Nedis HPBT3052WT Fully Wireless Earphones User Manual

: June 5, 2024
: nedis

HPBT3052WT Fully Wireless Earphones

Nedis HPBT3052WT Fully Wireless Earphones

User Manual

Preface

Thank you for purchasing the Nedis HPBT3052WT.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis HPBT3052WT is a pair of fully wireless earphones.

The product can be paired with any Bluetooth enabled audio/video device.

The earphones can be charged up to 4 times in the fully charged case.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Fully Wireless Earphones

---|---

Article number

|

HPBT3052WT

Power input

|

5 VDC / 0.3 A

Bluetooth® version

|

5.0

Bluetooth® frequency range

|

2402 – 2480 MHz

Frequency response

|

20 – 20,000 Hz

Max. radio transmit power

|

4 dBm

Impedance

|

16 Ω

Driver size

|

10 mm

Voice control

|

Siri, Google Assistant

Battery type

|

Lithium-Polymer (earphones)

Lithium-Polymer (charging case)

Charging time

|

Up to 2 hours

Case recharges

|

Up to 4 times

Battery capacity earphones

|

2 x 30 mAh

Battery capacity charging case

|

300 mAh

Play time

|

Up to 2.5 hours

Waterproof

|

No

Main parts (image A)

A

1. Lid

2. Micro USB port

3. Left earphone slot

4. Charging indicator LED

5. Status indicator LED

6. Left earphone button

7. Right earphone slot

8. Right earphone button

9. Micro USB cable

Safety instructions

WARNING

|

To prevent possible hearing damage, do not listen at high volume levels for long periods.

---|---

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas .
Charge the battery for at least 2 hours when you use it for the first time.
Only use the provided USB charging cable.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Disconnect the product from the power source and other equipment if problems occur.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.

Explanation of the safety symbols on the product

Icon

|

Description

---|---

|

Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Pairing the earphones to a Bluetooth audio source

1. Take the earphones out of the charging case. The earphones switch on automatically.

Press and hold both earphone buttons A 6, A 8 for 2 seconds to switch the earphones on manually.

2. The status indicator LED A 5 blinks red and blue to indicate pairing mode is active.

3. Enable Bluetooth on the device you want to pair the earphones with.

4. Select “ HPBT3052WT ” from the list of available Bluetooth devices on your device.

Charging the product

1. Plug the Micro USB cable A 9 into the Micro USB port A 2 of the charging case.

2. Plug the other end of A 9 into a computer or power adapter.

3. Plug the power adapter into a power outlet.

The charging indicator LED A 4 lights up red when charging.
A 4 switches off when the case is fully charged.

4. Place the earphones into the respective slots A 3 A 7 and close the lid A 1 to charge the earphones.

5. The status indicator LED A 5 on the earphones lights up red.

6. A 5 switches off when the earphones are fully charged.

The earphones and the charging case can charge simultaneously.

Use

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, press A 6 or A 8.
To reject an incoming call, press and hold A 6 or A 8 for 2 seconds.
To end a call, press A 6 or A 8.

Controlling the music

Press A 6 or A 8 to play or pause the music.
Double press A 8 to skip to the next track.
Double press A 6 to skip to the previous track.

Add Siri/Google Assistant function

Press and hold A 6 or A 8 for 2 seconds to activate Siri/Google Assistant.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.
Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT3052WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/hpbt3052wt#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---