6
View data usage on the Nighthawk M6 web page
To view data usage information on the Nighthawk M6 web page: 1. From a
computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password printed on the product label. The password is case
sensitive.
The Nighthawk M6 web page displays the data usage for the current billing
cycle and for the current broadband session.
View SMS messages from the Nighthawk M6
You can tell from your Nighthawk M6 display if you have unread messages, and
you can view them directly from there. To view SMS messages from the Nighthawk
M6 display: 1. Tap the message to read the full text.
View SMS messages from the Nighthawk M6 web page
To view SMS messages from the Nighthawk M6 web page: 1. From a computer or
WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Type http://192.168.1.1 in the browser bar.
The Nighthawk M6 web page displays.
Use Your Nighthawk M6
20
User Manual
Nighthawk M6
3. Enter the administrator login password. The default password is printed on
the product label. The password is case sensitive. The home page displays.
4. Select Messages. A list of messages displays, showing the first portion of
the text.
5. Click a message to read the full text.
Delete a message from the Nighthawk M6
You can delete messages from your Nighthawk M6 display. To delete messages
from the Nighthawk M6 display: 1. Tap Settings.
2. Tap Messages. The Messages screen displays.
3. Select the message to delete. 4. Tap Delete.
The message is deleted.
Use Your Nighthawk M6
21
User Manual
Nighthawk M6
Delete a message from the Nighthawk M6 web page
To delete a message from the Nighthawk M6 web page: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Messages. A list of messages
displays, showing the first portion of the text. 5. Select the message and
click the Delete button. The message is deleted.
View alerts from the Nighthawk M6
When you unlock the device screen, the device displays any current alerts.
Your Nighthawk M6 displays alerts to advise you of device status changes. When
there are outstanding alerts, the alerts displays on the LCD screen and on the
web page. Alerts remain as long as the issues that cause them are active. When
the issues are resolved, the alerts are removed automatically. 1. Press the
Power button to wake the Nighthawk M6.
The Lock page displays. 2. Swipe up to unlock the Nighthawk M6.
Use Your Nighthawk M6
22
User Manual
Nighthawk M6
Any current alerts are shown on the display. For example, if no SIM card is
installed, the following alert appears:
View alerts from the Nighthawk M6 web page
Your Nighthawk M6 displays alerts to advise you of device status changes. When
there are outstanding alerts, the alerts displays on the screen. Alerts remain
as long as the issues that cause them are active. When the issues are
resolved, the alerts are removed automatically.
To view alerts from the Nighthawk M6 web page: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Type http://192.168.1.1 in the browser bar. 3. Enter the
administrator login password.
The default password is printed on the product label. The password is case
sensitive.
The Nighthawk M6 web page displays.
Any current alerts are shown on the display.
Follow the instructions in each alert to address the conditions that caused it
to display.
Use Your Nighthawk M6
23
User Manual
Nighthawk M6
Turn on dual-band WiFi from the Nighthawk M6
Dual-Band is supported on all models. Only the MR6450 and MR6550 allow Dual-
Band (2.4 & 6 GHz). All models enable Dual-Band (2.4 & 5 GHz) configuration in
the GUI. Note that the overall throughput speed could decrease when WiFi dual-
band is enabled.
If your device supports this feature, to turn on dual-band WiFi from the
Nighthawk M6: 1. Tap WiFi. 2. Tap Band.
The Band screen displays. 3. Tap Dual-Band (2.4 & 5 GHz) or Dual-Band (2.4 & 6
GHz). 4. Click Apply.
Your settings are saved.
Turn on dual-band WiFi from the Nighthawk M6 web page
Some versions of the Nighthawk M6 can broadcast WiFi signals in the 2.4 GHz
and 5 GHz WiFi bands. Note that the overall throughput speed could decrease
when WiFi dual-band is enabled.
To turn on dual-band WiFi from the Nighthawk M6 web page: 1. From a computer
or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive.
The home page displays.
Use Your Nighthawk M6
24
User Manual
Nighthawk M6
4. Select WiFi Band. The WiFi Band page displays.
5. If your Nighthawk device model supports dual-band, select Dual-Band (2.4 &
5 GHz) or Dual-Band (2.4 & 6 GHz).
NOTE: The MR6150 does not support the dual-band feature.
The Apply and Discard buttons display at the bottom of the page. 6. Click
Apply.
A message displays telling you that to save this change, your device must
restart WiFi connections.
Enable GPS from the Nighthawk M6
You can enable GPS location services on some Nighthawk M6 models. See “GPS
Support” in the Specifications chapter for information on which models support
GPS. When GPS is enabled, users can turn on location services to launch GPS-
enabled apps on a computer and use the NMEA port to obtain a GPS location. To
enable GPS on the Nighthawk M6: 1. From the Nighthawk M6 dashboard, select
Settings > More > GPS.
The GPS screen displays.
2. Pull the slider to the right (On) to enable GPS. GPS is enabled.
Use Your Nighthawk M6
25
User Manual
Nighthawk M6
Manage your broadband network connection
You can view the mobile broadband network status, turn domestic data on and
off, and turn international roaming on and off.
View mobile broadband network status from the Nighthawk M6
To view network status from the Nighthawk M6: 1. Tap Settings.
2. Tap Mobile.
3. To view details about the network status, tap Status.
Use Your Nighthawk M6
26
User Manual
Nighthawk M6
The Network Status screen displays.
View mobile broadband network status from the Nighthawk M6 web page
To view network status from the Nighthawk M6 web page: 1. From a computer or
WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings >Status > Network. The
Status page displays. 5. View the Network Status section.
Turn domestic data off from the Nighthawk M6 web page
NOTE: You can turn domestic data off, but not on from the web page.
To turn domestic data off from the Nighthawk M6: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays.
Use Your Nighthawk M6
27
User Manual
Nighthawk M6
4. Select Settings > Advanced Settings > Cellular. The preferences page
displays.
5. Uncheck the Data check box. The Apply and Discard buttons display at the
bottom of the page.
6. Click the Apply button. Your settings are saved.
Turn international roaming on and off from the Nighthawk M6 web page
Before you turn on international roaming, make sure that you are aware of any
extra charges for data that you might incur. To turn international roaming on
and off: 1. From a computer or WiFi device that is connected to the Nighthawk
M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > Advanced > Cellular.
The preferences page displays. 5. In the check box for Roaming Data, check the
box to turn roaming On or uncheck it to turn roaming Off. The Apply and
Discard buttons display at the bottom of the page. > 6. Select Apply. Your
settings are saved.
Use Your Nighthawk M6
28
User Manual
Nighthawk M6
Connect to WiFi
You can connect up to 32 devices (such as smartphones, laptops, tablets,
digital cameras, printers, gaming consoles, and digital picture frames) to
your Nighthawk M6 network. For information about setting connections for WiFi
networks, see View mobile broadband network status from the Nighthawk M6 on
page 26. To connect using the WiFi password: 1. On the WiFi device, view the
list of available WiFi networks. 2. Connect to the network that corresponds to
your Nighthawk M6 network as displayed
on the LCD screen. 3. When prompted, enter the WiFi password for your
Nighthawk M6 network.
The WiFi password displays on the Nighthawk M6 LCD screen. If the screen is
turned off, press and quickly release the Power button to wake the Nighthawk
M6.
Manage WiFi
You can set up the WiFi radio of the Nighthawk M6 to meet your WiFi needs by
customizing settings on the Nighthawk M6 web page. On the Nighthawk M6 web
page,depending on the MR device version you are configuring the following WiFi
profiles are available: · Dual-Band (2.4 & 5 GHz) or Dual-Band (2.4 & 6 GHz).
Support two separate WiFi
networks simultaneously using both a 2.4- and 5-GHz frequency band or using a
2.4- and 6-GHz frequency band.
NOTE: The MR6150 does not provide dual-band support.
· 2.4 GHz only. Share your main WiFi with 2.4 GHz devices that you trust. · 5
GHz Only. Share your main WiFi with 5 GHz devices that you trust · 6 GHz Only.
Share your main WiFi with 6 GHz devices that you trust
NOTE: The MR6150 GUI does not provide this selection.
Use Your Nighthawk M6
29
User Manual
Nighthawk M6
· Turn Off WiFi. Turn off WiFi. By default, 5 GHz Only WiFi is enabled. If
your place of business does not allow WiFi or for any other reason you want to
disable WiFi and use the Nighthawk M6 only in tethered mode, the Nighthawk M6
gives you that option.
NOTE: WiFi on the Nighthawk M6 will restart whenever you make a change to WiFi
settings. Please ensure your connected devices are set to automatically
reconnect to WiFi.
Specify WiFi settings from the Nighthawk M6
To specify the WiFi settings from the Nighthawk M6: 1. Press the Power button
to wake the device.
2. To turn the WiFi signal on or off: a. Tap WiFi. The WiFi screen displays.
b. Tap Options. The WiFi Options screen displays.
c. Tap the WiFi Signal field. d. To toggle the WiFi radio, tap WiFi On/Off.
A message displays to tell you that changing the WiFi info temporarily causes
connectivity loss.
e. Click Apply. Your settings are saved.
3. To power down the WiFi radio after a set period of inactivity: a. Tap WiFi
. The WiFi Options screen displays.
b. Tap Options.
Use Your Nighthawk M6
30
User Manual
Nighthawk M6
The WiFi Options screen displays. c. Tap the WiFi Standby field to modify the
standby timer.
The WiFi Standby screen displays. d. Tap the setting for the selection that
you want.
The Changes Saved screen appears. e. Click Apply to continue.
Your settings are saved.
Use the Nighthawk M6 web page to set up a profile that is more detailed than
the basic profiles offered on the Nighthawk M6.
Turn on 5 GHz WiFi or 6 GHz WiFi from the Nighthawk M6 web page
For indoor usage when the device is on the AC charger, 6 GHz is available.
NOTE: When you go from indoor use to mobile use, you must turn on 5GHz WiFi,
and when you connect to AC power you must manually switch back to 6GhZ WiFi.
When all of your devices support 5 GHz WiFi, use 5 GHz WiFi for faster
downloads. To turn on 5 GHz WiFi or 6GHz from the Nighthawk M6 web page: 1.
From a computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > General > WiFi Band .
The WiFi Options page displays. 5. Select 5GHz Only or select 6GHz Only.
NOTE: The 6GHz Only selection does not appear for the MR6150.
Use Your Nighthawk M6
31
User Manual
Nighthawk M6
The Apply and Discard buttons display at the bottom of the page. 6. Click the
Apply button.
A message displays telling you that to save this change, your device must
restart WiFi connections. 7. Click the Continue button. Your settings are
saved.
Change WiFi settings from the Nighthawk M6 web page
To specify WiFi settings on the Nighthawk M6 web page: 1. From a computer or
WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > General > WiFi Band >
More > 5GHz > Global Settings. 5. To allow the WiFi information to be
displayed on the Nighthawk M6 home screen, leave the WiFi Info on Home check
box selected. 6. Click the Apply button. A message displays to tell you that
changing the WiFi info will temporarily cause connectivity loss. Your settings
are saved.
Manage WiFi Security
NOTE: WiFi on the Nighthawk M6 will restart whenever you make a change to WiFi
settings. Please ensure your connected devices are set to automatically
reconnect to WiFi.
Use Your Nighthawk M6
32
User Manual
Nighthawk M6
Change WiFi network name and password from the Nighthawk M6
The WiFi network name identifies your WiFi network and is visible to other
WiFi-enabled devices. To change the network name and password from the
Nighthawk M6. 1. Press the Power button to wake the device.
2. Tap WiFi > WiFi. The settings screen for the network displays.
3. Tap the Pencil (Edit) icon beside the name or password. A message displays
telling you that currently connected devices must re-authenticate to the
network with the updated information.
4. Tap Continue. The message closes.
5. Enter the new WiFi name and password. 6. Tap Done.
Your settings are saved.
Change WiFi network names and passwords from the Nighthawk M6 web page
The WiFi network name identifies your WiFi network and is visible to other
WiFi-enabled devices.
To change network name and password from the Nighthawk M6 web page: 1. From a
computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
Use Your Nighthawk M6
33
User Manual
Nighthawk M6
3. Enter the administrator login password. The default password is printed on
the product label. The password is case sensitive. The home page displays.
4. Select Settings > General > WiFi Band. The WiFi connect page displays.
5. Change the WiFi Name and WiFi Password fields as desired. 6. Click the
Apply button.
A message displays telling you that to save this change, your device must
restart WiFi connections. 7. Click the Continue button. Your settings are
saved. All devices that were connected must reconnect with the new name and
password.
Change WiFi encryption settings
For information about WiFi security, see Security credentials on page 16. To
change the type of security used for main WiFi: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > General > WiFi Band
More > 5GHz Wireless. The wireless settings display. 5. In the Encryption menu for main WiFi or guest WiFi, select a security option:
Use Your Nighthawk M6
34
User Manual
Nighthawk M6
WPA2 Personal AES (default) WPA WPA2 WPA2 WPA3 WPA3 Personal AES> · WPA2
Personal AES (default). Strong security supported by newer WiFi devices,
the default. · WPA WPA2 · WPA2 WPA3 · WPA3 Personal AES The Apply and Discard
buttons display at the bottom of the page.
6. Click the Apply button. A message displays telling you that to save this
change, your device must restart WiFi connections.
7. Click Continue. Your settings are saved.
8. Reconnect your WiFi devices, if necessary, using the new WiFi credentials.
Use Your Nighthawk M6
35
User Manual
3
Manage Security
For information about WiFi security settings, see Manage WiFi security on page
?. The chapter covers the following topics: · Change the Nighthawk M6 web page
login settings · View connected devices from the Nighthawk M6 web page ·
Activate SIM security
36
Nighthawk M6
Change the Nighthawk M6 web page login settings
You can change the admin password for the Nighthawk M6 web page. To change the
login settings for the Nighthawk M6 web page: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > Administration > Set
Password. The password settings are displayed. 5. In the New Password field,
change the password used to log in as an administrator. Best practice is to
set a more secure password. Enter a maximum of 31 characters. 6. Click the
Apply button. Your settings are saved.
View connected devices from the Nighthawk M6 web page
To view the connected devices from the Nighthawk M6 web page: 1. From a
computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
Manage Security
37
User Manual
Nighthawk M6
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays.
Activate SIM security
You can create another level of security by configuring a PIN that you must
enter before you can manage the network connection or view SMS messages. To
activate SIM security: 1. From a computer or WiFi device that is connected to
the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case-
sensitive. The home page displays. 4. Select Settings > Security > SIM
Security. The SIM Security page displays. 5. Click the Activate button. 6.
Enter your PIN and click the Apply button. If you enter an incorrect PIN three
times, the SIM is blocked. If the SIM is blocked, contact your network service
provider to receive a PUK number to unblock the SIM.
Manage Security
38
User Manual
4
Maintain Your Nighthawk M6
The chapter covers the following topics: · Manage power with Power Manager ·
Extend battery life · View details about your device from the Nighthawk M6 ·
View details about your device from the Nighthawk M6 web page · Add and select
access point names (APN) · Enable DMZ · Update Nighthawk M6 software and
firmware
39
Nighthawk M6
Manage power with Power Manager
You can manage Nighthawk M6 power usage by enabling Power Manager. Power
Manager lets you select one of the following profiles: · Performance: Best
performance. Reduced battery life. · Balance: Best battery life. · AC-Powered:
Automatically selected when battery is removed and AC charger is
plugged in. 2.5G-BaseT Ethernet speed can be used in this mode (M6 Pro models
only). Select options under Battery Only or under Plugged In as required. To
enable Power Manager: 1. Press Power to wake the Nighthawk M6. The Home screen
appears.
2. Tap Power Manager. The Power Manager menu appears.
3. Select a profile that suits your needs.
Maintain Your Nighthawk M6
40
User Manual
Nighthawk M6
Extend battery life
The Nighthawk M6, by default, is configured to optimize battery life. The
following factors affect battery life: · Screen brightness. · Standby time. ·
Data throughput. · Mobile broadband signal strength (the better the signal,
the longer the battery life). · WiFi range.
To extend the battery life first use the Power Manager to specify a Balanced
power configuration. Then use any of the following methods: · Adjust WiFi
settings. · Adjust display settings. · Use tethered USB.
Adjust WiFi settings to optimize battery life
Set the standby timer to a shorter period to minimize the wait time when no
devices are connected to either WiFi network before going into standby mode
(the WiFi radios turn off).
NOTE: WiFi on the Nighthawk M6 will restart whenever you make a change to WiFi
settings. Please ensure your connected devices are set to automatically
reconnect to WiFi.
You can set the following WiFi options to optimize battery life: · Adjust the
display settings. See Set the display to increase battery life from the
Nighthawk M6 web page on page 43. · Set the WiFi standby to 5 minutes.
Maintain Your Nighthawk M6
41
User Manual
Nighthawk M6
Set the display to increase battery life from the Nighthawk M6
Dim the screen to reduce the LCD screen’s brightness level. Set the screen
time-out to a shorter period to reduce the amount of time the Nighthawk M6
waits without the LCD screen being touched before the screen turns blank. To
change the screen brightness from the Nighthawk M6: 1. Tap Settings
2. Tap Screen.
The settings screen for the network displays.
3. Slide the Screen Brightness slider to the brightness that you want. Your
settings are saved.
4. Tap Screen Timeout. The Screen Timeout screen displays.
5. Tap the field for the selection that you want.
Maintain Your Nighthawk M6
42
User Manual
Nighthawk M6
Your settings are saved.
Set the display to increase battery life from the Nighthawk M6 web page
Dim the screen to reduce the LCD screen’s brightness level. Set the screen
time-out to a shorter period to reduce the amount of time the Nighthawk M6
waits without the LCD screen being touched before the screen turns blank. To
adjust display settings to increase battery life from the Nighthawk M6 web
page: 1. From a computer or WiFi device that is connected to the Nighthawk M6,
launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > Advanced > Device. The
device settings page opens. 5. Adjust any of these settings: · Screen
Brightness . From the menu, select the screen brightness level. · Screen
Timeout . From the menu, select a shorter time period.
6. Click the Apply button. Your settings are saved.
Maintain Your Nighthawk M6
43
User Manual
Nighthawk M6
View details about your device from the Nighthawk M6
You can view details about your device such as the model number, software
version, and IMEI (International Mobile Station Equipment Identity). 1. Tap
Settings.
2. Tap More.
3. Tap Device Information. 4. Scroll down to view additional device information.
Maintain Your Nighthawk M6
44
User Manual
Nighthawk M6
View details about your device from the Nighthawk M6 web page
You can view details about your device such as the model number, software
version, and IMEI (International Mobile Station Equipment Identity).
To view details about your device from the Nighthawk M6 web page: 1. From a
computer or WiFi device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive.
The home page displays.
4. Select Settings > WiFi Status > Account. The About page displays details
for your Nighthawk M6.
Add and select access point names (APN)
Your Nighthawk M6 comes preconfigured with the access point name (APN) for
your network service provider. You can add additional APNs and select among
the configured APN for use by the Nighthawk M6. The Nighthawk M6 checks the
APN to determine the type of network connection to establish.
Add an APN for another network
To add an APN for another network: 1. From a computer or WiFi device that is
connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays.
3. Enter the administrator login password.
The default password is printed on the product label. The password is case-
sensitive.
Maintain Your Nighthawk M6
45
User Manual
Nighthawk M6
The home page displays.
4. Select Settings > Advanced > Cellular. The Add APN screen displays.
5. Click the Add button. The APN page displays.
6. Specify the APN name. The APN name is a label for display in the UI.
7. Specify the APN This step specifies the APN as defined by the carrier
8. Change the PDP (data protocol), if necessary: · IPV4 · IPV6 · IPV4V6
9. Change the PDP roaming protocol, if necessary: · None · IPV4 · IPV6 ·
IPV4V6
NOTE: PDP roaming protocol is the IP protocol used while you are roaming (for
example when you are traveling and the roaming network does not support IPv6).
10. Select the network authentication mode: · None · PAP · CHAP · PAPCHAP
11. Enter the name and password, if they are required for the network. 12.
Click the ADD button.
The entry is added to the table.
Maintain Your Nighthawk M6
46
User Manual
Nighthawk M6
Select an APN to use
To select an APN to use: 1. From a computer or WiFi device that is connected
to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case-
sensitive.
The home page displays.
4. Select Settings > Advanced Settings > Cellular. The APN page displays.
5. Select the Active radio button next to the APN entry.
The APN is selected.
Remove an APN entry
To remove an APN entry: 1. From a computer or WiFi device that is connected to
the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case-
sensitive.
The home page displays.
4. Select Settings > Advanced > Cellular. The APN page displays.
5. Select the box to the left of the APN. 6. Click the Delete button.
The APN is removed.
Maintain Your Nighthawk M6
47
User Manual
Nighthawk M6
Enable DMZ
In a demilitarized zone (DMZ) network configuration, a computer runs outside
the firewall in the DMZ. This computer intercepts incoming Internet traffic,
providing an extra layer of protection for the rest of the network, and
sending all incoming data to a particular IP address. To enable the DMZ and
designate a computer to screen incoming traffic: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The home page displays. 4. Select Settings > Advanced > Other. The
Nighthawk M6 page displays. 5. Scroll down to display the DMZ section. 6.
Check the Enable check box. 7. In the DMZ Address field, enter the IP address
of the computer to which you want all data sent. If the Nighthawk M6 is
tethered using a USB cable, this address is 192.168.1.4. If the Nighthawk M6
is connected using WiFi, the first WiFi client’s IP address is usually
192.168.1.XX.
NOTE: IPv6 addresses are not supported.
8. Click the Apply button. Your settings are saved.
Maintain Your Nighthawk M6
48
User Manual
Nighthawk M6
Update Nighthawk M6 software and firmware
The Nighthawk M6 automatically checks for new software or firmware updates
periodically. If an update becomes available, the Nighthawk M6 displays an
alert. You can also check for updates manually without receiving an alert.
Update Nighthawk M6 software and firmware in response to an Update Available
alert
To update the Nighthawk M6 software or firmware in response to an Update
Available alert: 1. To wake the device, press the Power button.
The home screen displays and shows the alert. 2. Tap Install/Update.
The update process starts. After the update install completes, the Nighthawk
M6 reboots.
Check for software updates from the Nighthawk M6
1. Tap Settings.
Maintain Your Nighthawk M6
49
User Manual
2. Tap More.
Nighthawk M6
3. Tap Software. The Software Update screen displays.
4. Tap the Check for updates now button. The screen refreshes showing any
available update.
5. Do one of the following: · If an upgrade is available and you want to
install it, tap the Update now button to install the update. · To postpone the
update, tap Postpone.
If you tap Update now, the update proceeds.
If you tap Postpone a message appears indicating the update will be postponed
for 4 hours. You can then click Apply to accept the postponed update.
When the wait period is complete, after you are prompted to continue the
update, tap Continue Update.
If the battery is low, a message appears indicating that the battery is low.
6. To continue, connect the device to the charge and click Apply. After the
update install completes, the Nighthawk M6 reboots.
Maintain Your Nighthawk M6
50
User Manual
Frequently Asked Questions
This chapter provides answers to possible questions about your Nighthawk M6: ·
Connect and disconnect devices and access the Internet · General Questions
51
Nighthawk M6
Connect and disconnect devices and access the Internet
Review these topics for answers to questions about connecting and
disconnecting devices and accessing the Internet.
What do I do if I can’t connect a device to the Nighthawk M6?
If you are experiencing problems connecting to the Nighthawk M6, try the
following suggestions: · Turn off your Nighthawk M6 and take the battery out,
wait 10 seconds, put the battery
back in, and turn your Nighthawk M6 on. · Restart your computer or Wifi
device. · Turn off or temporarily disable any security programs or firewalls.
· If possible, try using another computer or WiFi device to connect to your
Nighthawk
M6. If you can, then the problem is with the device that cannot connect, not
the Nighthawk M6.
What do I do if I can’t access the Internet?
If you are connected to the Nighthawk M6 but cannot connect to the Internet,
try the following suggestions: · Check the display status on the Nighthawk
M6’s LCD screen. · Make sure that network coverage is available in your area.
· Make sure that your SIM card is active and enabled with data services. ·
Wait one to two minutes for the Nighthawk M6 to initialize. · Check the device
information screen to make sure the SIM information is displayed
(to ensure the MHS sees the SIM). · Confirm that your account is activated and
that no other Internet connections are
active. · Switch your Nighthawk M6 off and on and restart your computer or
WiFi device.
Frequently Asked Questions
52
User Manual
Nighthawk M6
How do I disconnect from the mobile broadband network?
Turning off domestic data and international roaming disconnects your Nighthawk
M6 from the mobile broadband network. For more information, see Turn domestic
data off from the Nighthawk M6 web page on page 27.
How do I find out how many devices are connected to my Nighthawk M6 WiFi
networks?
The number next to the WiFi button on the Nighthawk M6’s LCD home screen is
the number of users (or devices) connected to your WiFi network. When you log
in to the Nighthawk M6 web page, the number of connected devices displays on
the home page.
What do I do if the No Signal icon displays?
If the No Signal icon ( ) displays, make sure that you are in your network
service provider’s coverage area.
Why can’t my device access the Nighthawk M6 web page when connected to a VPN?
To directly access the Nighthawk M6 web page hosted on the device, enter the
address http://192.168.1.1 in your browser.
What do I do if my Nighthawk M6 doesn’t connect to my service provider’s
network?
If your Nighthawk M6 does not connect to your service provider’s mobile
broadband network, try the following suggestions:
· Make sure that your SIM account is active. To check SIM status, contact your
wireless service provider.
· If you use a prepaid SIM card, make sure that the account balance is
positive. · If your Nighthawk M6 still does not connect, you might need to
create or update the
default connection profile.
To check the default connection profile settings: 1. From a computer or WiFi
device that is connected to the Nighthawk M6, launch a
web browser.
Frequently Asked Questions
53
User Manual
Nighthawk M6
2. Enter http://192.168.1.1. The Nighthawk M6 web page displays.
3. Enter the Nighthawk M6 password. The default password is printed on the
product label. The password is case sensitive. The home page displays.
4. Select Settings > Advanced > Cellular.
5. Review the settings.
How do I go back to the Nighthawk M6 web page?
To view the Nighthawk M6 web page: 1. From a computer or WiFi device that is
connected to the Nighthawk M6, launch a
web browser. 2. Enter http://192.168.1.1.
The Nighthawk M6 web page displays. 3. Enter the administrator login password.
The default password is printed on the product label. The password is case
sensitive. The Nighthawk M6 web page displays.
Frequently Asked Questions
54
User Manual
Nighthawk M6
What do I do if I forget my admin login password?
The default password is printed on the product label. The password is case
sensitive. The Nighthawk M6 web page URL is http://192.168.1.1.
If you changed the admin login password and can’t remember the password that
you created, you must reset the Nighthawk M6 back to factory defaults. See
Reset the Nighthawk M6 on page ?.
General Questions
Review these topics for answers to general questions about the Nighthawk M6.
Why isn’t my battery charging?
If you are in a low-coverage area, are transferring a lot of data, or left the
Nighthawk M6 in a hot location, the internal temperature of the Nighthawk M6
can rise above 45°C (113°F). In these conditions, the battery cannot be
charged due to safety limits with lithium-ion battery technology.
Check to ensure that the USB cable and the AC wall charger are connected
securely and are working correctly.
If the device is left charging for over seven consecutive days, the device
automatically enters a battery longevity mode to enhance the life of the
battery. During this state, the device stops charging and allows the battery
level to drop to and maintain at approximately 75 percent. The next time the
device is plugged into a charger, it resumes charging.
Why is the Signal Strength indicator always low?
Your Nighthawk M6’s reception is poor. Try moving it to a location with a
clear view of the sky (for example, near a window).
Frequently Asked Questions
55
User Manual
Nighthawk M6
Why is the download or upload speed slow?
Data transfer speed depends on signal strength and interfering radio sources
like electrical generators or other Nighthawk M6 WiFi devices. Review the
following possibilities:
· Check your signal strength and network type (for example, 5G is generally
faster than 4G).
· Check WiFi interference by powering the Nighthawk M6 off and on to find a
better WiFi channel.
· Change the WiFi band from 2.4 GHz to 5 GHz.
The LCD screen is not lit. How do I know if the Nighthawk M6 is still powered
on?
The LCD screen dims to save energy. The LED continues to blink slowly to
indicate that the Nighthawk M6 is still powered on. To wake the Nighthawk M6,
press the Power button.
How do I find my computer’s IP address?
The steps for finding your computer’s IP address depend on the operating
system. If your device runs an operating system not listed here, see the
appropriate operating system documentation.
Find the IP address on a Windows 10 device
To find the IP address on a Windows 10 device: 1. Open the command prompt
window:
a. Select Start > Run. b. Enter cmd or command and click the OK button.
2. At the command prompt, enter ipconfig and press Enter. 3. Write down the
IP address for the entry that relates to the WiFi network connection.
The IP address might be listed under IPv4 Address or something similar.
Find the IP address on a Mac OS X device
To find the IP address on a Mac OS X device:
1. From the Apple menu, select System Preferences > Network.
Frequently Asked Questions
56
User Manual
Nighthawk M6
2. Select the WiFi adapter.
The IP address is displayed in the right pane.
Find the IP address on devices running other operating systems
To find the IP address on devices running other operating systems:
Refer to the user documentation for your operating system or computer.
How do I find a device’s MAC address?
You must know the MAC address for a device when you are doing the following: ·
Assigning an IP address based on a MAC address (when using DHCP) · Allowing or
denying devices access to your WiFi network (MAC filtering)
Tip: The steps for finding a device’s MAC address depend on the operating
system. If your device runs an operating system not listed in the following
procedures, see the appropriate operating system documentation.
Find the MAC address on a Windows 10 device
To find the MAC address on a Windows 10 device: 1. Open the command prompt
window:
a. Select Start > Run. b. Enter cmd or command and click the OK button.
2. At the command prompt, enter ipconfig /all and press Enter. 3. Write down
the physical address for the entry that relates to the WiFi network
connection.
It appears as a series of numbers and letters. This is the MAC address of your
WiFi adapter.
Find the MAC address on a Mac OS X device
To find the MAC address on a Mac OS X device: 1. From the Apple menu, select
System Preferences > Network. 2. Select the WiFi adapter that is connecting to
the routing hardware. 3. Select Advanced.
Frequently Asked Questions
57
User Manual
Nighthawk M6
4. Select Ethernet. The Ethernet ID is displayed. This is the same as the MAC
address.
What do I do if the WiFi network name doesn’t appear in the list of networks?
If you do not see the Nighthawk M6’s WiFi networks from your WiFi-enabled
device, try these suggestions: · Refresh the list of networks. · If the LCD
screen is dark, the WiFi radio might be asleep. Press the Power button
to wake the Nighthawk M6. · Check the WiFi band settings and consider using
the 2.4 GHz band for increased
compatibility with client devices.
Frequently Asked Questions
58
User Manual
6
Specifications
This appendix covers the following topics: · Battery specifications ·
Nighthawk M6 and M6 Pro LCD display specifications · Mechanical specifications
· LTE and 5GNR transmission specifications · Nighthawk M6 mobile band
specifications · Nighthawk M6 Pro mobile band specifications · Features for
Nighthawk M6 product family · GPS support · Package contents · Port
specifications · Security specifications · WiFi specifications · Environmental
specifications
59
Nighthawk M6
Battery specifications
Battery specifications: · Removable Li-ion battery · Up to 9 hours of
continuous usage
NOTE: 9+ hour battery life is achieved by the following heaviest case: stream
YouTube for 1 hour, followed by 30 minutes of idle time, and then repeat for
over 9 hours.
Specifications
60
User Manual
Nighthawk M6
Nighthawk M6 and M6 Pro LCD display specifications
The following table indicates the Nighthawk M6 and M6 Pro LCD display specifications.
Device
Display Type
Nighthawk M6 (MR6100 and MR6150)
2.4 in. (6.1 cm.) LCD touch screen
Nighthawk M6 Pro (MR6400, MR6450, and MR6500) 2.8 in. (7.1 cm.) LCD touch screen.
Specifications
61
User Manual
Nighthawk M6
Mechanical specifications
Table 3. Physical dimensions Parameter Weight
Dimension
· MR6500, MR6400, MR6450, and MR6550: 250 g (.55 lb) with battery
· MR6110 and MR6150: 250 g (.55 lb) with battery
Length Width Thickness
105 mm (4.15 in.)
105 mm (4.15 in.)
21mm (0.84 in.) excluding the feet, which are 0.55 mm high (0.2 in)
–
LTE and 5GNR transmission specifications
Transmission specifications
The following tables indicate the LTE and 5GNR transmission characteristics.
Table 4. LTE transmission characteristics for MR6150 and MR6550
Frequency (MHz) 1850-1910 1710-1755 824-849 2500-2570 698-716 777-787
Bands B2 B4 B5 B7 B12 B13
Ext Ant Gain (dBi) 4 4 4 4 4 4
Specifications
62
User Manual
Nighthawk M6
Table 4. LTE transmission characteristics for MR6150 and MR6550 (Continued)
Frequency (MHz) 788-798 1850-1915 814-849 2305-2315 2496-2690 3550-3700 1710-1780 663-698
Bands B14 B25 B26 B30 B41 B48 B66 B71
Ext Ant Gain (dBi) 4 4 4 1.05 4 0.17 4 4
–
Table 5. LTE transmission characteristics for MR6400
Frequency (MHz)
1850-1910 1710-1755 824-849 2500-2570 698-716 777-787 788-798 1850-1915
814-849 2305-2315 2496-2690 3550-3700 1710-1780 663-698
Bands
B2 B4 B5 B7 B12 B13 B14 B25 B26 B30 B41 B48 B66 B71
Ext Ant Gain (dBi) 4 4 4 4 4 4 4 4 4 1.05 4 0.17 4 4
–
Specifications
63
User Manual
Nighthawk M6
Table 6. LTE transmission characteristics for MR6500
Frequency (MHz)
Bands
1850-1910
B2
1710-1755
B4
824-849
B5
2500-2570
B7
698-716
B12
788-798
B14
717-728
B29
2305-2315
B30
3550-3700
B48
1710-1780
B66
Ant1
Ant2
Ext Ant
Gain (dBi) Gain (dBi) Gain (dBi)
0.67
0.45
4
0.67
0.54
4
-0.88
-1.60
4
0.39
-0.53
4
-0.83
-1.60
4
-0.83
-1.60
4
-0.83
-1.60
4
1.03
1.05
1.05
0.17
1.66
0.17
0.67
0.54
4
–
Table 7. 5GNR transmission characteristics for MR6150 and MR6550
Frequency (Mhz) 1850-1919 824-849 698-716 788-798 1850-1915 2305-2315 2496-2690 3550-3700 1710-1780 663-698 3300-3550 3700-4200
Bands n2 n5 n12 n14 n25 n30 n41 n48 n66 n71 n77
Ext Ant Gain (dBi) 4 4 4 4 4 1.05 4 0.17 4 4 4
–
Specifications
64
User Manual
Nighthawk M6
Table 8. 5GNR transmission characteristics for MR6400
Frequency (Mhz) 1850-1919 824-849 698-716 788-798 1850-1915 2305-2315 2496-2690 3550-3700 1710-1780 663-698 3300-3550 3700-4200
Bands n2 n5 n12 n14 n25 n30 n41 n48 n66 n71 n77
Ext Ant Gain (dBi) 4 4 4 4 4 1.05 4 0.17 4 4 6
–
Table 9. 5GNR transmission characteristics for MR6500
Frequency (Mhz) Bands
1850-1919
n2
824-849
n5
698-716
n12
788-798
n14
2305-2315
n30
1710-1780
n66
3300-3550
n77
3700-4200
Ant1 Gain (dBi) Ant1 Gain (dBi)
0.67
0.45
-0.88
-1.60
-0.83
-1.60
-0.83
-1.60
1.03
1.05
0.67
0.54
0.17
1.66
Ant5 Gain (dBi)
0.98
Ant6 Gain (dBi) Ext Ant Gain (dBi)
4
4
4
4
1.05
4
3.31
6
–
Nighthawk M6 mobile band specifications
This section provides mobile band specifications for the Nighthawk devices.
Specifications
65
User Manual
Nighthawk M6
To view tables that show the mobile band specifications for the Nighthawk
devices, use the camera app on your mobile device to select the following QR
code.
Nighthawk M6 Pro mobile band specifications
This section provides mobile brand specifications for the Nighthawk devices.
To view tables that show the mobile band specifications for the Nighthawk
devices, use the camera app on your mobile device to select the following QR
code.
Specifications
66
User Manual
Nighthawk M6
Features for Nighthawk M6 product family
Insight Pro Feature Support
· MR6500-1A1NAS · MR6110-1A1NAS
WiFi 6E (6 GHz) Feature Support
To view tables that show the feature support for the Nighthawk devices, use
the camera app on your mobile device to select the following QR code.
2.5G BaseT Feature Support
To view tables that show the feature support for the Nighthawk devices, use
the camera app on your mobile device to select the following QR code.
Specifications
67
User Manual
Nighthawk M6
GPS support
Some Nighthawk M6 devices provide GPS support. When using these devices, you can enable GPS from the Nighthawk M6 device as described in Enable GPS from the Nighthawk M6 on page 25.
The following table indicates which Nighthawk M6 devices support GPS.
Table 10. Nighthawk M6 and M6 Pro GPS support
Device MR6110 MR6400 MR6500 MR6150 MR6450 MR6550
GPS support Yes Yes Yes No No No
–
Specifications
68
User Manual
Nighthawk M6
Package contents
Your Nighthawk M6 package includes the following: · Nighthawk M6 Pro or
Nighthawk M6 · Removable lithium ion battery · AC charger · USB Type-C cable ·
Quick Start Guide · Safety leaflet
Port specifications
The Nighthawk M6 provides one USB 3.2 Type-C port and an Ethernet port.
Security specifications
Supported security features: · WiFi security encryption · VPN pass-through ·
NAT firewall · Password protected administration UI
Specifications
69
User Manual
Nighthawk M6
WiFi specifications
WiFi support
· WiFi 802.11a/b/g/n/ac/ax, 2×2 MIMO · 2.4/5/6 GHz Standalone
The following restrictions apply in :
AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT
/RO/SI/SK/TR/FI/SE/CH/UK(NI)/HR:
· Operation in 5150MHz to 5350MHz is restricted to indoor use only. · This
device is restricted to indoor use only when operating in the 5945MHz to
6425MHz band (to the extent that these frequencies are made available). · This
equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body. · SAR is measured with the device at 5
mm to the body, while transmitting at the
highest certified output power level in all frequency bands of the device. The
maximum SAR value is 1.652 W/kg (body) averaged over 10 gram of tissue.
Table 11. GHz specifications
GHz 5GHz 6GHz
Range 5150-5350MHz 5945-6425MHz
–
Specifications
70
User Manual
Nighthawk M6
Environmental specifications
Table 12. Recommended operating and storage temperatures
Environment Operating temperature
Storage temperature
Temperature
0°C to 35°C (32 F to 95°F)
10°C to +60°C (14°F to 140°F)
–
Specifications
71
User Manual
References
- English - NETGEAR Communities
- NETGEAR Support | NETGEAR
- English - NETGEAR Communities
- NETGEAR Privacy Policy | NETGEAR
- NETGEAR Privacy Policy | NETGEAR
- NETGEAR Terms and Conditions | NETGEAR
- NETGEAR Terms and Conditions | NETGEAR
- Insight Pro for Mobile Hotspot Management | NETGEAR
- NETGEAR Support | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>