Seneo PA193A Fast Wireless Charger Stand User Manual

June 5, 2024
Seneo

Seneo PA193A Fast Wireless Charger Stand

Seneo-PA193A-Fast-Wireless-Charger-Stan-Product

3 CHARGING MODES

Seneo-PA193A-Fast-Wireless-Charger-Stan-fig-4

Seneo-PA193A-Fast-Wireless-Charger-Stan-fig-6

Installation

Seneo-PA193A-Fast-Wireless-Charger-Stan-fig-1
Seneo-PA193A-Fast-Wireless-Charger-Stan-fig-2Working Status

Seneo-PA193A-Fast-Wireless-Charger-Stan-fig-3

For a fast and safe charge, using Quick Charge 2.0 or 3.0 Wall Charger is highly recommended. Other Chargers may not work well with this device.

Attentions

  • Please keep the charger away from water or other liquids.
  • Do not place the charger too close to any magnetic stripe or clip card (D card, bank cards, etc.) to avoid magnetic failure.
  • This item is not to be used on any mobile device with metal plates, as it will cause extreme heat that may burn and/or damage the device.
  • Fast charge via the plug and USB charging cable (both support QC 2.0 or QC 3.0).
  • Usually, we recommend that the thickness of the phone case should be within 3 mm (0.12 inches). It wOuld not charge if the thickness is more than 5 mm (0.19 inch).
  • The standard temperature of wireless charger Ql is 130°F, but the temperature of our products should be controlled within 113°F. The charger will cut off the current when abnormal heating occurs. Please contact us it any damage occurs.
  • We recommend that you turn off the power-consumption software before charging to effectively prevent the phone from overheating. When the temperature exceeds 113 F during charging, it is normal for the charging speed to slow down.
  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
    • This device may not cause harmful interference, and
    • This device must accept any interference received including interference that may cause undesired operation
  • FCC Radiation Exposure Statement
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Seneo User Manuals

Related Manuals